iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1870-9:2000

(Main)

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

This EN specifies the requirements and/or measures to remove the hazards and limit the risks on double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading, hereinafter referred to as 'machines', designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminate. This EN does not apply to: - machines for cross cutting logs; - double blade up-cutting cross-cut sawing machines. This EN covers the hazards relevant to these machines as stated in 4.

Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 9: Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder Handentnahme

Diese Europäische Norm nennt die Anforderungen und/oder Maßnahmen für die Beseitigung von Gefährdungen und zur Begrenzung der Risiken an wie in 3 definierten Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder Handentnahme - im folgenden als "Maschinen" bezeichnet -, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten oder Sperrholz, sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten versehen und/oder kunststoff/aluminium-beschichtet sind.

Sécurité des machines pour le travail du bois - Machines a scier circulaires - Partie 9: Machines a scier a deux lames de scie circulaires, pour tronçonnage, a avance mécanisée et a chargement et/ou déchargement manuels

La présente norme européenne spécifie les prescriptions et/ou les mesures qui doivent etre prises pour éliminer les phénomenes dangereux et limiter les risques sur les machines a scier a deux lames de scie circulaires, pour tronçonnage, a avance mécanisée et a chargement et/ou déchargement manuels, ci-apres désignées "machines", conçues pour la coupe de bois massif, des panneaux de particules et de fibres, du contre-plaqué, ainsi que ces matériaux lorsque leurs surface ou leurs chants sont recouverts de matiere plastique et/ou de plastique/alliage léger stratéfié.

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

General Information

Status
Withdrawn
Publication Date
30-Nov-2000
Withdrawal Date
14-Sep-2009
ICS
25.080.60 - Sawing machines
79.120.10 - Woodworking machines
Technical Committee
VSN - Safety of machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Sep-2009
Due Date
07-Oct-2009
Completion Date
15-Sep-2009
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 1870-9:2000 - Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

Relations

Consolidated By
SIST EN 1870-9:2000+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
Effective Date
18-Jan-2023
Consolidated By
SIST EN 1870-9:2000+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
Effective Date
19-Jan-2023
Amended By
SIST EN 1870-9:2000/kprA1:2009 - Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
Effective Date
01-May-2009
Replaced By
SIST EN 1870-9:2000+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
Effective Date
01-Nov-2009
Parent
SIST EN 1870-3:2002 - Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
Effective Date
22-Dec-2008

Buy Standard

EN 1870-9:2000EN 1870-9:2000
PreviousNext
Standard
EN 1870-9:2000
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloadingSicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 9: Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder HandentnahmeSécurité des machines pour le travail du bois - Machines a scier circulaires - Partie 9: Machines a scier a deux lames de scie circulaires, pour tronçonnage, a avance mécanisée et a chargement et/ou déchargement manuelsSafety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slov
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19085-16:2022(Main)
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021)
EN ISO 19085-16:2021

This document gives the safety requirements and measures for stationary and displaceable table band saws and band resaws with manual loading and/or unloading, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as “machines”.
NOTE 1   For the definition of displaceable machine, see ISO 19085-1:2017, 3.5.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 2   For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a)   device to tilt the table;
b)   device to tilt the saw unit.
This document does not apply to:
1)   machines driven by combustion engines or power take offs (PTO);
2)   log band sawing machines;
NOTE 3   Log band sawing machines are covered by EN 1807-2.
3)   machines designed for cross-cutting round or irregular shaped work-pieces;
4)   transportable / displaceable machines with a maximum length of the band saw blade of ≤ 2700 mm and a maximum diameter of the powered wheel of ≤ 350 mm;
NOTE 4    Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2015.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-2:2022(Main)
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
EN ISO 19085-2:2021

This document gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually and/or powered loaded and manually unloaded, capable of continuous production use, as defined in 3.1 and hereinafter referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
—    side pressure device;
—    device for powered unloading;
—    unit for scoring;
—    unit for post-formed/soft-formed edge pre-cutting;
—    panel turning device;
—    front side turn table;
—    pushing out device;
—    pneumatic clamping of the saw blade;
—    powered panel loading device;
—    device for grooving by milling tool;
—    one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line);
—    workpiece vacuum clamping as part of a front side turn table or of a panel loading device;
—    panel pusher;
—    independent panel pushers;
—    additional panel pushers mounted on the panel pusher carriage;
—    additional panel pusher with integrated label printer device;
—    lifting platform;
—    device for automatic loading of thin panels;
—    device for base board unloading by gravity;
—    device for base board powered unloading;
—    device for panel unloading in limited space condition;
—    loading or pre-loading roller conveyors;
—    pressure beam with additional flaps to increase dust extraction efficiency;
—    saw blade cooling system by air or water-air or oil-air;
—    vibrating conveyor with/without trimming unit for offcuts management;
—    predisposition for top loading/unloading by an external system directly on the machine table and/or on the machine preloading roller conveyor and/or on the machine lifting table.
NOTE      base board is a support panel underlying the panel stack, to protect the panels from damages during transportation.
The machines are designed for cutting panels consisting of:
a) solid wood;
b) material with similar physical characteristics to wood (see ISO19085‑1:2021, 2);
c) gypsum boards, gypsum bounded fibreboards;
d) composite materials, with core consisting of e.g. polyurethane or mineral material, laminated with light alloy;
e) cardboard;
f) foam board;
g) matrix engineered mineral boards, silicate boards;
h) polymer‐matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials;
i) aluminium light alloy plates with a maximum thickness of 10 mm;
j) composite boards made from the materials listed above.
This document does not deal with hazards related to:
—    specific features different from those listed above;
—    the machining of panels with milling tools for grooving;
—    powered unloading of panels;
—    rear half of split pressure beam on the front cutting line;
—    the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
—    machines intended for use in potentiall

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-10:2019/A11:2021(Amendment)
Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, including Corrected version 2019-12)
EN ISO 19085-10:2019/A11:2020

2020-07-20 JF: Through the decision C132/2020 taken on 2020-07-08, the CEN Technical Board approved the revised Annex ZA and therefore, the European Amendment, of EN ISO 19085-10:2019. European amendment is under publication.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-13:2020(Main)
Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)
EN ISO 19085-13:2020

This international standard deals with all significant hazards, hazardous situations and events relevant to stationary multi-blade rip sawing machines, hereinafter referred to as “machines”, designed to cut solid wood and material with similar physical characteristics as wood, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.
This international standard does not apply to machines with vertical roller feed or vertical chain conveyor feed or machines designed to make the first rip cut on a log.
This international standard does not deal with specific hazards related to the combination of single machines with any other machine as part of a line.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-9:2020(Main)
Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019)
EN ISO 19085-9:2020

This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), also known as “table saws” (in the USA), hereinafter referred to as “machines”, designed to cut wood and material with similar physical characteristics to wood, when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-10:2019(Main)
Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, Corrected version 2019-12)
EN ISO 19085-10:2019

This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to displaceable building site saws, hereinafter referred to as “machines”, designed to cut solid wood and material with similar characteristics to wood (see ISO 19085-1:2016), when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-4:2018(Main)
Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018)
EN ISO 19085-4:2018

This international standard deals with all significant hazards, hazardous situations and events as listed in
Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing machines (with or without
integrated feed) hereinafter referred to as "machines" when they are operated, adjusted and maintained as
intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.
Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1870-6:2018(Main)
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 1870-6:2017

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to firewood and dual-purpose circular sawing machines for firewood/circular saw benches,with manual loading and/or unloading, hereinafter referred to as machines, designed to cut solid wood." On Combined circular sawing machines for firewood - Log splitting machines only the circular sawing machine for firewood is covered by this European Standard. For the requirements for the log splitting part of this machine see EN 609-1: 1999 and EN 609-2: 1999.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    61 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-5:2017(Main)
Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)
EN ISO 19085-5:2017

This international standard deals with all significant hazards, hazardous situations and events as listed in
Clause 4 which are relevant to stationary and displaceable dimensions saws, hereinafter referred to as
machines‖, designed to cut wood and material with similar physical characteristics to wood, when they are
operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer
including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping
phases are taken into account.
The machines may also be fitted with one or more of the following devices/facilities, whose hazards have
been dealt with:
a) facility for the main saw blade and scoring saw blade (if any) to be raised and lowered;
b) facility to tilt the main saw blade and scoring saw blade (if any) for angled cutting;
c) facility for scoring;
d) facility for grooving with milling tool with a width not exceeding 20 mm in one pass;
e) demountable power feed unit;
f) post-formed edge pre-cutting unit;
g) power operated sliding table;
h) workpiece clamping.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1870-17:2012+A1:2015(Main)
Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-17:2012+A1:2015

This European Standard specifies all significant hazards, hazardous situation and events as listed in Clause 4, relevant to stationary and displaceable manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws), hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials if they are covered with plastic edging and/or plastic laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.
NOTE 1   For the definition of stationary and displaceable machine, see 3.2.3 and 3.2.4.
The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic.
This document does not apply to:
a)   machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down;
NOTE 2   Transportable motor-operated electrical tools are dealt with in EN 61029-1:2009 together with
IEC 61029-2-2:1993.
b)   machines fitted with hydraulically powered machine actuators;
c)   machines fitted with powered work-piece positioning;
d)   machines fitted with the facility for either ripping, milling (including trenching and grooving), sanding and/or drilling;
e)   machines equipped with more than one saw spindle speed;
NOTE 3   A standard to cover machines that can be used for ripping and moulding will be considered at the next revision.
NOTE 4   Semi-automatic and automatic horizontal cutting cross-cut circular sawing machines with one saw unit (radial arm saws) are dealt with in EN 1870-11:2003+A1:2009.
f)   machines with integrated feed.
This document is not applicable to manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws) which are manufactured before the date of its publication as EN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day