oSIST prEN 4500-001:2025

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules

The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards for aerospace applications.
This Part 001 specifies the “General rules” framework valid for all parts.

Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 001: Allgemeine Regeln

Die Reihe EN 4500 legt die Regeln für das Erstellen und die Gestaltung von Normen für metallische Werkstoffe zur Anwendung in der Luft- und Raumfahrt fest.
Dieser Teil 001 legt die „Allgemeinen Regeln“ als Rahmen für alle weiteren Teile fest.

Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 001 : Règles générales

No Scope available

Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje standardov za materiale - 001. del: Splošna pravila

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Oct-2025
• ICS: 01.120 - Standardization. General rules
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 22-Aug-2025
• Due Date: 09-Jan-2026
• Ref Project: prEN 4500-001 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules

Relations

• Revises: SIST EN 4500-001:2024 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
• Effective Date: 11-Jun-2025

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2025
Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje
standardov za materiale - 001. del: Splošna pravila
Aerospace series - Metallic materials - Rules for drafting and presentation of material
standards - Part 001: General rules
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die
Gestaltung von Werkstoffnormen - Teil 001: Allgemeine Regeln
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation
des normes de matériaux - Partie 001 : Règles générales
Ta slovenski standard je istoveten z: prEN 4500-001
ICS:
01.120 Standardizacija. Splošna Standardization. General
pravila rules
49.025.05 Železove zlitine na splošno Ferrous alloys in general
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2025
ICS 01.120 Will supersede EN 4500-001:2024
English Version
Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 001: General
rules
Série aérospatiale - Matériaux métalliques - Règles Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
pour la rédaction et la présentation des normes de für das Erstellen und die Gestaltung von
matériaux - Partie 001 : Règles générales Werkstoffnormen - Teil 001: Allgemeine Regeln
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4500-001:2025 E
worldwide for CEN national Members.

Contents Page
Foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Rules for drafting a European standard for aerospace metallic materials. 7
4.1 Document structure . 7
4.2 Title of the material standard . 7
4.3 Introduction . 8
4.4 Scope . 8
4.5 Normative references . 8
4.6 Terms and definitions . 8
Table 1: corresponds to the template given in Annex A . 8
4.6.1 General. 8
4.6.2 Line 1: Material designation . 9
4.6.3 Line 2: Chemical composition. 9
4.6.4 Line 3: Method of melting . 10
4.6.5 Line 4.1: Form . 10
4.6.6 Line 4.2: Method of production . 10
4.6.7 Line 4.3: Further intended processing . 10
4.6.8 Line 4.4: Limit dimension(s) . 10
4.6.9 Line 5.1: Technical specification . 11
4.6.10 Line 5.2: Dimensional standard . 11
4.6.11 Line 6.1: Delivery condition and Heat treatment . 11
4.6.12 Line 6.2: Delivery condition code . 11
4.6.13 Line 7: Use condition and Heat treatment . 12
4.6.14 Line 8.1: Test sample(s) . 12
4.6.15 Line 8.2: Test piece(s) . 12
4.6.16 Line 8.3: Heat treatment . 12
4.6.17 Line 9: Dimensions concerned . 13
4.6.18 Line 10: Thickness of cladding on each face . 13
4.6.19 Line 11: Direction of test piece . 13
4.6.20 Lines 12 to 16: Tensile (T) . 14
4.6.21 Line 17: Hardness . 14
4.6.22 Line 18: Shear strength . 14
4.6.23 Line 19: Bending . 14
4.6.24 Line 20: Impact strength . 15
4.6.25 Lines 21 to 26: Creep (C) . 15
4.6.26 Line 27 . 16
4.6.27 Line 28 . 16
4.6.28 Line 29: Reference heat treatment . 16
4.6.29 Lines 30 to 94 . 16
4.6.30 Line 95: Marking inspection . 17
4.6.31 Line 96: Dimensional inspection . 17
4.6.32 Line 97 . 17
4.6.33 Line 98: Notes . 17
4.6.34 Line 99: Typical use . 17
4.6.35 Line 100: Product qualification . 17
4.6.36 Line 100: Completion of semi-finished product qualification requirements . 18
Annex A (normative) Template . 19
Annex B (normative) Allocation of numbers to optional lines . 21
Bibliography . 22
Foreword
This document (prEN 4500-001:2025) has been prepared by the Technical Committee ASD-STAN/D04
“Materials”.
This document is currently submitted to the CEN Enquiry
This document will supersede EN 4500-001:2024.
— modification of Table 1 of this document to make it monolingual, thus erasing the French and German
columns;
— addition of the lines 4.3 "Further intended processing" and 5.2 "Dimensional standard" in the body
of the document and in Annex A;
— addition of introductory sentences to Table 1 in Subclause 4.7.1 to highlight the fact that the table is
a normative element and that all the documents that it lists shall be applied;
— addition of a title to Table 1, Table 2 and Figure 1 of this document;
— restructuring of the document and simplification of the Template to achieve a single continuous table.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Introduction
This document is part of the series of EN metallic material standards for aerospace applications.
The general organization of this series is described in EN 4258.
The EN 4500 series (Aerospace series — Metallic materials — Rules for drafting and presentation of
material standards) is composed by the following documents:
— General rules EN 4500-001;
— Specific rules for aluminium, aluminium alloys and EN 4500-002;
magnesium alloys
— Specific rules for heat-resisting alloys EN 4500-003;
— Specific rules for titanium and titanium alloys EN 4500-004;
— Specific rules for steels EN 4500-005;
— Specific rules for filler metals for welding EN 4500-002 to EN 4500-005;
— Specific rules for filler metals for brazing EN 4500-006.
Basis for the drafting of all European standards is CEN/CENELEC Internal Regulations — Part 3: Principles
and rules for the structure and drafting of CEN and CENELEC documents.
1 Scope
The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards
for aerospace applications.
This Part 001 specifies the “General rules” framework valid for all parts.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2002-001, Aerospace series — Metallic materials — Test methods — Part 001: Tensile testing at
ambient temperature
EN 2032-2, Aerospace series — Metallic materials — Part 2: Coding of metallurgical condition in delivery
condition
EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links
between types of European standards and their use
EN 4259, Aerospace series — Metallic materials — Definition of general terms
EN 4500-002, Aer
...