SIST EN ISO 22523:2007
(Main)External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006)
External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006)
This International Standard specifies requirements and test methods for external limb prostheses and external
orthoses, including the following classifications from ISO 9999:
06 03 - 06 15 Orthoses
06 18 - 06 27 Limb prostheses
It covers strength, materials, restrictions on use, risk and the provision of information associated with the
normal conditions of use of both components and assemblies of components.
This International Standard does not cover special seating as it is not classified as an orthosis in ISO 9999
and it is not normally body worn.
NOTE 1 It is intended to cover orthopaedic footwear (classification 06 33) in the future.
NOTE 2 The application of Quality Systems as described or referred to in ISO 13485 and ISO 13488 may be
appropriate.
Externe Gliedmaßenprothesen und externe Orthesen - Anforderungen und Prüfverfahren (ISO 22523:2006)
Diese Internationale Norm legt Anforderungen an und Prüfverfahren für externe Gliedmaßenprothesen und externe Orthesen fest, einschließlich der folgenden Klassifikationen nach EN ISO 9999:
06 03 06 15 Orthesen
06 18 06 27 Gliedmaßenprothesen
Diese Europäische Norm befasst sich mit Festigkeit, Werkstoffen, Einschränkungen im Gebrauch, Risiken und der Bereitstellung von Informationen über den normalen Gebrauch von Einzelbauteilen und Baugruppen.
Diese Internationale Norm befasst sich nicht mit speziellen Sitzschalen, da diese nach ISO 9999 nicht als Orthese klassifiziert sind und normalerweise nicht am Körper getragen werden.
ANMERKUNG 1 Es ist beabsichtigt, zukünftig orthopädisches Schuhwerk (Klassifikation 06 33) einzubeziehen.
ANMERKUNG 2 Die Anwendung von Qualitätssicherungssystemen, wie in ISO 13485 und ISO 13488 beschrieben oder angeführt, kann geeignet sein.
Protheses de membre externes et ortheses externes - Exigences et méthodes d'essai (ISO 22523:2006)
L'ISO 22523:2006 spécifie les exigences et les méthodes d'essai applicables aux prothèses de membre externes et orthèses externes, y compris les classifications suivantes de l'ISO 9999:
06 03 - 06 15 Orthèses06 18 - 06 27 Prothèses de membre
Elle couvre la résistance, les matériaux utilisés, les restrictions d'utilisation, les risques et les informations associés aux conditions normales d'utilisation des composants et des ensembles de composants.
La présente Norme internationale ne traite pas des «corsets-sièges» car ils ne sont pas classés comme orthèses dans l'ISO 9999 et ne sont pas normalement portés sur le corps.
Proteze zunanjih okončin in zunanje ortoze - Zahteve in preskusne metode (ISO 22523:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22523:2007
01-marec-2007
1DGRPHãþD
SIST EN 12523:2000
3URWH]H]XQDQMLKRNRQþLQLQ]XQDQMHRUWR]H=DKWHYHLQSUHVNXVQHPHWRGH ,62
External limb prostheses and external orthoses - Requirements and test methods (ISO
22523:2006)
Externe Gliedmaßenprothesen und externe Orthesen - Anforderungen und Prüfverfahren
(ISO 22523:2006)
Protheses de membre externes et ortheses externes - Exigences et méthodes d'essai
(ISO 22523:2006)
Ta slovenski standard je istoveten z: EN ISO 22523:2006
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
11.180.10 3ULSRPRþNLLQSULODJRGLWYH]D Aids and adaptation for
JLEDQMH moving
SIST EN ISO 22523:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 22523
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2006
ICS 11.040.40
English Version
External limb prostheses and external orthoses - Requirements
and test methods (ISO 22523:2006)
Prothèses de membre externes et orthèses externes - Externe Gliedmaßenprothesen und externe Orthesen -
Exigences et méthodes d'essai (ISO 22523:2006) Anforderungen und Prüfverfahren (ISO 22523:2006)
This European Standard was approved by CEN on 13 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22523:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 22523:2006 (E)
Foreword
This document (EN ISO 22523:2006) has been prepared by Technical Committee ISO/TC 168
"Prosthetics and orthotics" in collaboration with Technical Committee CEN/TC 293 "Assistive
products for persons with disability", the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall
be withdrawn at the latest by April 2007.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 22523:2006 has been approved by CEN as EN ISO 22523:2006 without any
modifications.
2
---------------------- Page: 3 ----------------------
EN ISO 22523:2006 (E)
ANNEX ZA
(informative)
Clauses of this European Standard addressing essential requirements
or other provisions of EU Directives.
This European Standard has been prepared under a mandate given to the European Community
and the European Free Trade Association and supports corresponding essential requirements of
EU Directive 93/42/EEC concerning medical devices and EU Directive 99/5/EC on radio equipment
and telecommunications terminal equipment.
WARNING — Other requirements and other EU Directives may be applicable to the
product(s) falling within the scope of this standard.
The clauses of this standard are likely to support requirements of Directive 93/42 EEC concerning
medical devices (see Table ZA.1) and of Dire
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.