SIST EN ISO 7291:2012/A1:2015
(Amendment)Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
2013-05-28 LVO: Draft for // ENQ received in ISO/CS (see notification of 2013-05-27 in dataservice).
Gasschweißgeräte - Hauptstellendruckregler für Schweißen, Schneiden und verwandte Prozesse bis 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Matériel de soudage aux gaz - Détendeurs de centrale de bouteilles pour le soudage, le coupage et les techniques connexes jusqu'à 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Oprema za plamensko varjenje - Glavni regulatorji tlaka plina za varjenje, rezanje in sorodne postopke za tlake do 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7291:2012/A1:2015
01-julij-2015
Oprema za plamensko varjenje - Glavni regulatorji tlaka plina za varjenje, rezanje
in sorodne postopke za tlake do 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Gas welding equipment - Pressure regulators for manifold systems used in welding,
cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Gasschweißgeräte - Hauptstellendruckregler für Schweißen, Schneiden und verwandte
Prozesse bis 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Matériel de soudage aux gaz - Détendeurs de centrale de bouteilles pour le soudage, le
coupage et les techniques connexes jusqu'à 30 MPa (300 bar) (ISO 7291:2010/AMD
1:2015)
Ta slovenski standard je istoveten z: EN ISO 7291:2010/A1:2015
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 7291:2012/A1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7291:2012/A1:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 7291:2012/A1:2015
EUROPEAN STANDARD
EN ISO 7291:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2015
ICS 25.160.30
English Version
Gas welding equipment - Pressure regulators for manifold
systems used in welding, cutting and allied processes up to 30
MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
Matériel de soudage aux gaz - Détendeurs de centrale de Gasschweißgeräte - Hauptstellendruckregler für
bouteilles pour le soudage, le coupage et les techniques Schweißen, Schneiden und verwandte Prozesse bis 30
connexes jusqu'à 30 MPa (300 bar) (ISO 7291:2010/AMD MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
1:2015)
This amendment A1 modifies the European Standard EN ISO 7291:2010; it was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7291:2010/A1:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7291:2012/A1:2015
EN ISO 7291:2010/A1:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7291:2012/A1:2015
EN ISO 7291:2010/A1:2015 (E)
Foreword
This document (EN ISO 7291:2010/A1:2015) has been prepared by Technical Committee ISO/TC 44
“Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 7291:2010 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and
conflicting national standards shall be withdrawn at the latest by October 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
...
SLOVENSKI STANDARD
SIST EN ISO 7291:2012/oprA1:2013
01-december-2013
Oprema za plamensko varjenje - Glavni regulatorji tlaka plina za varjenje, rezanje
in sorodne postopke za tlake do 30 MPa (300 bar) (ISO 7291:2010/DAM 1:2013)
Gas welding equipment - Pressure regulators for manifold systems used in welding,
cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/DAM 1:2013)
Gasschweißgeräte - Hauptstellendruckregler für Schweißen, Schneiden und verwandte
Prozesse bis 30 MPa (300 bar)
Matériel de soudage aux gaz - Détendeurs de centrale de bouteilles pour le soudage, le
coupage et les techniques connexes jusqu'à 30 MPa (300 bar) (ISO 7291:2010/DAM
1:2013)
Ta slovenski standard je istoveten z: EN ISO 7291:2010/prA1
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 7291:2012/oprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7291:2012/oprA1:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 7291:2012/oprA1:2013
DRAFT AMENDMENT ISO 7291:2010/DAM 1
ISO/TC 44/SC 8 Secretariat: DIN
Voting begins on Voting terminates on
2013-08-08 2014-01-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Gas welding equipment — Pressure regulators for manifold
systems used in welding, cutting and allied processes up to
30 MPa (300 bar)
AMENDMENT 1
Matériel de soudage aux gaz — Détendeurs de centrale de bouteilles pour le soudage, le coupage et les
techniques connexes jusqu'à 30 MPa (300 bar)
AMENDEMENT 1
ICS 25.160.30
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
© International Organization for Standardization, 2013
---------------------- Page: 3 ----------------------
SIST EN ISO 7291:2012/oprA1:2013
ISO 7291:2010/DAM 1
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.