Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps

ISO 16902-1:2003 establishes a test code based on ISO 9614-1 and ISO 9614-2 for determining the sound power levels of a hydraulic fluid power pump under controlled conditions of installation and operation. The sound power level will include sound power radiated by any piping within the measurement surface. ISO 16902-1:2003 is suitable for providing a basis for comparing the airborne noise levels of any type of pump that is normally used to convert rotary mechanical power to hydraulic fluid power, incorporating valves, solenoids, drive gears, couplings or any other auxiliary device normally fitted in service.

Transmissions hydrauliques — Code d'essai pour la détermination des niveaux de puissance acoustique à l'aide des techniques d'intensimétrie: Méthode d'expertise — Partie 1: Pompes

L'ISO 16902-1:2002 établit un code d'essai basé sur l'ISO 9614-1 et l'ISO 9614-2 pour la détermination des niveaux de puissance acoustique d'une pompe hydraulique dans des conditions d'installation et de fonctionnement commandées. Le niveau de puissance acoustique comprend la puissance acoustique émise par toute tuyauterie à l'intérieur de la surface de mesurage. L'ISO 16902-1:2002 permet de fournir une base de comparaison des niveaux de bruit aérien de tout type de pompe normalement utilisée pour convertir la puissance mécanique rotative en puissance hydraulique, comprenant des organes de distribution et de régulation, électroaimants, mécanismes d'entraînement, accouplements ou tout autre dispositif auxiliaire généralement monté en service.

Fluidna tehnika – Hidravlika – Postopek za ugotavljanje jakosti hrupa črpalk ob uporabi tehnike intenzimetrije: ekspertna metoda – 1. del: Črpalke

General Information

Status
Published
Publication Date
19-May-2003
Current Stage
9020 - International Standard under periodical review
Start Date
15-Jan-2024
Completion Date
15-Jan-2024

Relations

Buy Standard

Standard
ISO 16902-1:2005
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 16902-1:2003 - Hydraulic fluid power -- Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 16902-1:2003 - Transmissions hydrauliques -- Code d'essai pour la détermination des niveaux de puissance acoustique a l'aide des techniques d'intensimétrie: Méthode d'expertise
French language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 16902-1:2005
01-november-2005
)OXLGQDWHKQLND±+LGUDYOLND±3RVWRSHN]DXJRWDYOMDQMHMDNRVWLKUXSDþUSDONRE
XSRUDELWHKQLNHLQWHQ]LPHWULMHHNVSHUWQDPHWRGD±GHOýUSDONH
Hydraulic fluid power -- Test code for the determination of sound power levels of pumps
using sound intensity techniques: Engineering method -- Part 1: Pumps
Transmissions hydrauliques -- Code d'essai pour la détermination des niveaux de
puissance acoustique à l'aide des techniques d'intensimétrie: Méthode d'expertise --
Partie 1: Pompes
Ta slovenski standard je istoveten z: ISO 16902-1:2003
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
23.100.10 +LGUDYOLþQHþUSDONHLQPRWRUML Pumps and motors
SIST ISO 16902-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 16902-1:2005

---------------------- Page: 2 ----------------------

SIST ISO 16902-1:2005


INTERNATIONAL ISO
STANDARD 16902-1
First edition
2003-05-01


Hydraulic fluid power — Test code for the
determination of sound power levels
using sound intensity techniques:
Engineering method —
Part 1:
Pumps
Transmissions hydrauliques — Code d'essai pour la détermination des
niveaux de puissance acoustique à l'aide des techniques
d'intensimétrie: Méthode d'expertise —
Partie 1: Pompes




Reference number
ISO 16902-1:2003(E)
©
ISO 2003

---------------------- Page: 3 ----------------------

SIST ISO 16902-1:2005
ISO 16902-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 16902-1:2005
ISO 16902-1:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 Sound power level determination . 2
5 Installation and mounting conditions . 2
5.1 General. 2
5.2 Pump mounting. 2
5.3 Drive coupling . 2
5.4 Hydraulic circuit . 2
6 Measurement surfaces .
...

INTERNATIONAL ISO
STANDARD 16902-1
First edition
2003-05-01


Hydraulic fluid power — Test code for the
determination of sound power levels
using sound intensity techniques:
Engineering method —
Part 1:
Pumps
Transmissions hydrauliques — Code d'essai pour la détermination des
niveaux de puissance acoustique à l'aide des techniques
d'intensimétrie: Méthode d'expertise —
Partie 1: Pompes




Reference number
ISO 16902-1:2003(E)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO 16902-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 2 ----------------------
ISO 16902-1:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 Sound power level determination . 2
5 Installation and mounting conditions . 2
5.1 General. 2
5.2 Pump mounting. 2
5.3 Drive coupling . 2
5.4 Hydraulic circuit . 2
6 Measurement surfaces . 3
6.1 General. 3
6.2 Piping . 3
6.3 Pump mounting. 3
6.4 Reflecting plane . 8
6.5 Drive motor and drive couplings. 9
7 Operating conditions . 9
8 Measurement uncertainty.
...

NORME ISO
INTERNATIONALE 16902-1
Première édition
2003-05-01



Transmissions hydrauliques — Code
d'essai pour la détermination des niveaux
de puissance acoustique à l'aide des
techniques d'intensimétrie: Méthode
d'expertise —
Partie 1:
Pompes
Hydraulic fluid power — Test code for the determination of sound power
levels using sound intensity techniques: Engineering method —
Part 1: Pumps




Numéro de référence
ISO 16902-1:2003(F)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO 16902-1:2003(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2003
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2003 — Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 16902-1:2003(F)
Sommaire Page
Avant-propos. iv
Introduction . v
1 Domaine d'application. 1
2 Références normatives. 1
3 Termes et définitions . 2
4 Détermination du niveau de puissance acoustique . 2
5 Conditions d’installation et de montage. 2
5.1 Généralités. 2
5.2 Support de pompe . 2
5.3 Accouplement de transmission. 2
5.4 Circuit hydraulique . 2
6 Surfaces de mesurage. 3
6.1 Généralités. 3
6.2 Tuyauterie . 3
6.3 Montage de la pompe . 3
6.4 Plan réfléchissant . 3
6.5 Moteurs d’entraînement et accouplement de transmission. 9
7 Conditions de fonctionnement .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.