SIST EN ISO/ASTM 52926-1:2024
(Main)Additive Manufacturing of metals - Qualification principles - Part 1: General qualification of operators (ISO/ASTM 52926-1:2023)
Additive Manufacturing of metals - Qualification principles - Part 1: General qualification of operators (ISO/ASTM 52926-1:2023)
This document specifies the activities and responsibilities of the AM operators in the field of the
additive manufacturing (AM) technologies dealing with metallic parts production.
This document is intended to provide guidance for qualification of AM machine operators in general
industrial applications. Where industry-specific requirements exist for the qualification of AM
operators, such as ISO/ASTM 52942 for aerospace applications, those industry-specific standards are
used instead of this document.
Additive Fertigung von Metallen - Grundsätze der Qualifizierung - Teil 1: Grundlegende Qualifizierung von Maschinenbedienern (ISO/ASTM 52926-1:2023)
Dieses Dokument legt die Tätigkeiten und Zuständigkeiten der AM-Bediener im Bereich additiver Fertigungstechnologien (en: additive manufacturing, AM) fest, die sich mit der Herstellung von Metallteilen befassen.
Dieses Dokument ist als Leitfaden für die Qualifizierung von AM-Maschinenbedienern in allgemeinen industriellen Anwendungen konzipiert. Gibt es branchenspezifische Anforderungen für die Qualifikation von AM-Bedienern, wie z. B. ISO/ASTM 52942 für Anwendungen in der Luft- und Raumfahrt, so sind diese branchenspezifischen Normen anstelle dieses Dokuments anzuwenden.
Fabrication additive de métaux - Principes de qualification - Partie 1: Qualification générale des opérateurs (ISO/ASTM 52926-1:2023)
Le présent document spécifie les activités et les responsabilités des opérateurs de FA dans le domaine des technologies de fabrication additive (FA) traitant de la production de pièces métalliques.
Le présent document est destiné à fournir des conseils pour la qualification des opérateurs de machines de FA dans les applications industrielles générales. Lorsque des exigences spécifiques de l'industrie existent pour la qualification des opérateurs, telles que l'ISO/ASTM 52942 pour les applications aérospatiales, ces normes spécifiques de l'industrie sont utilisées au lieu du présent document.
Aditivna proizvodnja kovinskih izdelkov - Kvalifikacija - 1. del: Splošna kvalifikacija operaterjev (ISO/ASTM 52926-1:2023)
Ta dokument določa aktivnosti in odgovornosti operaterjev aditivne proizvodnje na področju tehnologij aditivne proizvodnje kovinskih delov.
Namen tega dokumenta je zagotoviti navodila za kvalifikacijo operaterjev strojev za aditivno proizvodnjo v splošni industrijski uporabi. Če obstajajo posebne industrijske zahteve za kvalifikacijo operaterjev za aditivno proizvodnjo, kot je standard ISO/ASTM 52942 za uporabo v aeronavtiki, se ti posebni industrijski standardi uporabljajo namesto tega dokumenta.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/ASTM 52926-1:2024
01-marec-2024
Aditivna proizvodnja kovinskih izdelkov - Kvalifikacija - 1. del: Splošna
kvalifikacija operaterjev (ISO/ASTM 52926-1:2023)
Additive Manufacturing of metals - Qualification principles - Part 1: General qualification
of operators (ISO/ASTM 52926-1:2023)
Additive Fertigung von Metallen - Grundsätze der Qualifizierung - Teil 1: Grundlegende
Qualifizierung von Maschinenbedienern (ISO/ASTM 52926-1:2023)
Fabrication additive de métaux - Principes de qualification - Partie 1: Qualification
générale des opérateurs (ISO/ASTM 52926-1:2023)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52926-1:2023
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO/ASTM 52926-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/ASTM 52926-1:2024
---------------------- Page: 2 ----------------------
SIST EN ISO/ASTM 52926-1:2024
EN ISO/ASTM 52926-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 03.100.30; 25.030
English Version
Additive Manufacturing of metals - Qualification principles
- Part 1: General qualification of operators (ISO/ASTM
52926-1:2023)
Fabrication additive de métaux - Principes de Additive Fertigung von Metallen - Grundsätze der
qualification - Partie 1: Qualification générale des Qualifizierung - Teil 1: Grundlegende Qualifizierung
opérateurs (ISO/ASTM 52926-1:2023) von Maschinenbedienern (ISO/ASTM 52926-1:2023)
This European Standard was approved by CEN on 7 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52926-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/ASTM 52926-1:2024
EN ISO/ASTM 52926-1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/ASTM 52926-1:2024
EN ISO/ASTM 52926-1:2023 (E)
European foreword
This document (EN ISO/ASTM 52926-1:2023) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorseme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.