SIST EN ISO/ASTM 52935:2024
(Main)Additive manufacturing of metals - Qualification principles - Qualification of coordination personnel (ISO/ASTM 52935:2023)
Additive manufacturing of metals - Qualification principles - Qualification of coordination personnel (ISO/ASTM 52935:2023)
This document specifies qualification requirements for coordination personnel in industrial
manufacturing sites responsible for additive manufacturing of metal parts.
This document is applicable to all metallic processes that are described by ISO 17296-2. In this context,
the skills, tasks and responsibilities for different levels of AM coordination personnel are typically
adapted according to the applicable regulations, depending on the process.
This document is intended to provide guidance and requirements for the qualification of coordination
personnel in general-industrial applications. Additional requirements are typically needed for specific
industries or applications (e.g. aerospace, medical) or to meet regulatory requirements.
Additive Fertigung von Metallen - Grundsätze der Qualifizierung - Qualifizierung des Aufsichtspersonals in der additiven Fertigung (ISO/ASTM 52935:2023)
Dieses Dokument legt die Qualifizierungsanforderungen für Koordinationspersonal an industriellen Fertigungsstandorten fest, die für die additive Fertigung von Metallteilen verantwortlich sind.
Dieses Dokument ist auf alle in ISO 17296 2 beschriebenen Metallverarbeitungsprozesse anwendbar. In diesem Kontext werden die Fähigkeiten, Aufgaben und Verantwortlichkeiten für AM-Koordinationspersonal verschiedener Stufen typischerweise prozessabhängig an die geltenden Vorschriften angepasst.
Dieses Dokument stellt einen Leitfaden und Anforderungen für die Qualifizierung von Koordinationspersonal in allgemeinen industriellen Anwendungen bereit. Für bestimmte Branchen oder Anwendungen (z. B. Luft- und Raumfahrt, Medizin) oder zur Erfüllung bestimmter regulatorischer Anforderungen bestehen typischerweise Zusatzanforderungen.
Fabrication additive des métaux - Principes de qualification - Qualification du personnel de coordination (ISO/ASTM 52935:2023)
Le présent document spécifie les exigences de qualification du personnel de coordination sur les sites de fabrication industrielle responsable de la fabrication additive de pièces métalliques.
Le présent document est applicable à tous les procédés métalliques qui sont décrits par l’ISO 17296‑2. Dans ce contexte, les compétences, les tâches et les responsabilités afférentes à différents niveaux de personnel de coordination de la FA sont habituellement adaptées aux réglementations applicables, selon le procédé.
Le présent document est destiné à fournir des indications et des exigences pour la qualification du personnel de coordination dans les applications industrielles générales. Des exigences supplémentaires sont habituellement nécessaires pour des industries ou des applications spécifiques (par exemple, aéronautique, médical) ou pour satisfaire aux exigences réglementaires.
Aditivna proizvodnja kovinskih izdelkov - Kvalifikacija - Kvalifikacija osebja za koordinacijo aditivne proizvodnje (ISO/ASTM 52935:2023)
Ta dokument določa zahteve za kvalifikacijo osebja za koordinacijo aditivne proizvodnje kovinskih delov v industrijskih proizvodnih obratih.
Ta dokument se uporablja za vse obdelave kovin, ki so opisane v standardu ISO 17296-2. V tem okviru so spretnosti, naloge in odgovornosti za različne stopnje osebja za koordinacijo aditivne proizvodnje običajno prilagojeni glede na veljavne predpise odvisno od postopka.
Namen tega dokumenta je zagotoviti navodila in zahteve za kvalifikacijo osebja za koordinacijo v splošni industrijski uporabi. Za posebne industrije ali vrste uporabe (npr. aeronavtika, medicina) ali za izpolnjevanje zakonodajnih zahtev so običajno potrebne dodatne zahteve.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/ASTM 52935:2024
01-marec-2024
Aditivna proizvodnja kovinskih izdelkov - Kvalifikacija - Kvalifikacija osebja za
koordinacijo aditivne proizvodnje (ISO/ASTM 52935:2023)
Additive manufacturing of metals - Qualification principles - Qualification of coordination
personnel (ISO/ASTM 52935:2023)
Additive Fertigung von Metallen - Grundsätze der Qualifizierung - Qualifizierung des
Aufsichtspersonals in der additiven Fertigung (ISO/ASTM 52935:2023)
Fabrication additive des métaux - Principes de qualification - Qualification du personnel
de coordination (ISO/ASTM 52935:2023)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52935:2023
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO/ASTM 52935:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/ASTM 52935:2024
---------------------- Page: 2 ----------------------
SIST EN ISO/ASTM 52935:2024
EN ISO/ASTM 52935
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 25.030
English Version
Additive manufacturing of metals - Qualification principles
- Qualification of coordination personnel (ISO/ASTM
52935:2023)
Fabrication additive des métaux - Principes de Additive Fertigung von Metallen - Grundsätze der
qualification - Qualification du personnel de Qualifizierung - Qualifizierung des AM-
coordination (ISO/ASTM 52935:2023) Koordinationspersonals (ISO/ASTM 52935:2023)
This European Standard was approved by CEN on 6 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52935:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/ASTM 52935:2024
EN ISO/ASTM 52935:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/ASTM 52935:2024
EN ISO/ASTM 52935:2023 (E)
European foreword
This document (EN ISO/ASTM 52935:2023) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/ASTM 52935:2023 has been app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.