Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings

This part of this European Standard specifies the requirements for mass, other properties and testing of tin coatings on steel wire and steel wire products of round or other cross section.

Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil 4: Überzüge aus Zinn

Dieser Teil dieser Europäische Norm legt die Anforderungen an Masse, andere Eigenschaften und Prüfung von Zinnüberzügen auf Stahldraht und Staldrahterzeugnissen mit rundem oder anderem Querschnitt fest.

Fils et produits tréfilés en acier - Revetements métalliques non ferreux sur fils d'acier - Partie 4: Revetements d'étain

Domaine d'application
La présente partie de la présente norme européenne spécifie les exigences en matiere de masse, des autres caractéristiques et d'essai de revetements d'étain sur fils en acier et produits dérivés de section circulaire ou autre.

Jeklena žica in žični izdelki - Neželezne kovinske prevleke na jekleni žici - 4. del: Kositrove prevleke

General Information

Status
Published
Publication Date
31-Aug-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002

Buy Standard

Standard
EN 10244-4:2002
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil 4: Überzüge aus ZinnFils et produits tréfilés en acier - Revetements métalliques non ferreux sur fils d'acier - Partie 4: Revetements d'étainSteel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN 10244-4:2001SIST EN 10244-4:2002en01-september-2002SIST EN 10244-4:2002SLOVENSKI
STANDARD



SIST EN 10244-4:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10244-4March 2001ICS 25.220.40; 77.140.70English versionSteel wire and wire products - Non-ferrous metallic coatings onsteel wire - Part 4: Tin coatingsFils et produits tréfilés en acier - Revêtements métalliquesnon ferreux sur fils d'acier - Partie 4: Revêtements d'étainStahldraht und Drahterzeugnisse - Überzüge ausNichteisenmetall auf Stahldraht - Teil 4: Überzüge aus ZinnThis European Standard was approved by CEN on 21 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10244-4:2001 ESIST EN 10244-4:2002



Page 2EN 10244-4:2001ContentsPageForeword.31Scope.42Normative reference.43Term and definition.44Requirements relating to coating.44.1Material.44.2Mass of coating.44.3General requirements.44.4Porosity.55Test conditions.55.1Samples.55.1.1General.55.1.2Length of samples.55.2Determination of mass of coating.55.2.1General.55.2.2Procedure.65.2.3Calculation of mass of coating.65.3Porosity.65.4Adherence test.7SIST EN 10244-4:2002



Page 3EN 10244-4:2001ForewordThis European Standard has been prepared by Technical Committee ECISS/TC 30 "Steel wires", thesecretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by September 2001, and conflicting national standardsshall be with
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.