Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff

This European Standard specifies the maximum percentage content of alloying elements and impurities present in wrought aluminium and aluminium alloys which are fabricated into materials and articles designed to be in contact with food and contains provisions for the demonstration of conformity of products with the present standard.

Aluminium und Aluminiumlegierungen - Kneterzeugnisse - Chemische Zusammensetzung von Halbzeug für die Herstellung von Erzeugnissen, die in Kontakt mit Lebensmitteln kommen

Diese Europäische Norm legt den maximalen Massenanteil an Legierungselementen und Verunreinigungen in Aluminium und Aluminium-Knetlegierungen fest, die zur Herstellung von Halbzeug und Erzeugnissen bestimmt sind, die in Kontakt mit Lebensmitteln kommen und sie enthält Festlegungen für den Nachweis der Überein-stimmung von Halbzeug und Erzeugnissen mit dieser Norm.

Aluminium et alliages d'aluminium - Produits corroyés - Composition chimique des demi-produits utilisés pour la fabrication d'articles destinés a entrer en contact avec les denrées alimentaires

La présente Norme européenne spécifie les teneurs maximales en éléments d'addition et en impuretés présents dans les aluminium et alliages d'aluminium utilisés dans la fabrication de matériels et d'articles destinés a entrer en contact avec les denrées alimentaires et contient des dispositions pour la démonstration de la conformité des produits a la présente Norme.
NOTE 1   Les lingots et le métal liquide font partie des matériaux. Les articles sont des produits finis.
NOTE 2   Certains des produits énumérés dans la présente norme peuvent faire l'objet d'un brevet ou d'une demande de brevet, mais leur énumération ci-inclus n'implique en aucune façon qu'une licence a été attribuée au regard des droits attachés a de tels brevets.
Le CEN/TC 132 affirme que, lorsque le titulaire d'un brevet refuse de délivrer une licence pour des produits normalisés dans des conditions raisonnables et non pas discriminatoires, sa politique est de retirer ce produit de la norme correspondante.

Aluminij in aluminijeve zlitine - Gneteni izdelki - Kemična sestava polizdelkov, namenjenih izdelavi izdelkov, ki pridejo v stik z živili

General Information

Status
Published
Publication Date
31-Aug-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004

RELATIONS

Buy Standard

Standard
SIST EN 602:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 602:2004
01-september-2004
1DGRPHãþD
SIST EN 602:1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH*QHWHQLL]GHONL.HPLþQDVHVWDYDSROL]GHONRY
QDPHQMHQLKL]GHODYLL]GHONRYNLSULGHMRYVWLN]åLYLOL

Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-

finished products used for the fabrication of articles for use in contact with foodstuff

Aluminium und Aluminiumlegierungen - Kneterzeugnisse - Chemische

Zusammensetzung von Halbzeug für die Herstellung von Erzeugnissen, die in Kontakt

mit Lebensmitteln kommen

Aluminium et alliages d'aluminium - Produits corroyés - Composition chimique des demi-

produits utilisés pour la fabrication d'articles destinés a entrer en contact avec les

denrées alimentaires
Ta slovenski standard je istoveten z: EN 602:2004
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 602:2004 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 602:2004
---------------------- Page: 2 ----------------------
SIST EN 602:2004
EUROPEAN STANDARD
EN 602
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2004
ICS 67.250; 77.150.10 Supersedes EN 602:1994
English version
Aluminium and aluminium alloys - Wrought products - Chemical
composition of semi-finished products used for the fabrication of
articles for use in contact with foodstuff

Aluminium et alliages d'aluminium - Produits corroyés - Aluminium und Aluminiumlegierungen - Kneterzeugnisse -

Composition chimique des demi-produits utilisés pour la Chemische Zusammensetzung von Halbzeug für die

fabrication d'articles destinés à entrer en contact avec les Herstellung von Erzeugnissen, die in Kontakt mit

denrées alimentaires Lebensmitteln kommen
This European Standard was approved by CEN on 2 February 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 602:2004: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 602:2004
EN 602:2004 (E)
Contents

Foreword......................................................................................................................................................................3

1 Scope ..............................................................................................................................................................4

2 Normative references ....................................................................................................................................4

3 Terms and definitions....................................................................................................................................4

4 Maximum permissible content of elements for foodstuff application......................................................5

4.1 Wrought aluminium .......................................................................................................................................5

4.2 Wrought aluminium alloys ............................................................................................................................5

5 Selection of wrought aluminium and wrought aluminium alloys .............................................................6

6 Demonstration of conformity with the present standard ..........................................................................6

---------------------- Page: 4 ----------------------
SIST EN 602:2004
EN 602:2004 (E)
Foreword

This document (EN 602:2004) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium

alloys”, the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an identical text or

by endorsement, at the latest by October 2004 and conflicting national standards shall be withdrawn at the latest by

October 2004.

Within its programme of work, Technical Committee CEN/TC 132 has entrusted CEN/TC 132/WG 9 "Aluminium

and aluminium alloy cast and wrought products in contact with food" to prepare a revision of the following

standard :

EN 602, Aluminium and aluminium alloys — Wrought products — Chemical composition of semi-finished products

used for the fabrication of articles for use in contact with food.
This revision consists mainly in the addition of a new clause 6.
This document supersedes EN 602:1994.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,

Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

---------------------- Page: 5 ----------------------
SIST EN 602:2004
EN 602:2004 (E)
1 Scope

This European Standard specifies the maximum percentage content of alloying elements and impurities present in

wrought aluminium and aluminium alloys which are fabricated into materials and articles designed to be in contact

with foodstuff. It contains provisions for th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.