iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 241:2000

(Main)

Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method

Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method

This European Standard specifies a method for the determination of the sodium content of crude oils, liquid petroleum products, heating oils, residual oils and mineral oil distillates by means of atomic absorption spectrometry after incineration of the products. NOTE: For the purpose of this European Standard, the term "% (m/m)" is used to represent the mass fraction.

Flüssige Mineralölerzeugnisse - Bestimmung des Natriumgehaltes - Atomabsorptionsspektrometrie

Produits pétroliers liquides - Détermination de la teneur en sodium - Méthode par spectrométrie d'absorption atomique

La présente norme européenne prescrit une méthode de détermination de la teneur en sodium dans les pétroles bruts, les produits pétroliers liquides, les fuels de chauffage, les fuels résiduels et les distillats pétroliers, par spectrométrie d'absorption atomique après que les produits aient été brûlés. NOTE: Pour les besoins de la présente Norme européenne, l'expression "% (m/m)" est utilisée pour désigner les fractions massiques.

Tekoči naftni proizvodi - Določevanje natrija - Atomska absorpcijska spektrometrijska metoda

General Information

Status
Published
Publication Date
30-Jun-2000
ICS
75.160.20 - Liquid fuels
Technical Committee
NAD - Petroleum products, lubricants and related products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2000
Due Date
01-Jul-2000
Completion Date
01-Jul-2000
Ref Project
EN 241:2000 - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method

Buy Standard

EN 241:2000EN 241:2000
PreviousNext
Standard
EN 241:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNDFlüssige Mineralölerzeugnisse - Bestimmung des Natriumgehaltes - AtomabsorptionsspektrometrieProduits pétroliers liquides - Détermination de la teneur en sodium - Méthode par spectrométrie d'absorption atomiqueLiquid petroleum products - Determination of sodium conten
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15491:2025(Main)
Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
EN 15491:2025

This document specifies a method for determining the total acidity, calculated as acetic acid, of ethanol to be used in petrol blends. It is applicable to ethanol having total acid contents of between 0,003 % (m/m) and 0,015 % (m/m).
NOTE   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction and the volume fraction, respectively.
WARNING - Use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the document, and to fulfil statutory and regulatory restrictions for this purpose.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22854:2025(Main)
Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2025)
EN ISO 22854:2025

This document specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline, small engine petrol and ethanol (E85) automotive fuel. Additionally, the benzene and toluene content, oxygenated compounds and the total oxygen content can be determined.
Although specifically developed for the analysis of automotive motor gasoline that contains oxygenates, this test method can also be applied to other hydrocarbon streams having similar boiling ranges, such as naphthas and reformates.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14538:2025(Main)
Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 14538:2025

This document specifies a procedure for the direct determination of the content of the soap building elements Calcium (Ca), Magnesium (Mg), Sodium (Na) and Potassium (K) as well as Phosphorus (P) in fatty acid methyl esters (FAME) by ICP OES.
The concentrations of each component or the combinations of some to which this method is applicable are given in Table 1.
Table 1 - Scope ranges for each element
Element   Scope range
mg/kg
Ca   0,3 - 5,4
Mg   0,3 - 4,6
Na   0,4 - 5,0
K   0,6 - 5,3
P   1,0 - 5,0
Ca + Mg   0,5 - 9,4
Na + K   1,0 - 9,9
Ca + Mg + Na + K   1,4 - 19,3
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
NOTE   For the purposes of this document, the term "% (V/V)" is used to represent the volume fraction, φ, of a material.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 18051:2025(Main)
Automotive fuels - Determination of content of butoxy-benzene in middle distillates - Gas chromatographic method using a flame ionization detector (GC-FID)
EN 18051:2024

This document specifies a test method for the determination of the content of n-butyl phenyl ether (BPE, CAS: 1126-79-0, also known as butoxy-benzene) in gas oils, kerosene, diesel fuel and biodiesel blends. The method uses a two-column gas chromatograph with an FID-type of detector. The application range is 0,1 mg/l to 21,25 mg/l of BPE, with a limit of detection of 0,05 mg/l.
NOTE   This corresponds to 1 % to 150 % of the average marking level of the ACCUTRACE™ Plus required by Commission Implementing Decision (EU) 2022/197 [1] of 17 January 2022 establishing a common fiscal marker for gas oils and kerosene.
The method is found to be applicable to determinations beyond this range or for specific other chemical markers that fall within the distillation temperature range of middle-distillates, but for that no precision has been determined.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15940:2023/A101:2025
Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
  • National annex – translation
    3 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16709:2024(Main)
Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
EN 16709:2024

This document specifies requirements and test methods for marketed and delivered high FAME (B20 and B30) diesel fuel for use in diesel engine vehicles designed or subsequently adapted to run on such fuel. High FAME diesel fuel is a mixture of up to 20 % (V/V) in total and up to 30 % (V/V) in total respectively fatty acid methyl esters (commonly known as FAME) complying with EN 14214 and automotive diesel fuel complying with EN 590.
For maintenance and control reasons high FAME (B20 and B30) diesel fuel is to be used in captive fleets that are intended to have an appropriate fuel management (see Clause 4).
NOTE 1   These products are allowed in Europe [4], but national legislation can set additional requirements or rules concerning, or even prohibiting, marketing or delivering of the product.
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.
NOTE 3   In this document, A-deviations apply (see Annex A).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST 1020:2024
Liquid Petroleum Products – Determination of mark indicator Solvent Yellow 124 in Gas Oil and kerosene

Standard SIST 1020 določa preskusne metode za ugotavljanje prisotnosti in določevanje markirnega indikatorja Solvent Yellow 124 z imenom IUPAC N-etil-N-[2-(1-izobutoksietoksi)etil]-4-(fenilazo) anilin (številka CAS: 34432-92-3) v kurilnem olju EL, dizelskem gorivu in v njunih mešanicah ter v petroleju za ogrevanje v območju od 0,5 do 10,0 mg/l (metoda B) oziroma v območju 0,07 do 10 mg/l (metoda C).
Za ugotavljanje prisotnosti Solvent Yellow 124 (kvalitativno) se uporablja vizualna metoda – A. Ta metoda je primerna tudi za kontrolo na terenu.
Za določevanje Solvent Yellow 124 (kvantitativno) v kurilnem olju EL, dizelskem gorivu in mešanicah obeh goriv ter v petroleju za ogrevanje se uporabljata spektrofotometrijska metoda – B in metoda s tekočinsko kromatografijo visoke ločljivosti (HPLC) – C.
OPOZORILO: Pri preskušanju na podlagi tega standarda lahko naletimo na nevarne snovi, postopke in opremo. Morebitne nevarnosti in ustrezni varnostni ukrepi v standardu niso posebej navedeni. Uporabnik tega standarda je odgovoren, da pred preskušanjem zagotovi ustrezne varnostne ukrepe v skladu z varnostnimi predpisi in upošteva morebitne zakonodajne omejitve.

  • Standard
    10 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13032:2024(Main)
Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2024)
EN ISO 13032:2024

This document specifies an energy dispersive X-ray fluorescence (EDXRF) test method for the determination of sulfur content in automotive fuels. This document is applicable to:
—    gasoline containing up to 3,7 % oxygen by mass (including those blended with ethanol up to 10 % by volume) having sulfur contents in the range of 6,9 mg/kg to 56,7 mg/kg,
—    diesel fuels including those containing up to about 30 % fatty acid methyl ester (FAME) by volume, paraffinic diesel fuel, and neat FAME, having sulfur contents in the range of 5,0 mg/kg to 60,2 mg/kg.
The sulfur content in other products can be determined according to the test method specified in this document; however, no precision data for products other than automotive fuels and for results outside the specified range have been established for this document.
For reasons of spectral overlap, this document is not applicable to leaded automotive gasoline, gasoline having a content of greater than 8 mg/kg lead or to product and feedstock containing lead, silicon, phosphorus, calcium, potassium or halides at concentrations greater than one tenth of the concentration of sulfur measured, or more than 10 mg/kg, whichever is the greater.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16942:2024(Main)
Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
EN 16942:2024

This document lays down harmonized identifiers for marketed liquid and gaseous fuels. The requirements in this document are to complement the informational needs of users regarding the compatibility between the fuels and the vehicles that are placed on the market. The identifier is intended to be visualized at dispensers and refuelling points, on vehicles, in motor vehicle dealerships and in consumer manuals as described in this document.
Marketed fuels include for example petroleum-derived fuels, synthetic fuels, biofuels, natural gas, LPG, hydrogen and biogas and blends of the aforementioned delivered to mobile applications.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 8217:2024(Main)
Products from petroleum, synthetic and renewable sources — Fuels (class F) — Specifications of marine fuels
ISO 8217:2024

This document in its entirety defines the general requirements and specifications for fuels used in marine diesel engines and boilers, prior to onboard fuel handling (storage, settling, centrifuging, filtration, heating) before use.
For the purposes of this document, the term “fuels” comprises of the following:
— hydrocarbons from petroleum crude oil, oil sands and shale oil;
— synthetic hydrocarbons, renewable hydrocarbons or hydrocarbons from recycled sources, with molecular structures that are indistinguishable from petroleum hydrocarbons;
— fatty acid methyl ester (FAME), where permitted as specified in this document;  
— blends of any of the above, where permitted as specified in this document.
The general requirements and specifications for fuels in this document can also be applied to fuels used in stationary diesel engines of the same or similar type as those used for marine purposes.
This document specifies seven categories of distillate fuels, one of which is for diesel engines used for emergency purposes. It also specifies four categories of residual fuels for sulfur content at or below 0,50 % by mass, five categories of residual fuels containing FAME and five categories of residual fuels for sulfur content exceeding 0,50 % by mass.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off