SIST EN 438-1:2000

Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specifications (ISO 4586-1:1987, modified)

This standard classifies decorative laminated sheets according to their performance and main recommended fields of application, and provides also for materials of special characteristics, for example postformability or defined reaction to fire

Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze - Teil 1: Spezifikation (ISO 4586-1:1987, modifiziert)

Diese Norm klassifiziert dekorative Schichtstoffplatten nach ihrer Beanspruchbarkeit und den hauptsächlich empfohlenen Anwendungsgebieten. Materialien mit speziellen Eigenschaften wie z.B. Nachformbarkeit oder vorgegebenem Brandverhalten sind darin auch enthalten.

Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables - Partie 1: Spécifications (ISO 4586-1:1987, modifiée)

Cette Norme établit une classification pour les plaques de stratifié décoratif haute pression en fonction de leurs performances et de leur principiaux domaines d'application préconisés, et donne également des spécifications pour des matériaux ayant des caractéristiques particulieres, par example aptitude au postformage ou réaction au feu définie.

Dekorativni visokotlačni laminati (HPL) - Plošče na osnovi duromernih smol - 1. del: Specifikacije (ISO 4586-1:1987, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2000
• Withdrawal Date: 30-Nov-2005
• ICS: 83.140.20 - Laminated sheets
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Dec-2005
• Due Date: 01-Dec-2005
• Completion Date: 01-Dec-2005
• Ref Project: EN 438-1:1991 - Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specifications (ISO 4586-1:1987, modified)

Relations

• Replaced By: SIST EN 438-1:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
• Effective Date: 01-Dec-2005
• Replaced By: SIST EN 438-3:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN 438-4:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater.
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN 438-6:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN 438-5:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN 438-7:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze - Teil 1: Spezifikation (ISO 4586-1:1987, modifiziert)Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables - Partie 1: Spécifications (ISO 4586-1:1987, modifiée)Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specif
...