SIST-TS CEN/TS 15427-1-3:2023

Railway applications - Wheel/rail friction management - Part 1-3: Equipment and application - Adhesion materials

This document is limited to specifying the requirements when applying adhesion material to the interface between the wheel tread and the crown of the rail and includes both trainborne and trackside solutions.
This document only covers the equipment and application of adhesion material to the active interface.
This document defines:
-   the characteristics that systems for the application of adhesion materials of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
-   all relevant terminology which is specific to the adhesion materials of the wheel-rail interface.
This document applies to the mainline railway.
NOTE 1   This document can also be used for other railways, e.g. urban rail.
NOTE 2   Where technologies are used to influence the wheel/rail interface, other than the application of an adhesion material, this document is out of scope but can be used as guidance.

Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 1-3: Vorrichtungen und Anwendung - Kraftschlusserhöhende Materialien

Dieses Dokument beschränkt sich darauf, die Anforderungen bei der Anwendung von kraftschlusserhöhenden Materialien auf die Kontaktfläche zwischen Radlauffläche und Fahrfläche der Schiene festzulegen, und umfasst sowohl fahrzeugseitige als auch gleisseitige Lösungen.
Dieses Dokument deckt nur die Vorrichtungen und Anwendung von kraftschlusserhöhenden Materialien auf die aktive Kontaktfläche ab.
Dieses Dokument definiert
   die Eigenschaften, die Systeme bei der Applikation von kraftschlusserhöhenden Materialien an der Kontaktfläche zwischen Rad und Schiene erfüllen müssen, zusammen mit geeigneten Inspektions- und Prüfverfahren, die zur Verifikation durchzuführen sind,
   alle relevanten Begriffe, die spezifisch für kraftschlusserhöhenden Materialien für die Kontaktfläche zwischen Rad und Schiene sind.
Dieses Dokument ist für Vollbahnen anzuwenden.
ANMERKUNG 1   Dieses Dokument kann auch für andere Schienennetze verwendet werden, z. B. städtische Schienenbahnen.
ANMERKUNG 2   Wo andere Technologien als die Anwendung eines kraftschlusserhöhenden Materials zur Beeinflussung der Kontaktfläche zwischen Rad und Schiene verwendet werden, liegen diese nicht im Anwendungsbereich dieses Dokuments, es kann jedoch als Leitlinie verwendet werden.

Applications ferroviaries - Gestion du frottement roue/rail - Partie 1-3 : Équipement et application - Matériau d'adhésion

Železniške naprave - Trenje na stiku kolo-tirnica - 1-3. del: Oprema in uporaba - Lepilni materiali

Ta dokument je omejen na določanje zahtev pri nanašanju lepilnih materialov na vmesnik med kolesnim obročem in zgornjim robom tirnice ter vključuje opremo tako na vlaku kot ob progi.
Dokument zajema le opremo in uporabo lepilnega materiala na aktivnem vmesniku.
Ta dokument določa:
– značilnosti, ki jih morajo doseči sistemi za nanašanje lepilnih materialov vmesnika med kolesom in tirnico, ter ustrezne metode za pregled in preskušanje, ki jih je treba izvesti za preverjanje;
– vso ustrezno terminologijo v zvezi z lepilnimi materiali vmesnika med kolesom in tirnico.
Ta dokument se uporablja za glavne železniške proge.
OPOMBA 1: Ta dokument je mogoče uporabiti tudi za druge železniške proge (npr. mestna železnica).
OPOMBA 2:   Ta dokument ne zajema uporabe tehnologij, ki vplivajo na vmesnik med kolesom in tirnico (razen nanosa lepilnega materiala), vendar ga je mogoče uporabiti kot vodilo.

General Information

• Status: Published
• Publication Date: 23-Oct-2023
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Oct-2023
• Due Date: 24-Dec-2023
• Completion Date: 24-Oct-2023
• Directive: 2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: CEN/TS 15427-1-3:2023 - Railway applications - Wheel/rail friction management - Part 1-3: Equipment and application - Adhesion materials

Relations

• Replaces: SIST-TS CEN/TS 15427-1-3:2021 - Railway applications - Wheel/Rail friction management - Part 1-3: Equipment and Application - Adhesion materials
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15427-1-3:2023
01-december-2023
Nadomešča:
SIST-TS CEN/TS 15427-1-3:2021
Železniške naprave - Trenje na stiku kolo-tirnica - 1-3. del: Oprema in uporaba -
Lepilni materiali
Railway applications - Wheel/rail friction management - Part 1-3: Equipment and
application - Adhesion materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 1-3:
Vorrichtungen und Anwendung - Kraftschlusserhöhende Materialien
Applications ferroviaries - Gestion du frottement roue/rail - Partie 1-3 : Équipement et
application - Matériau d'adhésion
Ta slovenski standard je istoveten z: CEN/TS 15427-1-3:2023
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST-TS CEN/TS 15427-1-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-1-3:2023

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-1-3:2023


CEN/TS 15427-1-3
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

October 2023
TECHNISCHE SPEZIFIKATION
ICS 45.040 Supersedes CEN/TS 15427-1-3:2021
English Version

Railway applications - Wheel/Rail Friction Management -
Part 1-3: Equipment and Application - Adhesion Materials
Applications ferroviaries - Gestion du frottement Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Partie 1-3 : Équipement et application - Rad und Schiene - Teil 1-3: Vorrichtungen und
Matériau d'adhésion Anwendung - Kraftschlusserhöhende Materialien
This Technical Specification (CEN/TS) was approved by CEN on 30 August 2023 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-1-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-1-3:2023
CEN/TS 15427-1-3:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General . 8
4.1 Purpose . 8
4.2 Application . 9
5 Requirements for trainborne equipment . 9
5.1 General . 9
5.2 Design of trainborne equipment .
...