ISO/ASTM 52933

Additive manufacturing — Environment, health and safety — Test method for the hazardous substances emitted from material extrusion type 3D printers in the non-industrial places

Fabrication additive — Environnement, santé et sécurité — Méthode d'essai pour les substances dangereuses émises par les imprimantes 3D de type à extrusion de matière dans les lieux non industriels

General Information

• Status: Not Published
• ICS: 13.040.30 - Workplace atmospheres
• ICS: 13.100 - Occupational safety. Industrial hygiene
• ICS: 25.030 - Additive manufacturing
• Technical Committee: ISO/TC 261 - Additive manufacturing
• Drafting Committee: ISO/TC 261/JG 68 - Joint ISO/TC 261-ASTM F 42 Group: EH&S for 3D printers
• Current Stage: 6000 - International Standard under publication
• Completion Date: 20-Feb-2024

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/ASTM
FDIS
52933
ISO/TC 261
Additive manufacturing —
Secretariat: DIN
Environment, health and safety
Voting begins on:
— Test method for the hazardous
2023-12-25
substances emitted from material
Voting terminates on:
extrusion type 3D printers in the
2024-02-19
non-industrial places
Fabrication additive — Environnement, santé et sécurité —
Méthode d'essai pour les substances dangereuses émises par les
imprimantes 3D de type à extrusion de matière dans les lieux non
industriels
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/ASTM FDIS 52933:2023(en) © ISO/ASTM International 2023

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/ASTM FDIS 52933:2023(en)
International
Standard
ISO/ASTM
FDIS
52933
ISO/TC 261
Additive manufacturing —
Secretariat: DIN
Environment, health and safety
Voting begins on:
— Test method for the hazardous
substances emitted from material
Voting terminates on:
extrusion type 3D printers in the
non-industrial places
Fabrication additive — Environnement, santé et sécurité —
Méthode d'essai pour les substances dangereuses émises par les
imprimantes 3D de type à extrusion de matière dans les lieux non
industriels
COPYRIGHT PROTECTED DOCUMENT
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
© ISO/ASTM International 2023
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
IN ADDITION TO THEIR EVALUATION AS
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
ISO copyright office ASTM International TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: [phone] Phone: [phone]
Fax: [phone]
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.astm.org
Published in Switzerland Reference number
ISO/ASTM FDIS 52933:2023(en) © ISO/ASTM International 2023

© ISO/ASTM International 2023 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/ASTM FDIS 52933:2023(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Hazardous substance targets and major factors . 3
5 Relevant test standards. 3
6 Sampling conditions .
...

Style Definition
...
Style Definition
...
Style Definition
2023-11-21
...
Style Definition
...
ISO/ASTM FDIS 52933:2023(E)
Style Definition
...
Style Definition
ISO /TC 261 & ASTM F 42 .
Style Definition
...
Secretariat: DIN
Style Definition
...
Date: 2024-xx Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Additive manufacturing — Environment, health and safety — Test
Style Definition
...
method for the hazardous substances emitted from material
Style Definition
...
extrusion type 3D printers in the non-industrial places
Style Definition
...
Style Definition
Fabrication additive — Environnement, santé et sécurité — Méthode d'essai pour les substances .
dangereuses émises par les imprimantes 3D de type à extrusion de matière dans les lieux non industriels
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
FDIS stage
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...

---------------------- Page: 1 ----------------------
ISO/ASTM FDIS 52933:20232024(E)
Formatted: Header, Line spacing: single
Formatted: Header distance from edge: 1.27 cm, Footer
© ISO/ASTM 20232024
distance from edge: 0.5 cm
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
Formatted: Default Paragraph Font
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
Formatted: Indent: Left: 0 cm, Right: 0 cm, Space Before: 0
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
pt, No page break before, Adjust space between Latin and
be requested from either ISO at the address below or ISO’s member body in the country of the requester. In the
Asian text, Adjust space between Asian text and numbers
United States, such requests should be sent to ASTM International.
ISO copyright office ASTM International
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: + 41 22 749 01 11 Phone: [phone]
Formatted: French (France)
Formatted: French (France)
Fax: [phone] Fax: [phone]
Formatted: French (France)
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.astm.org
E-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
Formatted: Font: 11 pt
Formatted: Normal, Space After: 0 pt, Line spacing: single
ii © ISO/ASTM International 2023 – All rights
reserved
© ISO/ASTM 2024 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/ASTM FDIS 52933:20232024(E)
Formatted: Header, Left, Line spacing: single
Formatted: Adjust space between Latin and Asian text, Adjust
Contents
space between Asian text and numbers
Foreword . v
Introduction.vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Hazardous substance targets and major factors . 4
5 Relevant test standards . 4
6 Sampling conditions . 5
6.1 Sampling location .
...