Earth-moving machinery -- Operator training -- Content and methods

ISO 7130:2013 provides a basis for content and methods used for operator training for earth-moving machinery as defined in ISO 6165. This training in turn provides the basis for developing operators of earth-moving machinery who are knowledgeable and understand the manufacturer's instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating the competency of a person who operates and could perform routine maintenance of earth-moving machinery, but does not specify any procedure for proficiency testing or assessment of the operator's competence of operating and maintaining earth-moving machinery. It is not intended to substitute for national or regional requirements or regulations related to operator training.

Engins de terrassement -- Formation du conducteur -- Contenu et méthodes

General Information

Status
Published
Publication Date
10-Apr-2013
Current Stage
6060 - International Standard published
Start Date
26-Mar-2013
Completion Date
11-Apr-2013
Ref Project

RELATIONS

Buy Standard

Standard
ISO 7130:2013 - Earth-moving machinery -- Operator training -- Content and methods
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 7130
Second edition
2013-04-15
Earth-moving machinery — Operator
training — Content and methods
Engins de terrassement — Formation du conducteur — Contenu et
méthodes
Reference number
ISO 7130:2013(E)
ISO 2013
---------------------- Page: 1 ----------------------
ISO 7130:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 7130:2013(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International

Standards adopted by the technical committees are circulated to the member bodies for voting.

Publication as an International Standard requires approval by at least 75 % of the member bodies

casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 7130 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee

SC 3, Machine characteristics, electrical and electronic systems, operation and maintenance.

This second edition cancels and replaces the first edition (ISO 7130:1981), which has been technically revised.

© ISO 2013 – All rights reserved iii
---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 7130:2013(E)
Earth-moving machinery — Operator training — Content
and methods
1 Scope

This International Standard provides a basis for content and methods used for operator training for

earth-moving machinery as defined in ISO 6165. The training in turn provides the basis for developing

operators of earth-moving machinery who are knowledgeable and understand the manufacturer’s

instructions for safe and proper operation and routine maintenance. It establishes criteria for evaluating

the competency of a person who operates and could perform routine maintenance of earth-moving

machinery, but does not specify any procedure for proficiency testing or assessment of the operator’s

competence of operating and maintaining earth-moving machinery. It is not intended to substitute for

national or regional requirements or regulations related to operator training.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

ISO 6165, Earth-moving machinery — Basic types — Identification and terms and definitions

ISO 6405-1, Earth-moving machinery — Symbols for operator controls and other displays — Part 1:

Common symbols

ISO 6405-2, Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Specific

symbols for machines, equipment and accessories
ISO 9244, Earth-moving machinery — Machine safety labels — General principles
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 6165 and the following apply.

3.1
operator

person who operates and could perform routine maintenance of earth-moving machinery

Note 1 to entry: “Routine” includes items as defined by the manufacturer, e.g. tyre pressure, fluid levels.

3.2
simulator
system that imitates the experience of operating an earth-moving machine
3.3
trainee
person receiving training
3.4
trainer

person qualified to instruct a trainee to properly operate and perform routine maintenance of earth-

moving machinery
© ISO 2013 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO 7130:2013(E)
3.5
training

process of acquiring knowledge and developing skills and competency to operate and perform routine

maintenance of earth-moving machinery
3.6
work site

place where earth-moving machines are operated or where routine maintenance is performed

4 Requirements
4.1 General

The purpose of operator training is to impart to the trainee the knowledge and skills necessary for

proper operation and routine maintenance of earth-moving machinery according to the manufacturer’s

instructions. If an operator is required to be qualified, the training also needs to be made for the purpose

of covering qualification.

The content and duration of operator training will depend upon the machine family, application, and

complexity of the individual machine and its attachment, if applicable, and the initial level of trainee

knowle
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.