SIST EN 10213-3:1997

Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures

In accordance to the general delivery condiions of EN 10213-1 this standard specifies the chemcal and mechanical requirements to be met under specific inspection of steel grades for use at low temperatures.

Technische Lieferbedingungen für Stahlguß für Druckbehälter - Teil 3: Stahlsorten für die Verwendung bei tiefen Temperaturen

Entsprechend den allgemeinen technischen Lieferbedingungen nach EN 10213-1 legt diese Norm die bei spezifischer Prüfung einzuhaltenden chemischen und mechanischen Anforderungen der Stahlsorten für die Verwendung bei tiefen Temperaturen fest.

Conditions techniques de livraison des pieces moulées en acier pour service sous pression - Partie 3: Nuances d'acier pour utilisation a basses températures

En accord avec les conditions générales de livraison de l'EN 10213-1, cette norme précise les caractéristiques chimiques et mécaniques requises qui doivent etre satisfaites lors d'un contrôle spécifique des nuances d'acier destinées a etre utilisées a basses tempéraures.

Tehnični dobavni pogoji za jeklene ulitke za tlačne posode - 3. del: Vrste jekel za uporabo pri nizkih temperaturah

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 25-Nov-2007
• ICS: 77.140.10 - Heat-treatable steels
• ICS: 77.140.30 - Steels for pressure purposes
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-Nov-2007
• Due Date: 16-Dec-2007
• Completion Date: 26-Nov-2007
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10213-3:1995 - Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures

Relations

• Replaced By: SIST EN 10213:2008 - Steel castings for pressure purposes
• Effective Date: 01-Jan-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10213-3:1997
01-december-1997
7HKQLþQLGREDYQLSRJRML]DMHNOHQHXOLWNH]DWODþQHSRVRGHGHO9UVWHMHNHO]D
XSRUDERSULQL]NLKWHPSHUDWXUDK
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel
grades for use at low temperatures
Technische Lieferbedingungen für Stahlguß für Druckbehälter - Teil 3: Stahlsorten für die
Verwendung bei tiefen Temperaturen
Conditions techniques de livraison des pieces moulées
...