SIST EN ISO 17962:2015/A1:2022
(Amendment)Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems - Amendment 1 (ISO 17962:2015/Amd 1:2021)
Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems - Amendment 1 (ISO 17962:2015/Amd 1:2021)
Landmaschinen - Sägeräte - Minimierung der Umweltauswirkungen von Gebläseabluft bei pneumatischen Geräten - Änderung 1 (ISO 17962:2015/Amd 1:2021)
No scope available
Matériel agricole - Semoirs - Considérations pour reduire au minimum les effets de l'échappement du ventilateur des systèmes pneumatiques - Amendement 1 (ISO 17962:2015/Amd 1:2021)
Kmetijski stroji - Oprema za sejanje - Zmanjšanje vplivov izpuhov iz pnevmatskih sistemov na okolje - Dopolnilo A1 (ISO 17962:2015/Amd 1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17962:2015/A1:2022
01-april-2022
Kmetijski stroji - Oprema za sejanje - Zmanjšanje vplivov izpuhov iz pnevmatskih
sistemov na okolje - Dopolnilo A1 (ISO 17962:2015/Amd 1:2021)
Agricultural machinery - Equipment for sowing - Minimization of the environmental
effects of fan exhaust from pneumatic systems - Amendment 1 (ISO 17962:2015/Amd
1:2021)
Landmaschinen - Sägeräte - Minimierung der Umweltauswirkungen von Gebläseabluft
bei pneumatischen Geräten - Änderung 1 (ISO 17962:2015/Amd 1:2021)
Matériel agricole - Semoirs - Considérations pour reduire au minimum les effets de
l'échappement du ventilateur des systèmes pneumatiques - Amendement 1 (ISO
17962:2015/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 17962:2015/A1:2022
ICS:
65.060.30 Sejalna in sadilna oprema Sowing and planting
equipment
SIST EN ISO 17962:2015/A1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17962:2015/A1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 17962:2015/A1:2022
EN ISO 17962:2015/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2022
EUROPÄISCHE NORM
ICS 65.060.30
English Version
Agricultural machinery - Equipment for sowing -
Minimization of the environmental effects of fan exhaust
from pneumatic systems - Amendment 1 (ISO
17962:2015/Amd 1:2021)
Matériel agricole - Semoirs - Considérations pour Landmaschinen - Sägeräte - Minimierung der
reduire au minimum les effets de l'échappement du Umweltauswirkungen von Gebläseabluft bei
ventilateur des systèmes pneumatiques - Amendement pneumatischen Geräten - Änderung 1 (ISO
1 (ISO 17962:2015/Amd 1:2021) 17962:2015/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 17962:2015; it was approved by CEN on 19 December 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17962:2015/A1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17962:2015/A1:2022
EN ISO 17962:2015/A1:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17962:2015/A1:2022
EN ISO 17962:2015/A1:2022 (E)
European foreword
This document (EN ISO 17962:2015/A1:2022) has been prepared by Technical Committee ISO/TC 23
"Tractors and machinery for agriculture and forestry" in collaboration with Technical Committee
CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by
AFNOR.
This Amendment to the European Standard EN ISO 17962:2015 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2022, and
conflicting national standards shall be withdrawn at the latest by July 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 17962:2015/Amd 1:2021 has been approved by CEN as EN ISO 17962:2015/A1:2022
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17962:2015/A1:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 17962:2015/A1:2022
INTERNATIONAL ISO
STANDARD 17962
First edition
2015-07-01
AMENDMENT 1
2021-12
Agricultural machinery — Equipment
for sowing — Minimization of the
environmental effects of fan exhaust
from pneumatic systems
AMENDMENT 1
Matériel agricole — Semoirs — Considérations pour réduire au
minimum les effets de l'échappement du ventilateur des systèmes
pneumatiques
AMENDEMENT 1
Reference number
ISO 17962:2015/Amd.1:2021(E)
© ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 17962:2015/A1:2022
ISO 17962:2015/Amd.1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17962:2015/A1:2022
ISO 17962:2015/Amd.1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of pate
...
SLOVENSKI STANDARD
SIST EN ISO 17962:2015/oprA1:2021
01-februar-2021
Kmetijski stroji - Oprema za sejanje - Zmanjšanje vplivov izpuhov iz pnevmatskih
sistemov na okolje - Dopolnilo A1 (ISO 17962:2015/DAM 1:2020)
Agricultural machinery - Equipment for sowing - Minimization of the environmental effects
of fan exhaust from pneumatic systems - Amendment 1 (ISO 17962:2015/DAM 1:2020)
Landmaschinen - Sägeräte - Minimierung der Umweltauswirkungen von Gebläseabluft
bei pneumatischen Geräten - Änderung 1 (ISO 17962:2015/DAM 1:2020)
Matériel agricole - Semoirs - Considérations pour reduire au minimum les effets de
l'échappement du ventilateur des systèmes pneumatiques - Amendement 1(ISO
17962:2015/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 17962:2015/prA1
ICS:
65.060.30 Sejalna in sadilna oprema Sowing and planting
equipment
SIST EN ISO 17962:2015/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17962:2015/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 17962:2015/oprA1:2021
DRAFT AMENDMENT
ISO 17962:2015/DAM 1
ISO/TC 23/SC 3 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-12-25 2021-03-19
Agricultural machinery — Equipment for sowing —
Minimization of the environmental effects of fan exhaust
from pneumatic systems
AMENDMENT 1
Matériel agricole — Semoirs — Considérations pour réduire au minimum les effets de l'échappement du
ventilateur des systèmes pneumatiques
AMENDEMENT 1
ICS: 65.060.30
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 17962:2015/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
SIST EN ISO 17962:2015/oprA1:2021
ISO 17962:2015/DAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 17962:2015/oprA1:2021
ISO 17962:2015/DAM 1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for
agriculture and forestry, Subcommittee SC 3, safety and comfort, Working Group WG 14, Environmental
aspects of seeding equipment.
This document amends the first edition (ISO 17962:2015.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 17962:2015/oprA1:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 17962:2015/oprA1:2021
ISO 17962:2015/DAM 1:2020(E)
Agricultural machinery — Equipment for sowing —
Minimization of the environmental effects of fan exhaust
from pneumatic systems
AMENDMENT 1
ISO 17962:2015 / CD DAmd 1
Modify clause 3.1 to read:
3.1 General
A means of minimizing the effects of fan exhaust from pneumatic systems shall be employed using
either of the methods found in 3.2, 3.3 or 3.4.
The application of design principles is an acceptable means to minimize the effects of fan exhaust.
Alternatively, testing methods can be used to verify conformance.
Modify title of 3.3 to read:
3.3 Field test method
Add the new sentence in clause 3.3.1.1 as follows:
The testing area shall be a field that has been prepared for sowing. The test area shall be either level
tilled soil or plant material not greater than 10 cm above the soil sur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.