SIST EN 61850-7-410:2013

Communication networks and systems for power utility automation - Part 7-410: Hydroelectric power plants - Communication for monitoring and control

This part of IEC 61850 specifies the additional common data classes, logical nodes and data objects required for the use of IEC 61850 in a hydropower plant.

Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen Energieversorgung - Teil 7-410: Wasserkraftwerke - Kommunikation für Überwachung, Regelung und Steuerung

Réseaux et systèmes de communication pour l'automatisation des systèmes électriques - Partie 7-410: Centrales hydroélectriques - Communication pour contrôle et commande

La CEI 61850-7-410:2012 spécifie les classes de données communes, noeuds logiques et objets de données complémentaires qui sont indispensables pour l'utilisation de la CEI 61850 dans une centrale hydroélectrique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:  - les noeuds logiques dans la CEI 61850-7-410:2007, qui n'étaient pas spécifiques aux centrales hydroélectriques, ont été transférés dans la CEI 61850-7-4:2010;  - les définitions des noeuds logiques dans cette édition de la CEI 61850-7-410 ont été mises à jour;  - la plupart des exemples de modélisation et d'informations de référence inclus dans la CEI 61850-7-410:2007 ont été transférés dans la CEI/TR 61850-7-510.  Cette édition de la CEI 61850-7-410 inclut des noeuds logiques complémentaires d'usage général qui ne sont pas inclus dans la CEI 61850-7-4:2010 et qui sont indispensables pour représenter le système complet de contrôle - commande d'une centrale hydroélectrique.

Komunikacijska omrežja in sistemi za avtomatizacijo uporabe električne energije - 7-410. del: Hidroelektrarne - Komunikacije za nadzorovanje in krmiljenje (IEC 61850-7-410:2012)

Ta del IEC 61850 določa dodatne skupne razrede podatkov, logična vozlišča in podatkovne objekte, ki se zahtevajo za skladnost s IEC 61850 v hidroelektrarni.

General Information

• Status: Published
• Publication Date: 12-Aug-2013
• ICS: 27.140 - Hydraulic energy engineering
• ICS: 29.240.30 - Control equipment for electric power systems
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: PSE - Power systems management
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Jan-2013
• Due Date: 31-Mar-2013
• Completion Date: 13-Aug-2013
• Ref Project: EN 61850-7-410:2013 - Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control

Relations

• Replaces: SIST EN 61850-7-410:2008 - Communication networks and systems for power utility automation -- Part 7-410: Hydroelectric power plants - Communication for monitoring and control
• Effective Date: 01-Sep-2013
• Replaces: SIST EN 61850-7-410:2008 - Communication networks and systems for power utility automation -- Part 7-410: Hydroelectric power plants - Communication for monitoring and control
• Effective Date: 28-Jan-2023
• Amended By: SIST EN 61850-7-410:2013/A1:2016 - Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control
• Effective Date: 01-Apr-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61850-7-410:2013
01-september-2013
1DGRPHãþD
SIST EN 61850-7-410:2008
.RPXQLNDFLMVNDRPUHåMDLQVLVWHPL]DDYWRPDWL]DFLMRXSRUDEHHOHNWULþQHHQHUJLMH
GHO+LGURHOHNWUDUQH.RPXQLNDFLMH]DQDG]RURYDQMHLQNUPLOMHQMH,(&

Communication networks and systems for power utility automation - Part 7-410:
Hydroelectric power plants - Communication for monitoring and control
Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen
Energieversorgung - Teil 7-410: Wasserkraftwerke - Kommunikation für Überwachung,
Regelung und Steuerung
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques
- Partie 7-410: Centrales hydroélectriques - Communication pour contrôle et commande
Ta slovenski standard je istoveten z: EN 61850-7-410:2013
ICS:
27.140 Vodna energija Hydraulic energy engineering
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
SIST EN 61850-7-410:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61850-7-410:2013

---------------------- Page: 2 ----------------------

SIST EN 61850-7-410:2013

EUROPEAN STANDARD
EN 61850-7-410

NORME EUROPÉENNE
January 2013
EUROPÄISCHE NORM

ICS 33.200 Supersedes EN 61850-7-410:2007


English version


Communication networks and systems for power utility automation -
Part 7-410: Basic communication structure -
Hydroelectric power plants -
Communication for monitoring and control
(IEC 61850-7-410:2012)


Réseaux et systèmes de communication Kommunikationsnetze und -systeme für
pour l'automatisation die Automatisierung in der elektrischen
des systèmes électriques - Energieversorgung -
Partie 7-410: Structure Teil 7-410: Wasserkraftwerke -
de communication de base - Kommunikation für Überwachung,
Centrales hydroélectriques - Regelung und Steuerung
Communication pour le contrôle- (IEC 61850-7-410:2012)
commande
(CEI 61850-7-410:2012)



This European Standard was approved by CENELEC on 2012-12-04. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61850-7-410:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61850-7-410:2013
EN 61850-7-410:2013 - 2 -

Foreword
The text of document 57/1274/FDIS, future edition 2 of IEC 61850-7-410, prepared by IEC TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61850-7-410:2013.

The following dates are fixed:
(dop) 2013-09-04
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-12-04

standards conflicting with the
document have to be withdrawn

This document supersedes EN 61850-7-410:2007.
EN 61850-7-410:2013 includes the following significant technical changes with respect to EN 61850-7-
410:2007:
a) The logical nodes in EN 61850-7-410:2007 that were not specific to hydropower plants have been
transferred to EN 61850-7-4:2010 and have been removed from this edition of EN 61850-7-410.
b) The definitions of logical nodes in this edition of EN 61850-7-410 have been updated using the format
introduced in EN 61850-7-4:2010.
c) Most of the modelling examples and background information that was included in EN 61850-7-
410:2007 has been transferred to IEC/TR 61850-7-510.
d) However, this edition of EN 61850-7-410 includes additional general-purpose logical nodes that were
not included in EN 61850-7-4:2010, but are required in order to represent the complete control and
monitoring system of a hydropower plant.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61850-7-410:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61362 NOTE  Harmonized as EN 61362.
IEC 61850-10 NOTE  Harmonized as EN 61850-10.
IEC 61970-301 NOTE  Harmonized as EN 61970-301.
IEC 62270 NOTE  Harmonized as EN 62270.

---------------------- Page: 4 ----------------------

SIST EN 61850-7-410:2013
- 3 - EN 61850-7-410:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC/TS 61850-2 - Communication networks and systems in - -
substations -
Part 2: Glossary


IEC 61850-7-1 - Communication networks and systems for EN 61850-7-1 -
power utility automation -
Part 7-1: Basic communication structure -
Principles and models



IEC 61850-7-2 2010 Communication networks and systems for EN 61850-7-2 2010
power utility automation -
Part 7-2: Basic information and
communication structure - Abstract
communication service interface (ACSI)



IEC 61850-7-3 2010 Communication networks and systems for EN 61850-7-3 2011
power utility automation -
Part 7-3: Basic communication structure -
Common data classes



IEC 61850-7-4 2010 Communication networks and systems for EN 61850-7-4 2010
power utility automation -
Part 7-4: Basic communication structure -
Compatible logical node classes and data
object classes

---------------------- Page: 5 ----------------------

SIST EN 61850-7-410:2013

---------------------- Page: 6 ----------------------

SIST EN 61850-7-410:2013




IEC 61850-7-410

®


Edition 2.0 2012-10




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Communication networks and systems for power utility automation –

Part 7-410: Basic communication structure – Hydroelectric power plants –

Communication for monitoring and control




Réseaux et systèmes de communication pour l'automatisation des systèmes

électriques –


Partie 7-410: Structure de communication de base – Centrales

hydroélectriques – Communication pour le contrôle-commande












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX XB


ICS 33.200 ISBN 978-2-83220-436-8



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61850-7-410:2013
– 2 – 61850-7-410  IEC:2012
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Abbreviated terms . 7
5 Logical node classes . 8
5.1 Logical node groups . 8
5.2 Interpretation of logical node tables . 9
5.3 Summary of logical nodes to be used in hydropower plants . 11
5.3.1 General . 11
5.3.2 Group A – Automatic functions . 11
5.3.3 Group F – Functional blocks . 11
5.3.4 Group H – Hydropower specific logical nodes . 11
5.3.5 Group I – Interface and archiving . 12
5.3.6 Group K – Mechanical and non-electrical primary equipment . 13
5.3.7 Group P – Protection functions . 13
5.3.8 Group R – Protection related functions . 13
5.3.9 Group S – Supervision and monitoring . 13
5.3.10 Group X – Switchgear . 13
5.4 Automatic control logical nodes LN group A . 13
5.4.1 Modelling remarks . 13
5.4.2 LN: Control mode selection Name: ACTM . 14
5.4.3 LN: Joint control Name: AJCL . 14
5.4.4 LN: PSS 4B filter function Name: APSF . 14
5.4.5 LN: PSS control, common information Name: APSS . 16
5.4.6 LN: PSS 2A/B filter function Name: APST . 17
5.5 Functional logical nodes LN Group F . 17
5.5.1 Modelling remarks . 17
5.5.2 LN: Functional heartbeat Name: FHBT . 18
5.5.3 LN: Scheduler Name: FSCH . 18
5.5.4 LN: Functional priority status Name: FXPS . 18
5.6 Hydropower specific logical nodes LN group H . 19
5.6.1 Modelling remarks . 19
5.6.2 LN: Turbine – generator shaft bearing Name: HBRG . 19
5.6.3 LN: Combinator Name: HCOM . 20
5.6.4 LN: Hydropower dam Name: HDAM . 20
5.6.5 LN: Deflector control Name: HDFL . 20
5.6.6 LN: Dam leakage supervision Name: HDLS . 21
5.6.7 LN: Electrical brake Name: HEBR . 21
5.6.8 LN: Governor control mode Name: HGOV . 21
5.6.9 LN: Gate position indicator Name: HGPI . 22
5.6.10 LN: Dam gate Name: HGTE . 22
5.6.11 LN: Intake gate Name: HITG . 23
5.6.12 LN: Joint control Name: HJCL. 23
5.6.13 LN: Leakage supervision Name: HLKG . 24
5.6.14 LN: Water level indicator Name: HLVL . 24

---------------------- Page: 8 ----------------------

SIST EN 61850-7-410:2013
61850-7-410  IEC:2012 – 3 –
5.6.15 LN: Mechanical brake Name: HMBR . 25
5.6.16 LN: Needle control Name: HNDL . 25
5.6.17 LN: Water net head data Name: HNHD . 26
5.6.18 LN: Dam over-topping protection Name: HOTP . 26
5.6.19 LN: Hydropower / water reservoir Name: HRES . 27
5.6.20 LN: Hydropower unit sequencer Name: HSEQ . 27
5.6.21 LN: Speed monitoring Name: HSPD . 27
5.6.22 LN: Surge shaft Name: HSST . 28
5.6.23 LN: Guide vanes (wicket gate) Name: HTGV . 29
5.6.24 LN: Runner blades Name: HTRB . 29
5.6.25 LN: Trash rack Name: HTRK . 30
5.6.26 LN: Turbine Name: HTUR . 30
5.6.27 LN: Hydropower unit Name: HUNT . 31
5.6.28 LN: Valve (butterfly valve, ball valve) Name: HVLV . 32
5.6.29 LN: Water control Name: HWCL . 33
5.7 Logical nodes for interface and archiving LN group I . 34
5.7.1 Modelling remarks . 34
5.7.2 LN: Fire detection and alarm Name: IFIR . 34
5.7.3 LN: Hand interface  Name: IHND . 34
5.8 Logical nodes for mechanical and non-electric primary equipment LN group
K . 35
5.8.1 Modelling remarks . 35
5.8.2 LN: Heater, cubicle heater Name: KHTR . 35
5.9 Logical nodes for protection functions LN group P . 35
5.9.1 Modelling remarks . 35
5.9.2 LN: Rotor protection Name: PRTR . 35
5.10 Logical nodes for protection related functions LN group R . 36
5.10.1 Modelling remarks . 36
5.10.2 LN: Field breaker configuration Name: RFBC . 36
5.11 Logical nodes for supervision and monitoring  LN group S. 36
5.11.1 Modelling remarks . 36
5.11.2 LN: Supervision of media flow Name: SFLW . 36
5.11.3 LN: Supervision of media level Name: SLVL . 37
5.11.4 LN: Supervision of the position of a device Name: SPOS . 38
5.11.5 LN: Supervision media pressure Name: SPRS . 39
5.12 Logical nodes for switchgear LN group X . 41
5.12.1 Modelling remarks . 41
5.12.2 LN: Switching control for field flashing Name: XFFL . 41
6 Data name semantics . 41
7 Common data classes . 54
7.1 General . 54
7.2 Maintenance and operational tag (TAG) . 54
7.3 Operational restriction (RST) . 55
8 Data attribute semantics . 55
Bibliography . 59

Table 1 – Abbreviated terms . 8
Table 2 – List of logical node groups . 9

---------------------- Page: 9 ----------------------

SIST EN 61850-7-410:2013
– 4 – 61850-7-410  IEC:2012
Table 3 – Interpretation of logical node tables . 10
Table 4 – Logical nodes for automatic functions . 11
Table 5 – Logical nodes representing functional blocks. 11
Table 6 – Hydropower specific logical nodes . 11
Table 7 – Logical nodes for interface and archiving . 12
Table 8 – Logical nodes for mechanical and non-electric primary equipment. 13
Table 9 – Logical nodes for protections. 13
Table 10 – Logical nodes for protection related functions . 13
Table 11 – Logical nodes for supervision and monitoring . 13
Table 12 – Logical nodes for switchgear . 13
Table 13 – PSS filter comparison . 16
Table 14 – Description of data . 41
Table 15 – Semantics of data attributes . 56

---------------------- Page: 10 ----------------------

SIST EN 61850-7-410:2013
61850-7-410  IEC:2012 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

COMMUNICATION NETWORKS AND SYSTEMS
FOR POWER UTILITY AUTOMATION –

Part 7-410: Basic communication structure –
Hydroelectric power plants –
Communication for monitoring and control


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61850-7-410 has been prepared by technical committee 57: Power
systems management and associated information exchange.
This second edition cancels and replaces the first edition published in 2007, and constitutes a
technical revision. This edition includes the following significant technical changes with
respect to the previous edition:
a) The logical nodes in IEC 61850-7-410:2007 that were not specific to hydropower plants
have been transferred to IEC 61850-7-4:2010 and have been removed from this edition of
IEC 61850-7-410.
b) The definitions of logical nodes in this edition of IEC 61850-7-410 have been updated
using the format introduced in IEC 61850-7-4:2010.
c) Most of the modelling examples and background information that was included in
IEC 61850-7-410:2007 has been transferred to IEC/TR 61850-7-510.

---------------------- Page: 11 ----------------------

SIST EN 61850-7-410:2013
– 6 – 61850-7-410  IEC:2012
d) However, this edition of IEC 61850-7-410 includes additional general-purpose logical
nodes that were not included in IEC 61850-7-4:2010, but are required in order to represent
the complete control and monitoring system of a hydropower plant.
The text of this standard is based on the following documents:
FDIS Report on voting
57/1274/FDIS 57/1289/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.


A list of all the parts in the IEC 61850 series, published under the general title
Communication networks and systems for power utility automation can be found on the IEC
website.

The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 12 ----------------------

SIST EN 61850-7-410:2013
61850-7-410  IEC:2012 – 7 –
COMMUNICATION NETWORKS AND SYSTEMS
FOR POWER UTILITY AUTOMATION –

Part 7-410: Basic communication structure –
Hydroelectric power plants –
Communication for monitoring and control



1 Scope
This part of IEC 61850 specifies the additional common data classes, logical nodes and data
objects required for the use of IEC 61850 in a hydropower plant.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC/TS 61850-2, Communication networks and systems in substations – Part 2: Glossary
IEC 61850-7-1, Communication networks and systems for power utility automation – Part 7-1:
Basic communication structure – Principles and models
IEC 61850-7-2:2010, Communication networks and systems for power utility automation –
Part 7-2: Basic information and communication structure – Abstract communication service
interface (ACSI)
IEC 61850-7-3:2010, Communication networks and systems for power utility automation –
Part 7-3: Basic communication structure for substations and feeder equipment – Common
data classes
IEC 61850-7-4:2010, Communication networks and systems for power utility automation –
Part 7-4: Basic communication structure – Compatible logical node classes and data object
classes
3 Terms and definitions
For the purpose of this document, the terms and definitions given in IEC 61850-2 apply.
4 Abbreviated terms
The terms listed in Table 1 are used to build concatenated Data Object Names in this
document. IEC 61850-7-410 inherits all the abbreviated terms described in Clause 4 of
IEC 61850-7-4:2010.
NOTE Data Object Names in the logical nodes representing PSS filter functions follow names in IEEE 421.5 as
closely as possible. These names are not included in Table 1.

---------------------- Page: 13 ----------------------

SIST EN 61850-7-410:2013
– 8 – 61850-7-410  IEC:2012
Table 1 – Abbreviated terms
Term Description Term Description
a
Act Action, activity, active, activate Lkg Leakage
Atr Actuator Lub Lubrication
BG Before Gain Man Manual (- operation selected)
Brg Bearing Mnt Maintenance
Brk Brake Ndl Needle (used in Pelton turbines)
Bt Heartbeat Nhd Net head
BtB Back-to-Back Nrm Normal
Cam Cam, e.g. rotating non-circular disk Nxt Next
a
Cap Capacity, capability Off Device disengaged (= off)
Cbr Calibration On Device applied (= on)
Cff coefficient Operate Operate order to any device
a
Cm Centimetres Opn
Open, opened, opening
Cmpl Completed, completion, complete Pe Electric power
Cnd Condenser, synchronous compensator Pmp Pump
Crl Correlation Polytr Polytropic
Crp Creeping, slow movement Prec Precondition, initial status
Cwb Crowbar Prt Priority
De Remove Psk Penstock
Deg Degrees, for angle indication in
...