Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams

This part of ISO 1219 establishes the main rules for drawing hydraulic and pneumatic circuit diagrams using graphical symbols drawn in accordance with ISO 1219-1. This part of ISO 1219 also applies to circuit diagrams relating to cooling systems, lubrication systems, cooling lubricant systems and systems of technical gases used in conjunction with fluid power applications. It also includes examples of circuit diagrams.

Transmissions hydrauliques et pneumatiques - Symboles graphiques et schémas de circuit - Partie 2: Schémas de circuit

L'ISO 1219-2:2012 �tablit les r�gles principales pour dessiner des sch�mas de circuits hydrauliques et pneumatiques en utilisant des symboles graphiques conformes � l'ISO 1219-1.
L'ISO 1219-2:2012 s'applique �galement aux sch�mas de circuit relatifs aux syst�mes r�frig�rants, de lubrification, de refroidissement et de gaz techniques utilis�s en conjonction avec les applications de transmissions hydrauliques et pneumatiques.

Fluidna tehnika - Fluidni sistemi in njihove komponente - Grafični simboli in sheme - 2. del: Sheme

General Information

Status
Published
Public Enquiry End Date
31-Jan-2014
Publication Date
06-Feb-2014
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Feb-2014
Due Date
11-Apr-2014
Completion Date
07-Feb-2014

Relations

Buy Standard

Standard
ISO 1219-2:2012
English language
50 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1219-2:2014
English and French language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
ISO 1219-2:2014
English and French language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO

STANDARD 1219-2
NORME
Second edition
Deuxième édition
INTERNATIONALE
2012-09-01


Fluid power systems and components —
Graphical symbols and circuit
diagrams —
Part 2:
Circuit diagrams
Transmissions hydrauliques et
pneumatiques — Symboles graphiques et
schémas de circuit —
Partie 2:

Schémas de circuit





Reference number
Numéro de référence
ISO 1219-2:2012(E/F)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 1219-2:2012(E/F)

COPYRIGHT PROTECTED DOCUMENT
DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester. / Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris
la photocopie et les microfilms, sans l'accord écrit de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du
demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1219-2:2012(E/F)
Contents Page
Foreword . vii
Introduction . ix
1  Scope . 1
2  Normative references . 2
3  Terms and definitions . 3
4  General rules . 3
4.1  Presentation . 3
4.2  Format . 4
4.3  Layout . 5
4.4  Equipment . 8
5  Rules for identification of equipment in fluid power circuits . 9
5.1  Identification code of components and hose assemblies . 9
5.1.1  General . 9
5.1.2  Installation code (XXX.X) . 11
5.1.3  Medium code (XXX.X) . 11
5.1.4  Circuit number (XXX.X) . 12
5.1.5  Component number (XXX.X) . 12
5.2  Port identification . 12
5.3  Identification code for piping . 13
5.3.1  General . 13
5.3.2  Optional identification number . 14
5.3.3  Technical information . 14
5.3.4  Examples . 15
5.4  Optional application code for piping . 15
5.4.1  General . 15
5.4.2  Medium code . 16
5.4.3  Line code . 17
5.4.4  Pressure level index . 17
5.4.5  Example . 17
6  Technical information on the circuit diagram . 18
6.1  General . 18
6.2  Circuit function . 18
6.3  Electrical reference designation . 18
6.4  Components . 19
6.4.1  Reservoirs, receivers and surge tanks . 19
6.4.2  Air supply . 20
6.4.3  Pumps . 20
6.4.4  Prime movers . 21
6.4.5  Directional control valves . 21
6.4.6  Flow control valves, orifices and non-adjustable throttle valves . 22
6.4.7  Pressure control valves and pressure switches . 22
6.4.8  Cylinders . 22
6.4.9  Semi-rotary actuators . 23
6.4.10  Motors . 23
6.4.11  Accumulators . 24
6.4.12  Filters . 24
6.4.13  Piping . 25
6.4.14  Fluid level indicators . 25
6.4.15  Temperature indicators. 25
© ISO 2012 – All rights reserved/Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1219-2:2012(E/F)
6.4.16  Thermostats .25
6.4.17  Pressure gauges .25
6.4.18  Timers .26
7  Supplementary information .26
8  Examples of circuit diagrams .26
9  Identification statement (reference to this part of ISO 1219) .27
Annex A (informative) Relationship among the individual parts of the identification code of
components and hose assemblies .28
Annex B (informative) Example of a hydraulic circuit diagram .29
Annex C (informative) Example of a pneumatic circuit diagram .33
Annex D (informative) Example of a lubrication circuit diagram .37
Annex E (informative) Example of a parts list (in reference to the first page of the circuit diagram in
Annex B) .40
Bibliography .42


iv © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 1219-2:2012(E/F)
Sommaire
Avant-propos . viii
Introduction . x
1  Domaine d'application . 1
2  Références normatives . 2
3  Termes et définitions . 3
4  Règles générales . 3
4.1  Présentation . 3
4.2  Format . 4
4.3  Disposition des dessins . 5
4.4  Appareils . 8
5  Règles d’identification des appareils dans les circuits hydrauliques et pneumatiques . 9
5.1  Code d'identification des composants et des ensembles flexibles . 9
5.1.1  Généralités . 9
5.1.2  Code de groupe fonctionnel (XXX.X) . 11
5.1.3  Code de fluide (XXX.X) . 11
5.1.4  Numéro de circuit (XXX.X) . 12
5.1.5  Numéro de composant (XXX.X) . 12
5.2  Identification des orifices . 12
5.3  Code d'identification des réseaux de tuyauterie . 13
5.3.1  Généralités . 13
5.3.2  Numéro d'identification facultatif . 14
5.3.3  Informations techniques . 14
5.3.4  Exemples . 15
5.4  Code d'application facultatif pour les réseaux de tuyauterie . 15
5.4.1  Généralités . 15
5.4.2  Code de fluide . 16
5.4.3  Code de conduite . 17
5.4.4  Indicateur de niveau de pression . 17
5.4.5  Exemple . 17
6  Informations techniques sur le schéma de circuit . 18
6.1  Généralités . 18
6.2  Fonction du circuit . 18
6.3  Désignation des références électriques . 18
6.4  Composants . 19
6.4.1  Réservoirs, récepteurs d'air et réservoirs tampon . 19
6.4.2  Alimentation d'air . 20
6.4.3  Pompes . 20
6.4.4  Dispositifs d'entraînement . 21
6.4.5  Distributeurs de commande directionnelle . 21
6.4.6  Régulateurs de débit, orifices et soupapes d’étranglement non réglables . 22
6.4.7  Distributeurs de commande de pression et pressostats . 22
6.4.8  Vérins . 22
6.4.9  Actionneurs semi-rotatifs . 23
6.4.10  Moteurs . 23
6.4.11  Accumulateurs . 24
6.4.12  Filtres . 24
6.4.13  Réseau de tuyauterie . 25
6.4.14  Indicateurs de niveau de fluide . 25
6.4.15  Indicateur de température . 25
© ISO 2012 – All rights reserved/Tous droits réservés v

---------------------- Page: 5 ----------------------
ISO 1219-2:2012(E/F)
6.4.16  Régulateurs de température .25
6.4.17  Manomètres .25
6.4.18  Minuteries .26
7  Informations supplémentaires .26
8  Exemples de schémas de circuit .26
9  Phrase d'identification (référence à la présente partie de l'ISO 1219) .27
Annexe A (informative) Rapports entre les parties du code d'identification des composants et des
ensembles flexibles .28
Annexe B (informative) Exemple de schéma de circuit hydraulique .29
Annexe C (informative) Exemple de schéma de circuit pneumatique .33
Annexe D (informative) Exemple de schéma de circuit de lubrification .37
Annexe E (informative) Exemple de nomenclature (en référence à la première page du schéma de
circuit de l'Annexe B) .40
Bibliographie .42

vi © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 6 ----------------------
ISO 1219-2:2012(E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1219-1 was prepared by Technical Committee ISO/TC 131, Fluid power systems.
This second edition cancels and replaces the second edition (ISO 1219-2:1995), which has been technically
revised.
ISO 1219 consists of the following parts, under the general title Fluid power systems and components —
Graphical symbols and circuit diagrams:
 Part 1: Graphical symbols for conventional use and data-processing applications
 Part 2: Circuit diagrams
© ISO 2012 – All rights reserved/Tous droits réservés vii

---------------------- Page: 7 ----------------------
ISO 1219-2:2012(E/F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 1219-1 a été élaborée par le comité technique ISO/TC 131, Transmissions hydrauliques et
pneumatiques.
Cette deuxième édition annule et remplace la deuxième édition (ISO 1219-2:1995), dont elle constitue une
révision mineure.
L'ISO 1219 comprend les parties suivantes, présentées sous le titre général Transmissions hydrauliques et
pneumatiques — Symboles graphiques et schémas de circuit:
 Partie 1: Symboles graphiques en emploi conventionnel et informatisé
 Partie 2: Schémas de circuit
viii © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 8 ----------------------
ISO 1219-2:2012(E/F)
Introduction
In fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within
a circuit.
Circuit diagrams are an aid to facilitate the understanding of the design and description of installations so that,
by having unified representations, confusion and error can be avoided during planning, manufacturing,
installation and maintenance.
For a clear identification of the components shown on the circuit diagram, a component identification code is
used. The structure provided with the first edition of ISO 1219-2 consisted of the following levels: installation,
circuit and component. In addition, for components, a letter for the identification of groups of components, for
example P for pumps, and V for valves, was used. With the publication of IEC 1346-1:1995, the principle of
structuring of installations in accordance with ISO 1219-2 was accepted, but in IEC 61346-2:2000 different
letter symbols for the classification of objects were provided. To avoid any potential misunderstanding caused
by the use of letter symbols for groups of components, no letter symbols are used for the identification code of
components in this edition of ISO 1219-2.

© ISO 2012 – All rights reserved/Tous droits réservés ix

---------------------- Page: 9 ----------------------
ISO 1219-2:2012(E/F)
Introduction
Dans les systèmes de transmissions hydrauliques et pneumatiques, I’énergie est transmise et commandée
par I’intermédiaire d’un fluide (liquide ou gaz) sous pression circulant dans un circuit.
Les schémas de circuit constituent une aide facilitant la compréhension de I’étude et la description des
installations par des représentations normalisées, permettant d’éviter toute confusion et erreur lors du
développement, de la production, de I’installation et de la maintenance.
Pour une identification claire des composants représentés sur le schéma de circuit, un code d'identification de
composant est utilisé. La structure d'identification de la première édition de l'ISO 1219-2 était constituée des
niveaux suivants: installation, circuit et composants. De plus, pour les composants, une lettre permettant
d'identifier le groupe de composants était utilisée, par exemple P pour pompes ou V pour distributeurs. Avec
la publication de la CEI 1346-1:1995, le principe de structuration des installations conformément à
l'ISO 1219-2 a été accepté, mais dans la CEI 61346-2:2000, des lettres différentes servaient à la classification
des objets. Afin d'éviter toute incompréhension éventuelle due à l'utilisation de symboles littéraux pour les
groupes de composants, aucun symbole littéral n'est utilisé dans le code d'identification des composants dans
la présente édition de l'ISO 1219-2.

x © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 10 ----------------------
INTERNATIONAL STANDARD
ISO 1219-2:2012(E/F)
NORME INTERNATIONALE


Fluid power systems and Transmissions hydrauliques
components — Graphical et pneumatiques — Symboles
symbols and circuit graphiques et schémas de
diagrams — circuit —
Part 2: Partie 2:
Circuit diagrams Schémas de circuit

1 Scope 1 Domaine d'application

This part of ISO 1219 establishes the main rules for La présente partie de l'ISO 1219 établit les règles
drawing hydraulic and pneumatic circuit diagrams principales pour dessiner des schémas de circuits
using graphical symbols drawn in accordance with hydrauliques et pneumatiques en utilisant des
ISO 1219-1. symboles graphiques conformes à l'ISO 1219-1.
This part of ISO 1219 also applies to circuit La présente partie de l'ISO 1219 s'applique
diagrams relating to cooling systems, lubrication également aux schémas de circuit relatifs aux
systems, cooling lubricant systems and systems of systèmes réfrigérants, de lubrification, de refroi-
technical gases used in conjunction with fluid power dissement et de gaz techniques utilisés en
applications. conjonction avec les applications de transmissions
hydrauliques et pneumatiques.
It also includes examples of circuit diagrams.
Elle comprend également des exemples de
schémas de circuit.
NOTE In addition to the text in English and French, NOTE En complément du texte en anglais et en
two of the three official ISO languages, this part of français, deux des trois langues officielles de l'ISO, la
ISO 1219 gives the equivalent text in German; this is présente partie de l'ISO 1219 donne le texte équivalent
published under the responsibility of the member body for en allemand; ce texte est publié sous la responsabilité du
Germany (DIN). However, only the text given in the official comité membre allemand (DIN). Toutefois, seul le texte
languages of ISO can be considered as ISO text. dans les langues officielles peut être considéré comme
étant du texte de l'ISO.
© ISO 2012 – All rights reserved/Tous droits réservés 1

---------------------- Page: 11 ----------------
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Transmissions hydrauliques et pneumatiques - Symboles graphiques et schémas de circuit - Partie 2: Schémas de circuitFluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams23.100.01Fluid power systems in general01.080.30GRNXPHQWDFLMLGraphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentationICS:Ta slovenski standard je istoveten z:ISO 1219-2:2012SIST ISO 1219-2:2014en,fr01-marec-2014SIST ISO 1219-2:2014SLOVENSKI
STANDARD



SIST ISO 1219-2:2014



Reference numberNuméro de référenceISO 1219-2:2012(E/F)© ISO 2012
INTERNATIONAL STANDARD NORME INTERNATIONALE ISO1219-2Second editionDeuxième édition2012-09-01Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams Transmissions hydrauliques et pneumatiques — Symboles graphiques et schémas de circuit — Partie 2: Schémas de circuit
SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F)
COPYRIGHT PROTECTED DOCUMENT DOCUMENT PROTÉGÉ PAR COPYRIGHT ©
ISO 2012 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. / Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur. ISO copyright office Case postale 56  CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland/Publié en Suisse
ii © ISO 2012 – All rights reserved/Tous droits réservés
SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) © ISO 2012 – All rights reserved/Tous droits réservés iii Contents Page Foreword . vii Introduction . ix 1 Scope . 1 2 Normative references . 2 3 Terms and definitions . 3 4 General rules . 3 4.1 Presentation . 3 4.2 Format . 4 4.3 Layout . 5 4.4 Equipment . 8 5 Rules for identification of equipment in fluid power circuits . 9 5.1 Identification code of components and hose assemblies . 9 5.1.1 General . 9 5.1.2 Installation code (XXX.X) . 11 5.1.3 Medium code (XXX.X) . 11 5.1.4 Circuit number (XXX.X) . 12 5.1.5 Component number (XXX.X) . 12 5.2 Port identification . 12 5.3 Identification code for piping . 13 5.3.1 General . 13 5.3.2 Optional identification number . 14 5.3.3 Technical information . 14 5.3.4 Examples . 15 5.4 Optional application code for piping . 15 5.4.1 General . 15 5.4.2 Medium code . 16 5.4.3 Line code . 17 5.4.4 Pressure level index . 17 5.4.5 Example . 17 6 Technical information on the circuit diagram . 18 6.1 General . 18 6.2 Circuit function . 18 6.3 Electrical reference designation . 18 6.4 Components . 19 6.4.1 Reservoirs, receivers and surge tanks . 19 6.4.2 Air supply . 20 6.4.3 Pumps . 20 6.4.4 Prime movers . 21 6.4.5 Directional control valves . 21 6.4.6 Flow control valves, orifices and non-adjustable throttle valves . 22 6.4.7 Pressure control valves and pressure switches . 22 6.4.8 Cylinders . 22 6.4.9 Semi-rotary actuators . 23 6.4.10 Motors . 23 6.4.11 Accumulators . 24 6.4.12 Filters . 24 6.4.13 Piping . 25 6.4.14 Fluid level indicators . 25 6.4.15 Temperature indicators. 25 SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) iv © ISO 2012 – All rights reserved/Tous droits réservés 6.4.16 Thermostats .25 6.4.17 Pressure gauges .25 6.4.18 Timers .26 7 Supplementary information .26 8 Examples of circuit diagrams .26 9 Identification statement (reference to this part of ISO 1219) .27 Annex A (informative)
Relationship among the individual parts of the identification code of components and hose assemblies .28 Annex B (informative)
Example of a hydraulic circuit diagram .29 Annex C (informative)
Example of a pneumatic circuit diagram .33 Annex D (informative)
Example of a lubrication circuit diagram .37 Annex E (informative)
Example of a parts list (in reference to the first page of the circuit diagram in Annex B) .40 Bibliography .42
SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) © ISO 2012 – All rights reserved/Tous droits réservés v Sommaire Avant-propos . viii Introduction . x 1 Domaine d'application . 1 2 Références normatives . 2 3 Termes et définitions . 3 4 Règles générales . 3 4.1 Présentation . 3 4.2 Format . 4 4.3 Disposition des dessins . 5 4.4 Appareils . 8 5 Règles d’identification des appareils dans les circuits hydrauliques et pneumatiques . 9 5.1 Code d'identification des composants et des ensembles flexibles . 9 5.1.1 Généralités . 9 5.1.2 Code de groupe fonctionnel (XXX.X) . 11 5.1.3 Code de fluide (XXX.X) . 11 5.1.4 Numéro de circuit (XXX.X) . 12 5.1.5 Numéro de composant (XXX.X) . 12 5.2 Identification des orifices . 12 5.3 Code d'identification des réseaux de tuyauterie . 13 5.3.1 Généralités . 13 5.3.2 Numéro d'identification facultatif . 14 5.3.3 Informations techniques . 14 5.3.4 Exemples . 15 5.4 Code d'application facultatif pour les réseaux de tuyauterie . 15 5.4.1 Généralités . 15 5.4.2 Code de fluide . 16 5.4.3 Code de conduite . 17 5.4.4 Indicateur de niveau de pression . 17 5.4.5 Exemple . 17 6 Informations techniques sur le schéma de circuit . 18 6.1 Généralités . 18 6.2 Fonction du circuit . 18 6.3 Désignation des références électriques . 18 6.4 Composants . 19 6.4.1 Réservoirs, récepteurs d'air et réservoirs tampon . 19 6.4.2 Alimentation d'air . 20 6.4.3 Pompes . 20 6.4.4 Dispositifs d'entraînement . 21 6.4.5 Distributeurs de commande directionnelle . 21 6.4.6 Régulateurs de débit, orifices et soupapes d’étranglement non réglables . 22 6.4.7 Distributeurs de commande de pression et pressostats . 22 6.4.8 Vérins . 22 6.4.9 Actionneurs semi-rotatifs . 23 6.4.10 Moteurs . 23 6.4.11 Accumulateurs . 24 6.4.12 Filtres . 24 6.4.13 Réseau de tuyauterie . 25 6.4.14 Indicateurs de niveau de fluide . 25 6.4.15 Indicateur de température . 25 SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) vi © ISO 2012 – All rights reserved/Tous droits réservés 6.4.16 Régulateurs de température .25 6.4.17 Manomètres .25 6.4.18 Minuteries .26 7 Informations supplémentaires .26 8 Exemples de schémas de circuit .26 9 Phrase d'identification (référence à la présente partie de l'ISO 1219) .27 Annexe A (informative)
Rapports entre les parties du code d'identification des composants et des ensembles flexibles .28 Annexe B (informative)
Exemple de schéma de circuit hydraulique .29 Annexe C (informative)
Exemple de schéma de circuit pneumatique .33 Annexe D (informative)
Exemple de schéma de circuit de lubrification .37 Annexe E (informative)
Exemple de nomenclature (en référence à la première page du schéma de circuit de l'Annexe B) .40 Bibliographie .42
SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) © ISO 2012 – All rights reserved/Tous droits réservés vii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1219-1 was prepared by Technical Committee ISO/TC 131, Fluid power systems. This second edition cancels and replaces the second edition (ISO 1219-2:1995), which has been technically revised. ISO 1219 consists of the following parts, under the general title Fluid power systems and components — Graphical symbols and circuit diagrams:  Part 1: Graphical symbols for conventional use and data-processing applications  Part 2: Circuit diagrams SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) viii © ISO 2012 – All rights reserved/Tous droits réservés Avant-propos L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique. Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 2. La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres votants. L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de propriété et averti de leur existence. L'ISO 1219-1 a été élaborée par le comité technique ISO/TC 131, Transmissions hydrauliques et pneumatiques. Cette deuxième édition annule et remplace la deuxième édition (ISO 1219-2:1995), dont elle constitue une révision mineure. L'ISO 1219 comprend les parties suivantes, présentées sous le titre général Transmissions hydrauliques et pneumatiques — Symboles graphiques et schémas de circuit:  Partie 1: Symboles graphiques en emploi conventionnel et informatisé  Partie 2: Schémas de circuit SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) © ISO 2012 – All rights reserved/Tous droits réservés ix Introduction In fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within a circuit. Circuit diagrams are an aid to facilitate the understanding of the design and description of installations so that, by having unified representations, confusion and error can be avoided during planning, manufacturing, installation and maintenance. For a clear identification of the components shown on the circuit diagram, a component identification code is used. The structure provided with the first edition of ISO 1219-2 consisted of the following levels: installation, circuit and component. In addition, for components, a letter for the identification of groups of components, for example P for pumps, and V for valves, was used. With the publication of IEC 1346-1:1995, the principle of structuring of installations in accordance with ISO 1219-2 was accepted, but in IEC 61346-2:2000 different letter symbols for the classification of objects were provided. To avoid any potential misunderstanding caused by the use of letter symbols for groups of components, no letter symbols are used for the identification code of components in this edition of ISO 1219-2.
SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) x © ISO 2012 – All rights reserved/Tous droits réservés Introduction Dans les systèmes de transmissions hydrauliques et pneumatiques, I’énergie est transmise et commandée par I’intermédiaire d’un fluide (liquide ou gaz) sous pression circulant dans un circuit. Les schémas de circuit constituent une aide facilitant la compréhension de I’étude et la description des installations par des représentations normalisées, permettant d’éviter toute confusion et erreur lors du développement, de la production, de I’installation et de la maintenance. Pour une identification claire des composants représentés sur le schéma de circuit, un code d'identification de composant est utilisé. La structure d'identification de la première édition de l'ISO 1219-2 était constituée des niveaux suivants: installation, circuit et composants. De plus, pour les composants, une lettre permettant d'identifier le groupe de composants était utilisée, par exemple P pour pompes ou V pour distributeurs. Avec la publication de la CEI 1346-1:1995, le principe de structuration des installations conformément à l'ISO 1219-2 a été accepté, mais dans la CEI 61346-2:2000, des lettres différentes servaient à la classification des objets. Afin d'éviter toute incompréhension éventuelle due à l'utilisation de symboles littéraux pour les groupes de composants, aucun symbole littéral n'est utilisé dans le code d'identification des composants dans la présente édition de l'ISO 1219-2.
SIST ISO 1219-2:2014



INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 1219-2:2012(E/F) © ISO 2012 – All rights reserved/Tous droits réservés 1 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
Transmissions hydrauliques et pneumatiques — Symboles graphiques et schémas de circuit — Partie 2: Schémas de circuit 1 Scope
1 Domaine d'application
This part of ISO 1219 establishes the main rules for drawing hydraulic and pneumatic circuit diagrams using graphical symbols drawn in accordance with ISO 1219-1. This part of ISO 1219 also applies to circuit diagrams relating to cooling systems, lubrication systems, cooling lubricant systems and systems of technical gases used in conjunction with fluid power applications. It also includes examples of circuit diagrams.
La présente partie de l'ISO 1219 établit les règles principales pour dessiner des schémas de circuitshydrauliques et pneumatiques en utilisant des symboles graphiques conformes à l'ISO 1219-1. La présente partie de l'ISO 1219 s'applique également aux schémas de circuit relatifs aux systèmes réfrigérants, de lubrification, de refroi-dissement et de gaz techniques utilisés en conjonction avec les applications de transmissions hydrauliques et pneumatiques. Elle comprend également des exemples de schémas de circuit. NOTE In addition to the text in English and French, two of the three official ISO languages, this part of ISO 1219 gives the equivalent text in German; this ispublished under the responsibility of the member body for Germany (DIN). However, only the text given in the official languages of ISO can be considered as ISO text.
NOTE En complément du texte en anglais et en français, deux des trois langues officielles de l'ISO, la présente partie de l'ISO 1219 donne le texte équivalent en allemand; ce texte est publié sous la responsabilité du comité membre allemand (DIN). Toutefois, seul le textedans les langues officielles peut être considéré comme étant du texte de l'ISO. SIST ISO 1219-2:2014



ISO 1219-2:2012(E/F) 2 © ISO 2012 – All rights reserved/Tous droits réservés 2 Normative referencesThe following referen
...

SLOVENSKI STANDARD
oSIST ISO 1219-2:2014
01-januar-2014
)OXLGQDWHKQLND)OXLGQLVLVWHPLLQQMLKRYHNRPSRQHQWH*UDILþQLVLPEROLLQ
VKHPHGHO6KHPH
Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2:
Circuit diagrams
Transmissions hydrauliques et pneumatiques - Symboles graphiques et schémas de
circuit - Partie 2: Schémas de circuit
Ta slovenski standard je istoveten z: ISO 1219-2:2012
ICS:
01.080.30 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
ULVEDKGLDJUDPLKQDþUWLK mechanical engineering and
]HPOMHYLGLKYVWURMQLãWYXLQ construction drawings,
JUDGEHQLãWYXWHUYXVWUH]QL diagrams, plans, maps and in
WHKQLþQLSURL]YRGQL relevant technical product
GRNXPHQWDFLML documentation
23.100.01 +LGUDYOLþQLVLVWHPLQDVSORãQR Fluid power systems in
general
oSIST ISO 1219-2:2014 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO 1219-2:2014

---------------------- Page: 2 ----------------------
oSIST ISO 1219-2:2014
INTERNATIONAL ISO

STANDARD 1219-2
NORME
Second edition
Deuxième édition
INTERNATIONALE
2012-09-01


Fluid power systems and components —
Graphical symbols and circuit
diagrams —
Part 2:
Circuit diagrams
Transmissions hydrauliques et
pneumatiques — Symboles graphiques et
schémas de circuit —
Partie 2:

Schémas de circuit





Reference number
Numéro de référence
ISO 1219-2:2012(E/F)
©
ISO 2012

---------------------- Page: 3 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)

COPYRIGHT PROTECTED DOCUMENT
DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester. / Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris
la photocopie et les microfilms, sans l'accord écrit de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du
demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 4 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
Contents Page
Foreword . vii
Introduction . ix
1  Scope . 1
2  Normative references . 2
3  Terms and definitions . 3
4  General rules . 3
4.1  Presentation . 3
4.2  Format . 4
4.3  Layout . 5
4.4  Equipment . 8
5  Rules for identification of equipment in fluid power circuits . 9
5.1  Identification code of components and hose assemblies . 9
5.1.1  General . 9
5.1.2  Installation code (XXX.X) . 11
5.1.3  Medium code (XXX.X) . 11
5.1.4  Circuit number (XXX.X) . 12
5.1.5  Component number (XXX.X) . 12
5.2  Port identification . 12
5.3  Identification code for piping . 13
5.3.1  General . 13
5.3.2  Optional identification number . 14
5.3.3  Technical information . 14
5.3.4  Examples . 15
5.4  Optional application code for piping . 15
5.4.1  General . 15
5.4.2  Medium code . 16
5.4.3  Line code . 17
5.4.4  Pressure level index . 17
5.4.5  Example . 17
6  Technical information on the circuit diagram . 18
6.1  General . 18
6.2  Circuit function . 18
6.3  Electrical reference designation . 18
6.4  Components . 19
6.4.1  Reservoirs, receivers and surge tanks . 19
6.4.2  Air supply . 20
6.4.3  Pumps . 20
6.4.4  Prime movers . 21
6.4.5  Directional control valves . 21
6.4.6  Flow control valves, orifices and non-adjustable throttle valves . 22
6.4.7  Pressure control valves and pressure switches . 22
6.4.8  Cylinders . 22
6.4.9  Semi-rotary actuators . 23
6.4.10  Motors . 23
6.4.11  Accumulators . 24
6.4.12  Filters . 24
6.4.13  Piping . 25
6.4.14  Fluid level indicators . 25
6.4.15  Temperature indicators. 25
© ISO 2012 – All rights reserved/Tous droits réservés iii

---------------------- Page: 5 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
6.4.16  Thermostats .25
6.4.17  Pressure gauges .25
6.4.18  Timers .26
7  Supplementary information .26
8  Examples of circuit diagrams .26
9  Identification statement (reference to this part of ISO 1219) .27
Annex A (informative) Relationship among the individual parts of the identification code of
components and hose assemblies .28
Annex B (informative) Example of a hydraulic circuit diagram .29
Annex C (informative) Example of a pneumatic circuit diagram .33
Annex D (informative) Example of a lubrication circuit diagram .37
Annex E (informative) Example of a parts list (in reference to the first page of the circuit diagram in
Annex B) .40
Bibliography .42


iv © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 6 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
Sommaire
Avant-propos . viii
Introduction . x
1  Domaine d'application . 1
2  Références normatives . 2
3  Termes et définitions . 3
4  Règles générales . 3
4.1  Présentation . 3
4.2  Format . 4
4.3  Disposition des dessins . 5
4.4  Appareils . 8
5  Règles d’identification des appareils dans les circuits hydrauliques et pneumatiques . 9
5.1  Code d'identification des composants et des ensembles flexibles . 9
5.1.1  Généralités . 9
5.1.2  Code de groupe fonctionnel (XXX.X) . 11
5.1.3  Code de fluide (XXX.X) . 11
5.1.4  Numéro de circuit (XXX.X) . 12
5.1.5  Numéro de composant (XXX.X) . 12
5.2  Identification des orifices . 12
5.3  Code d'identification des réseaux de tuyauterie . 13
5.3.1  Généralités . 13
5.3.2  Numéro d'identification facultatif . 14
5.3.3  Informations techniques . 14
5.3.4  Exemples . 15
5.4  Code d'application facultatif pour les réseaux de tuyauterie . 15
5.4.1  Généralités . 15
5.4.2  Code de fluide . 16
5.4.3  Code de conduite . 17
5.4.4  Indicateur de niveau de pression . 17
5.4.5  Exemple . 17
6  Informations techniques sur le schéma de circuit . 18
6.1  Généralités . 18
6.2  Fonction du circuit . 18
6.3  Désignation des références électriques . 18
6.4  Composants . 19
6.4.1  Réservoirs, récepteurs d'air et réservoirs tampon . 19
6.4.2  Alimentation d'air . 20
6.4.3  Pompes . 20
6.4.4  Dispositifs d'entraînement . 21
6.4.5  Distributeurs de commande directionnelle . 21
6.4.6  Régulateurs de débit, orifices et soupapes d’étranglement non réglables . 22
6.4.7  Distributeurs de commande de pression et pressostats . 22
6.4.8  Vérins . 22
6.4.9  Actionneurs semi-rotatifs . 23
6.4.10  Moteurs . 23
6.4.11  Accumulateurs . 24
6.4.12  Filtres . 24
6.4.13  Réseau de tuyauterie . 25
6.4.14  Indicateurs de niveau de fluide . 25
6.4.15  Indicateur de température . 25
© ISO 2012 – All rights reserved/Tous droits réservés v

---------------------- Page: 7 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
6.4.16  Régulateurs de température .25
6.4.17  Manomètres .25
6.4.18  Minuteries .26
7  Informations supplémentaires .26
8  Exemples de schémas de circuit .26
9  Phrase d'identification (référence à la présente partie de l'ISO 1219) .27
Annexe A (informative) Rapports entre les parties du code d'identification des composants et des
ensembles flexibles .28
Annexe B (informative) Exemple de schéma de circuit hydraulique .29
Annexe C (informative) Exemple de schéma de circuit pneumatique .33
Annexe D (informative) Exemple de schéma de circuit de lubrification .37
Annexe E (informative) Exemple de nomenclature (en référence à la première page du schéma de
circuit de l'Annexe B) .40
Bibliographie .42

vi © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 8 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1219-1 was prepared by Technical Committee ISO/TC 131, Fluid power systems.
This second edition cancels and replaces the second edition (ISO 1219-2:1995), which has been technically
revised.
ISO 1219 consists of the following parts, under the general title Fluid power systems and components —
Graphical symbols and circuit diagrams:
 Part 1: Graphical symbols for conventional use and data-processing applications
 Part 2: Circuit diagrams
© ISO 2012 – All rights reserved/Tous droits réservés vii

---------------------- Page: 9 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 1219-1 a été élaborée par le comité technique ISO/TC 131, Transmissions hydrauliques et
pneumatiques.
Cette deuxième édition annule et remplace la deuxième édition (ISO 1219-2:1995), dont elle constitue une
révision mineure.
L'ISO 1219 comprend les parties suivantes, présentées sous le titre général Transmissions hydrauliques et
pneumatiques — Symboles graphiques et schémas de circuit:
 Partie 1: Symboles graphiques en emploi conventionnel et informatisé
 Partie 2: Schémas de circuit
viii © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 10 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
Introduction
In fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within
a circuit.
Circuit diagrams are an aid to facilitate the understanding of the design and description of installations so that,
by having unified representations, confusion and error can be avoided during planning, manufacturing,
installation and maintenance.
For a clear identification of the components shown on the circuit diagram, a component identification code is
used. The structure provided with the first edition of ISO 1219-2 consisted of the following levels: installation,
circuit and component. In addition, for components, a letter for the identification of groups of components, for
example P for pumps, and V for valves, was used. With the publication of IEC 1346-1:1995, the principle of
structuring of installations in accordance with ISO 1219-2 was accepted, but in IEC 61346-2:2000 different
letter symbols for the classification of objects were provided. To avoid any potential misunderstanding caused
by the use of letter symbols for groups of components, no letter symbols are used for the identification code of
components in this edition of ISO 1219-2.

© ISO 2012 – All rights reserved/Tous droits réservés ix

---------------------- Page: 11 ----------------------
oSIST ISO 1219-2:2014
ISO 1219-2:2012(E/F)
Introduction
Dans les systèmes de transmissions hydrauliques et pneumatiques, I’énergie est transmise et commandée
par I’intermédiaire d’un fluide (liquide ou gaz) sous pression circulant dans un circuit.
Les schémas de circuit constituent une aide facilitant la compréhension de I’étude et la description des
installations par des représentations normalisées, permettant d’éviter toute confusion et erreur lors du
développement, de la production, de I’installation et de la maintenance.
Pour une identification claire des composants représentés sur le schéma de circuit, un code d'identification de
composant est utilisé. La structure d'identification de la première édition de l'ISO 1219-2 était constituée des
niveaux suivants: installation, circuit et composants. De plus, pour les composants, une lettre permettant
d'identifier le groupe de composants était utilisée, par exemple P pour pompes ou V pour distributeurs. Avec
la publication de la CEI 1346-1:1995, le principe de structuration des installations conformément à
l'ISO 1219-2 a été accepté, mais dans la CEI 61346-2:2000, des lettres différentes servaient à la classification
des objets. Afin d'éviter toute incompréhension éventuelle due à l'utilisation de symboles littéraux pour les
groupes de composants, aucun symbole littéral n'est utilisé dans le code d'identification des composants dans
la présente édition de l'ISO 1219-2.

x © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 12 ----------------------
oSIST ISO 1219-2:2014
INTERNATIONAL STANDARD
ISO 1219-2:2012(E/F)
NORME INTERNATIONALE


Fluid power systems and Transmissions hydrauliques
components — Graphical et pneumatiques — Symboles
symbols and circuit graphiques et schémas de
diagrams — circuit —
Part 2: Partie 2:
Circuit diagrams Schémas de circuit

1 Scope 1 Domaine d'application

This part of ISO 1219 establishes the main rules for La présente partie de l'ISO 1219 établit les règles
drawing hydraulic and pneumatic circuit diagrams principales pour dessiner des schémas de circuits
using graphical symbols drawn in accordance with hydrauliques et pneumatiques en utilisant des
ISO 1219-1. symboles graphiques conformes à l'ISO 1219-1.
This part of ISO 1219 also applies to circuit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.