SIST EN 15651-2:2010

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing

This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications. It covers glazing joints from 7° horizontal. Main areas of application are: glass to glass; glass to frame; glass to porous substrates. Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7°), organic glass (e.g. polycarbonate, PMMA, etc.).

Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für Verglasungen

Diese Europäische Norm legt Definitionen und Anforderungen an elastische Dichtstoffe für nicht tragende Anwendun¬gen zur Abdichtung von Verglasungen im Hochbau fest.
Diese Europäische Norm erfasst Verglasungsfugen ab einem Winkel von 7° zur Horizontalen. Die Hauptbereiche, in denen diese Fugendichtstoffe eingesetzt werden, sind:
-   Glas an Glas;
-   Glas an Rahmen;
-   Glas an porösen Trägermaterialien.
Anwendungen für Aquarien, tragende Verbindungen/Verglasungen, innere und äußere Abdichtungen von vorgefertigten Isolierglaseinheiten, horizontale Verglasungen (mit einer Neigung von weniger als 7°) und Ver-gla¬sungen aus organischem Material (z. B. Polycarbonat, PMMA usw.) fallen nicht in den Anwendungsbereich dieser Europäischen Norm.

Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 2 : Mastics pour vitrage

La présente Norme européenne spécifie des définitions et des exigences relatives aux mastics élastiques utilisés en vitrage dans la construction immobilière.
Elle traite des joints pour vitrages mis en oeuvre sur une pente supérieure à 7°. Les principaux domaines d’application sont :
-   verre sur verre ;
-   verre sur châssis ;
-   verre sur supports poreux.
Sont exclus les aquariums, les vitrages extérieurs collés, les mastics pour les vitrages isolants, les vitrages horizontaux (de pente inférieure à 7°), le verre organique (par exemple, polycarbonate, PMMA, etc.).

Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 2. del: Tesnilne mase za zasteklitev

Ta evropski standard opredeljuje definicije in zahteve za nekonstrukcijske elastične tesnilne mase, ki se uporabljajo za tesnjenje zasteklitev pri gradnji stavb. Zajema stike zasteklitve od 7° vodoravno. Glavna področja uporabe so: steklo na steklo; steklo na okvir; steklo na porozne substrate. Ne zajema akvarijev, konstrukcijskega povezovanja/zasteklitve, notranjih in zunanjih zatesnitev za izdelavo izoliranih zastekljenih enot, vodoravnih zasteklitev (pod 7°), organskega stekla (npr. polikarbonat, PMMA, itd.)

General Information

• Status: Withdrawn
• Public Enquiry End Date: 31-Oct-2007
• Publication Date: 07-Mar-2010
• Withdrawal Date: 04-Mar-2013
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Mar-2013
• Due Date: 27-Mar-2013
• Completion Date: 05-Mar-2013
• Ref Project: EN 15651-2:2010 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing

Relations

• Replaced By: SIST EN 15651-2:2013 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
• Effective Date: 01-Apr-2013
• Replaced By: SIST EN 15651-2:2013 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
• Effective Date: 08-Jun-2022
• Revised: SIST EN 15651-2:2013 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
• Effective Date: 12-Mar-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 2. del: Tesnilne mase za zasteklitevFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für VerglasungenMastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 2 : Mastics pour vitrageSealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-2:2010SIST EN 15651-2:2010en,de01-maj-2010SIST EN 15651-2:2010SLOVENSKI
STANDARD



SIST EN 15651-2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-2
March 2010 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 2 : Mastics pour vitrage
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für Verglasungen This European Standard was approved by CEN on 29 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-2:2010: ESIST EN 15651-2:2010



EN 15651-2:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .54Requirements .65Durability . 106Sampling . 117Evaluation of conformity . 118Marking and labelling . 11Annex A (informative)
Example on the frequency of tests for factory production control . 12Bibliography . 13 SIST EN 15651-2:2010



EN 15651-2:2010 (E) 3 Foreword This document (EN 15651-2:2010) has been prepared by Technical Committee CEN/TC 349 “Sealants for joints in building construction”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes an informative Annex A dealing with factory production control. This document is one part of the product European Standards within the framework series of EN 15651 on Sealants for non-structural use in joints in buildings and pedestrian walkways, as follows:  Part 1: Sealants for facade elements,  Part 2: Sealants for glazing (this document),  Part 3: Sealants for sanitary joints,  Part 4: Sealants for pedestrian walkways,  Part 5: Evaluation of conformity and marking. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15651-2:2010



EN 15651-2:2010 (E) 4 1 Scope This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications. It covers glazing joints from 7° horizontal. Main areas of application are:  glass to glass;  glass to frame;  glass to porous substrates. Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7°), organic glass (e.g. polycarbonate, PMMA, etc.). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13238, Reaction to fire tests for building products — Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests EN 15651-5, Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 5: Evaluation of conformity and marking EN 26927:1990, Building construction — Jointing products — Sealants — Vocabulary (ISO 6927:1981) EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 7389, Building construction — Jointing products — Determination of elastic recovery of sealants
(ISO 7389:2002) EN ISO 7390, Building construction — Jointing products — Determination of resistance to flow of sealants (ISO 7390:2003) EN ISO 8339, Building construction — Sealants — Determination of tensile properties (Extension to break) (ISO 8339:2005) EN ISO 8340, Building construction — Sealants — Determination of tensile properties at maintained extension (ISO 8340:2005) EN ISO 9046, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)
SIST EN 15651-2:2010



EN 15651-2:2010 (E) 5 EN ISO 9047, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) EN ISO 10563, Building construction — Sealants — Determination of change in mass and volume
(ISO 10563:2005) EN ISO 10590, Building construction — Sealants — Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) EN ISO 10591, Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) EN ISO 11358, Plastics — Thermogravimetry (TG) of polymers — General principles (ISO 11358:1997) EN ISO 11431, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) EN ISO 11432, Building construction — Sealants — Determination of resistance to compression
(ISO 11432:2005) EN ISO 11600, Building construction — Jointing products — Classification and requirements for sealants
(ISO 11600:2002) EN ISO 11925-2, Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test (ISO 11925-2:2002) ISO 13640, Building construction — Jointing products — Specifications for test substrates 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 26927:1990 and the following apply. 3.1 non-reactive sealants mainly physical drying mechanism, without significant change in the molecular weight of the main polymer 3.2 reactive sealants mainly curing by chemical reaction, with significant increase of the molecular weight of the main polymer 3.3 cure irreversible transformation of a sealant from a liquid or paste like state into a hardened or rubber like solid state 3.4 uncured/wet state of a sealant prior to the above transformation SIST EN 15651-2:2010



EN 15651-2:2010 (E) 6 4 Requirements 4.1 Identification requirements and test methods 4.1.1 Short description of the sealant The short description of the non-structural sealant for glazing elements shall include: brand name, type (general chemical family), opaque or translucent, waterborne or solvent based or solvent free, reactive or
non-reactive, and one or multi-component (e.g. neutral cure, reactive silicone and one component, etc.). The primer shall be stated for the substrate concerned if relevant (name, chemical type, etc.) 4.1.2 Thermogravimetric test The test shall be carried out in accordance with EN ISO 11358 on the uncured or wet sealant, between 35 °C to 900 °C, temperature slope 10 °C/min, non-oxidative condition (e.g. nitrogen). A single sample shall be used for this test. A single specimen may be tested and there shall be no significant difference between the reference curve and derivative (profile). In the case of multi-component sealant, each component shall be evaluated (if relevant). 4.1.3 Specific Gravity test The determination of the specific grav
...