Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing (ISO/DIS 15384:2025)

This document specifies methods of test and minimum performance requirements for personal protective clothing, designed to protect the wearer's body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This document covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels.
This document is not applicable to clothing for use in situations encountered in structural firefighting (EN 469 or ISO 11999-3), rescue (ISO 18639) or where a high level of infrared radiation is expected (ISO 15538 or EN 1486), nor does this document cover clothing to protect against chemical, biological, electrical or radiation hazards. This document does not provide protection against high mechanical risks such as for protection when using chain saws.

Schutzkleidung für die Feuerwehr - Laborprüfverfahren und Leistungsanforderungen für Schutzkleidung für die Brandbekämpfung im freien Gelände (ISO/DIS 15384:2025)

Habillement de protection pour sapeurs-pompiers - Méthodes d'essai en laboratoire et exigences de performance pour vêtements portés pendant la lutte contre les feux d'espaces naturels (ISO/DIS 15384:2025)

Le présent document spécifie des méthodes d'essai et des exigences minimales de performance relatives à l'habillement de protection individuelle conçu pour protéger le corps de l'utilisateur, à l'exception de la tête, des mains et des pieds, et portés pendant la lutte contre les feux d'espaces naturels et les activités connexes. Cet habillement n'est pas destiné à assurer une protection en cas d'encerclement par le feu. Le présent document s'applique à la conception générale du vêtement, au niveau minimal de performance des matériaux employés et aux méthodes d'essai permettant de déterminer ces niveaux.
Le présent document ne s'applique pas aux vêtements destinés à être utilisés dans le cadre de situations relevant de la lutte contre les incendies de structures (EN 469 ou ISO 11999‑3) ou des activités de sauvetage (ISO 18639), ou lorsqu'un niveau élevé de rayonnement infrarouge est envisagé (ISO 15538 ou EN 1486). Le présent document ne traite pas non plus de l'habillement de protection contre les dangers chimiques, biologiques, électriques et radiologiques. Le présent document ne couvre pas les protections contre les risques mécaniques élevés, telles que celles utilisées, par exemple, pour les travaux impliquant des scies-à-chaîne.

Zaščitna obleka za gasilce - Laboratorijske preskusne metode in zahtevane lastnosti gasilskih oblek za gašenje v naravi (ISO/DIS 15384:2025)

General Information

Status
Not Published
Public Enquiry End Date
29-Sep-2025
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
23-Jul-2025
Due Date
10-Dec-2025

Relations

Buy Standard

Draft
prEN ISO 15384:2025
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2025
Zaščitna obleka za gasilce - Laboratorijske preskusne metode in zahtevane
lastnosti gasilskih oblek za gašenje v naravi (ISO/DIS 15384:2025)
Protective clothing for firefighters - Laboratory test methods and performance
requirements for wildland firefighting clothing (ISO/DIS 15384:2025)
Schutzkleidung für die Feuerwehr - Laborprüfverfahren und Leistungsanforderungen für
Schutzkleidung für die Brandbekämpfung im freien Gelände (ISO/DIS 15384:2025)
Habillement de protection pour sapeurs-pompiers - Méthodes d'essai en laboratoire et
exigences de performance pour vêtements portés pendant la lutte contre les feux
d'espaces naturels (ISO/DIS 15384:2025)
Ta slovenski standard je istoveten z: prEN ISO 15384
ICS:
13.220.10 Gašenje požara Fire-fighting
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 15384
ISO/TC 94/SC 14
Protective clothing for
Secretariat: SA
firefighters — Laboratory test
Voting begins on:
methods and performance
2025-07-11
requirements for wildland
Voting terminates on:
firefighting clothing
2025-10-03
Habillement de protection pour sapeurs-pompiers — Méthodes
d'essai en laboratoire et exigences de performance pour
vêtements portés pendant la lutte contre les feux d'espaces
naturels
ICS: 13.340.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 15384:2025(en)
DRAFT
ISO/DIS 15384:2025(en)
International
Standard
ISO/DIS 15384
ISO/TC 94/SC 14
Protective clothing for
Secretariat: SA
firefighters — Laboratory test
Voting begins on:
methods and performance
requirements for wildland
Voting terminates on:
firefighting clothing
Habillement de protection pour sapeurs-pompiers — Méthodes
d'essai en laboratoire et exigences de performance pour
vêtements portés pendant la lutte contre les feux d'espaces
naturels
ICS: 13.340.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 15384:2025(en)
ii
ISO/DIS 15384:2025(en)
Contents  Page
Foreword .v
Introduction .vi
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 2
4  Clothing design . 4
4.1 General .4
4.2 Innocuousness .4
4.3 Collar .4
4.4 Protective coverall or protective suit .4
4.5 Pockets .5
4.6 Hardware . .5
4.7 Retroreflective and/or fluorescent materials .5
4.8 Sleeves .5
4.9 Trousers .5
5  Sampling and pretreatment . 5
5.1 General .5
5.2 Sampling .6
5.3 Pretreatment by cleaning .6
5.4 Conditioning.6
5.5 Cleaning Cycle Durability .6
6  Thermal requirements . 6
6.1 Flame spread .6
6.1.1 General .6
6.1.2 Surface ignition.7
6.1.3 Edge ignition .7
6.2 Heat transfer (radiation) .7
6.3 Heat resistance .8
6.3.1 Heat resistance of the sewing thread .8
6.3.2 Heat resistance of retroreflective/fluorescent materials .8
6.4 Whole garment flame engulfment (optional) .8
7  Mechanical requirements . 8
7.1 Tensile strength .8
7.2 Tear strength.8
7.3 Main seam strength .8
7.4 Abrasion resistance . . .9
8  Ergonomic and comfort requirements . 9
8.1 Thermal resistance .9
8.2 Water vapour resistance.9
9  General . 9
9.1 Dimensional change after washing and/or dry-cleaning .9
9.2 Retroreflective and/or fluorescent performance .9
9.3 Colour fastness .10
9.4 Summary of performance requirements .10
10  Marking and labelling .11
10.1 General .11
10.2 Label durability and legibility.11
10.3 Compliance marking requirements . 12
11  Information supplied by the manufacturer .12
Annex A (normative)  Uncertainty of measurement and determination of propert
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.