SIST EN 1034-2:2006+A1:2010
(Main)Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 2: Entrindungstrommeln
Diese Europäische Norm gilt für Entrindungstrommeln, bestehend aus Trommel, Antrieb, Kraftübertragungselementen,
Stützrädern und Steuerung, die zur Verwendung in Entrindungsanlagen für die Papierherstellung
bestimmt sind und ist in Verbindung mit !EN 1034-1:2000+A1:2010" anzuwenden werden. Sie behandelt alle
signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Entrindungstrommeln
zutreffen, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers
verwendet werden (siehe Abschnitt 4). Diese Norm gilt nicht für die in Entrindungsanlagen verwendeten Sägen und
Förderer für Hölzer und Rinde.
Diese Europäische Norm gilt nicht für Entrindungstrommeln, die hergestellt wurden, bevor CEN diese Europäische
Norm veröffentlichte.
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 2: Tambours écorceurs
La présente Norme européenne s’applique aux tambours écorceurs comprenant le tambour, l’entraînement,
les éléments de transmission de force, les roues support et la commande, qui sont destinés à être employés
dans des installations d’écorçage pour la fabrication du papier et doit être appliquée conjointement avec
l’!EN 1034-1:2000+A1:2010". Elle traite de l’ensemble des phénomènes dangereux significatifs, des situations
et événements dangereux qui concernent les tambours écorceurs, lorsque ceux-ci sont utilisés normalement et dans
les conditions d’utilisation abusives qui peuvent raisonnablement être prévues par le fabricant (voir Article 4). Cette
norme n’est pas applicable aux scies et convoyeurs pour les rondins et les écorces utilisés dans des installations
d’écorçage.
Cette Norme européenne n’est pas applicable aux tambours écorceurs qui ont été fabriqués avant sa publication
par le CEN.
Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 2. del: Lupilniki skorje
Ta evropski standard velja za lupilnike skorje, sestavljene iz valja, pogona, elementov za prenos električne energije, podpornih koles in krmilnih sistemov, ki so namenjeni uporabi v obratih za lupljenje pri izdelavi papirja, in se uporablja skupaj z EN 1034-1:2000+A1:2010. Obravnava vse velike nevarnosti, nevarna situacije in primere, pomembne za lupilnike skorje, ko se uporabljajo kot predvideno in pod pogoji, ki jih proizvajalec predvidi (glej Klavzulo 4). Ta standard ne velja za opremo za žaganje ali sisteme za prenašanje hlodov ali skorje, ki se uporabljajo v obratih za lupljenje. Ta evropski standard ne velja za lupilnike skorje, ki so bili izdelani pred datumom, ko je CEN objavil ta evropski standard.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 2: EntrindungstrommelnSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 2: Tambours écorceursSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-2:2005+A1:2009SIST EN 1034-2:2006+A1:2010en,fr01-februar-2010SIST EN 1034-2:2006+A1:2010SLOVENSKI
STANDARD
SIST EN 1034-2:2006+A1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-2:2005+A1
December 2009 ICS 85.100 Supersedes EN 1034-2:2005English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 2: Tambours écorceurs
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 2: Entrindungstrommeln This European Standard was approved by CEN on 10 November 2005 and includes Amendment 1 approved by CEN on 17 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-2:2005+A1:2009: ESIST EN 1034-2:2006+A1:2010
EN 1034-2:2005+A1:2009 (E) 2 Contents Page Foreword .3Introduction .41Scope .42Normative references .43Terms and definitions .54List of significant hazards .65Safety requirements and/or measures .75.1General .75.2
Mechanical hazards .85.3Workplaces, access stairs, catwalks, passageways .85.4Start-up warning device .85.5Emergency stop device .95.6Means for isolation and energy dissipation, prevention of unexpected start-up .95.7Equipment and measures for maintenance and repair and cleaning .95.8Control systems and actuators .95.9Noise .95.10Integrated lighting. 105.11Ergonomic principles . 105.12Electrical equipment . 105.13Hydraulic equipment . 105.14Pneumatic equipment . 105.15Wood dust . 106Verification of compliance with safety requirements and/or measures . 107Information for use . 11Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 12Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 13 Figure Figure 1 — Example of a barking drum . 6
SIST EN 1034-2:2006+A1:2010
EN 1034-2:2005+A1:2009 (E) 3 Foreword This document (EN 1034-2:2005+A1:2009) has been prepared by Technical Committee CEN/TC 198 “Printing and paper machinery - Safety”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 17 November 2009. This document supersedes EN 1034-2:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1034-2:2006+A1:2010
EN 1034-2:2005+A1:2009 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. For machines that have been designed and built according to the provisions of this type C standard, the following stipulation applies: when provisions of this type C standard are different from those which are stated in type A or B standards or from provisions made in !EN 1034-1:2000+A1:2010", the provisions of this type C standard take precedence over the provisions of the other standards. 1 Scope This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs. EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design. EN 626-1:1994, Safety of machinery — Reduction of risk to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers. EN 626-2:1996, Safety of machinery — Reduction of risk to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures. EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards. EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design. EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics. SIST EN 1034-2:2006+A1:2010
EN 1034-2:2005+A1:2009 (E) 5 EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics. !EN 1034-1:2000+A1:2010", Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements. EN 1050:1996, Safety of machinery — Principles for risk assessment. EN 1837:1999, Safety of machinery — Integral lighting of machines. EN 13023:2003, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy categories 2 and 3. EN 60204-1:1997, Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:1997). EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989). EN 61000-6-2:2001, Electromagnetic compatibility (EMC) — Part 6-2: Generic standards; immunity for industrial environment (IEC 61000-6-2:1999, modified). EN ISO 11957:1996, Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996). EN ISO 12100-1:2003, Safety of machinery — Basic concepts — General principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003). EN ISO 12100-2:2003, Safety of machinery — Basic concepts — General principles for design — Part 2: Technical principles and specifications (ISO 12100-2:2003). EN ISO 14122-1:2001, Safety of machinery — Permanent means of access to machinery — Part
1: Choice of a fixed means of access
between two levels (ISO 14122-1:2001). EN ISO 14122-2:2001, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and gangways (ISO 14122-2:2001). EN ISO 14122-3:2001, Safety of machinery — Permanent means of access to machinery — Part 3: Stair, stepladders and guard-rails (ISO 14122-3:2001). EN ISO 14122-4:2004, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2001). 3 Terms and definitions For the purposes of this document, the definitions of !EN 1034-1:2000+A1:2010", EN ISO 12100-1:2003 and the following definition apply: 3.1
barking drum machine formed of a cylindrical hollow tube (drum) through which logs are fed. The rotation of the drum causes the logs to fall and be pushed against each other and rubbed against the inner wall of the drum causing the bark to break and fall off. Figure 1 illustrates the principle of a barking drum in a debarking plant
SIST EN 1034-2:2006+A1:2010
EN 1034-2:2005+A1:2009 (E) 6
Key 1
Drum
2
Drive
3
Supporting wheels 4
Discharge side 5, 6, 7, 8
Log conveyor belts
NOTE: Safety devices are not shown. Figure 1 — Example of a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.