EN 10213:2007

Steel castings for pressure purposes

This European Standard applies to steel castings for pressure containing parts. It includes materials which are used for the manufacture of components, for pressure equipment.
This European Standard relates to castings characterised by their chemical composition (see Table 2) and mechanical properties (see Tables 3 to 6).
In cases where castings are joined by welding by the founder, this European Standard applies.
In cases where castings are welded:
-   to wrought products (plates, tubes, forgings), or
-   by non founders,
this European Standard does not apply.
NOTE   For this harmonised supporting standard for materials, presumption of conformity to the Essential Requirements of the Directive is limited to technical data of the material in the standard and does not presume adequacy of the material to specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the Essential Requirements of the Pressure Equipment Directive (PED) are satisfied.

Stahlguss für Druckbehälter

Pièces moulées en acier pour service sous pression

Jekleni ulitki za tlačne posode

General Information

• Status: Withdrawn
• Publication Date: 06-Nov-2007
• Withdrawal Date: 14-Jun-2016
• ICS: 77.140.30 - Steels for pressure purposes
• ICS: 77.140.80 - Iron and steel castings
• Technical Committee: ECISS/TC 111 - Steel castings and forgings
• Drafting Committee: ECISS/TC 111 - Steel castings and forgings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Jun-2016
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10213:2008 - Steel castings for pressure purposes

Relations

• Replaces: EN 10213-2:1995 - Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
• Effective Date: 22-Dec-2008
• Replaces: EN 10213-1:1995 - Technical delivery conditions for steel castings for pressure purposes - Part 1: General
• Effective Date: 22-Dec-2008
• Replaces: EN 10213-4:1995 - Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades
• Effective Date: 22-Dec-2008
• Replaces: EN 10213-3:1995 - Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures
• Effective Date: 22-Dec-2008
• Merged Into: EN 10213:2007+A1:2016 - Steel castings for pressure purposes
• Effective Date: 18-Jan-2023
• Amended By: EN 10213:2007/FprA1 - Steel castings for pressure purposes
• Effective Date: 19-Dec-2009
• Corrected By: EN 10213:2007/AC:2008 - Steel castings for pressure purposes
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel castings for pressure purposesPieces moulées en acier pour service sous pressionStahlguss für DruckbehälterTa slovenski standard je istoveten z:EN 10213:2007SIST EN 10213:2008en,fr,de77.140.80Železni in jekleni ulitkiIron and steel castings77.140.30Jekla za uporabo pod tlakomSteels for pressure purposesICS:SIST EN 10213-3:1997SIST EN 10213-4:1997SIST EN 10213-1:1997SIST EN 10213-2:19971DGRPHãþDSLOVENSKI
STANDARDSIST EN 10213:200801-januar-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10213November 2007ICS 77.140.30Supersedes EN 10213-1:1995, EN 10213-2:1995, EN10213-3:1995, EN 10213-4:1995
English VersionSteel castings for pressure purposesPièces moulées en acier pour service sous pressionStahlguss für DruckbehälterThis European Standard was approved by CEN on 30 September 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10213:2007: E



EN 10213:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 v 3 Terms and definitions.6 4 Information to be supplied by the purchaser.6 ” 4.1 Mandatory information.6 v 4.2 Optional information.6 5 Designation.6 6 Manufacture.7 6.1 Manufacturing process.7 6.2 Welding operations.7 v 6.3 Further processing.7 7 Requirements.7 v 7.1 General.7 7.2 Materials.7 v 7.3 Casting.8 ””7.4 Corrosion behaviour.
...