SIST EN 10213-4:1997

Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades

According to the general delivery conditions of EN 10213-1 this standard specifies the chemical and mechanical requirements to be met under specific inspection of austenic and austenitic-ferritic grades.

Technische Lieferbedingungen für Stahlguß für Druckbehälter - Teil 4: Austenitische und austenitisch-ferritische Stahlsorten

Entsprechend den allgemeinen technischen Lieferbedingungen nach EN 10213-1 legt diese Norm die bei spezifischer Prüfung einzuhaltenden chemischen und mechanischen Anforderungen für austenitische und austenitisch-ferritische Stahlsorten fest.

Conditions techniques de livraison de pieces moulées en acier pour service sous pression - Partie 4: Nuances d'aciers austénitiques et austéno-ferritiques

En accord avec les conditions générales de livraison de l'EN 10213-1, cette norme précise les caractéristiques chimiques et mécaniques requises qui doivent etre satisfaites lors d'un contrôle spécifique des nuances d'aciers austénitique et austéno-ferritique.

Tehnični dobavni pogoji za jeklene ulitke za tlačne posode - 4. del: Avstenitna in avstenitno-feritna jekla

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 25-Nov-2007
• ICS: 77.140.10 - Heat-treatable steels
• ICS: 77.140.30 - Steels for pressure purposes
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-Nov-2007
• Due Date: 16-Dec-2007
• Completion Date: 26-Nov-2007
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10213-4:1995 - Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades

Relations

• Replaced By: SIST EN 10213:2008 - Steel castings for pressure purposes
• Effective Date: 01-Jan-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10213-4:1997
01-december-1997
7HKQLþQLGREDYQLSRJRML]DMHNOHQHXOLWNH]DWODþQHSRVRGHGHO$YVWHQLWQDLQ
DYVWHQLWQRIHULWQDMHNOD
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic
and austenitic-ferritic steel grades
Technische Lieferbedingungen für Stahlguß für Druckbehälter - Teil 4: Austenitische und
austenitisch-ferritische Stahlsorten
Conditions techniques de livraison de pieces moulées e
...