iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13236:2001

(Main)

Safety requirements for superabrasives

Safety requirements for superabrasives

This standard comprises safety requirements for the construction and testing by the manufacturer of all superabrasives (grinding wheels, cutting-off wheels, diamond wire, mounted points and other superabrasives) which are manufactured or repaired after the date of issue of the standard. The Standard does not include dressing tools including rotary truers nor any non-rotating Superabrasive tool.

Sicherheitsanforderungen für Schleifwerkzeuge mit Diamant oder Bornitrid

Diese Norm enthält Sicherheitsanforderungen für Konstruktion und Prüfung für Schleifkörper, Trennschleifscheiben, Sägeseile, Schleifstifte und sonstige Schleifwerkzeuge mit Diamant oder Bornitrid durch den Hersteller, die nach der Veröffentlichung dieser Norm hergestellt oder instandgesetzt werden. Sie enthält keine Sicherheitsanforderungen für rotierende Abrichtwerkzeuge, Handfeilen und andere nicht rotierende Schleifwerkzeuge.

Prescriptions de sécurité pour les produits superabrasifs

La présente norme énonce les prescriptions de sécurité que doivent respecter les constructeurs pour la fabrication et les essais de tous les produits superabrasifs (meules, meules a tronçonner, fils diamantés, meules sur tige et autres outils superabrasifs) fabriqués ou réparés apres la date de publication de la norme. La présente norme ne traite pas des outils a dresser, y compris les outils a dresser rotatifs ou tout outil non rotatif superabrasif.

Safety requirements for superabrasives

General Information

Status
Withdrawn
Publication Date
31-May-2001
Withdrawal Date
09-Jan-2011
ICS
25.100.70 - Abrasives
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-Jan-2011
Due Date
02-Feb-2011
Completion Date
10-Jan-2011
Directive
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Ref Project
EN 13236:2001 - Safety requirements for superabrasives

Relations

Replaced By
SIST EN 13236:2011 - Safety requirements for superabrasive products
Effective Date
01-Feb-2011
Amended By
SIST EN 13236:2001/A1:2005 - Safety requirements for superabrasives
Effective Date
22-Dec-2008
Amended By
SIST EN 13236:2001/A1:2005 - Safety requirements for superabrasives
Effective Date
08-Jun-2022
Replaced By
SIST EN 13236:2011 - Safety requirements for superabrasive products
Effective Date
08-Jun-2022

Buy Standard

EN 13236:2001EN 13236:2001
PreviousNext
Standard
EN 13236:2001
English language
83 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for superabrasivesSicherheitsanforderungen für Schleifwerkzeuge mit Diamant oder BornitridPrescriptions de sécurité pour les produits superabrasifsSafety requirements for superabrasives25.100.70BrusivaAbrasivesICS:Ta slovenski standard je istoveten z:EN 13236:2001SIST EN 13236:2001en01-junij-2001SIST EN 13236:2001SLOVENSKI
STANDARD



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN 13236:2001



SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19432-1:2020(Main)
Building construction machinery and equipment - Portable, hand-held, internal-combustion-engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)
EN ISO 19432-1:2020

EN-ISO 19432-1 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on and driven by a spindle shaft where the top of the wheel rotates away from the operator (see Figure 1).This document deals with all significant hazards, hazardous situations or hazardous events significant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. See Annex F for a list of significant hazards.This document specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines.Cut-off wheel specifications are not considered in this document. Cut-off wheels are deemed to comply to existing cut-off wheel standards.All through the document, portable, hand-held, internal combustion engine-driven cut-off machines are called “cut-off machines”.This document is not applicable to machines manufactured before the date of its publication.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1083-2:1997(Main)
Power-driven brushes - Part 2: Safety requirements
EN 1083-2:1997

This Part of this European Standard specifies safety requirements for power- driven brushes. Excluded from this standard are power-driven brushes made for a specialized application and designed exclusively for that purpose (such as those given in 3.10 to 3.21 prEN 1083-1).

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1083-1:1997(Main)
Power-driven brushes - Part 1: Definitions and nomenclature
EN 1083-1:1997

This part of this European Standard defines terms used to describe power- driven brushes and gives the nomenclature of power-driven brush products. This standard also provides the necessary definitions for the purpose of other European Standards for power-driven brushes. It does not include brushes for vehicle washing plants, vacuum cleaners, floor cleaning machines, gutter and street cleaning brushes, dental brushes, brushes with tapered bores nor brushes designed for special applications.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12413:2007/kprA1:2010(Amendment)
Safety requirements for bonded abrasive products
EN 12413:2007/FprA1

Amendment:
During revision of EN 12413:1999 an editorial simplification of the table with the scope of inspection (EN 12413:1999, Table 14) had been decided (see meeting report, document CEN/TC 143/WG 2 N 132). However this simplification led to a tightening of the scope of inspection for "all other abrasive products" in EN 12413:2007, Table 7 which was not covered by the compilation of comments table (document CEN/TC 143/WG 2 N 133) and no technical reason can be seen for this tightening of requirements.
Scope of EN 12413:2007:
This standard is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This standard also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4 of this standard.
This standard does not apply to superabrasives and coated abrasive products.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19432-1:2020(Main)
Building construction machinery and equipment - Portable, hand-held, internal-combustion-engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)
EN ISO 19432-1:2020

EN-ISO 19432-1 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on and driven by a spindle shaft where the top of the wheel rotates away from the operator (see Figure 1).This document deals with all significant hazards, hazardous situations or hazardous events significant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. See Annex F for a list of significant hazards.This document specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines.Cut-off wheel specifications are not considered in this document. Cut-off wheels are deemed to comply to existing cut-off wheel standards.All through the document, portable, hand-held, internal combustion engine-driven cut-off machines are called “cut-off machines”.This document is not applicable to machines manufactured before the date of its publication.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12413:2020(Main)
Safety requirements for bonded abrasive products
EN 12413:2019

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive products.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13236:2019(Main)
Safety requirements for superabrasive products
EN 13236:2019

This European Standard only applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This European Standard specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products.
This European Standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4.
This European Standard does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers nor any non-rotating superabrasive products.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13743:2017(Main)
Safety requirements for coated abrasive products
EN 13743:2017

(As in the existing standard EN 13743): This European Standard is applicable to the following coated abrasive products: flap wheels, flap discs, vulcanised fibre discs and spindle mounted flap wheels. It also applies to back-up pads for vulcanised fibre discs.
This European Standard specifies requirements and/or measures for removal or reduction of hazards resulting from the design and application of the coated abrasive products and clamping devices.
This European Standard also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4 of this standard.
This European Standard does not apply to non-woven web abrasive products, bonded abrasive products and superabrasive products.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6103:2015(Main)
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014)
EN ISO 6103:2014

This International Standard specifies the maximum permissible values of unbalances for bonded
abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the
as-delivered condition.
It also specifies the method for measuring the unbalance and the practical method for testing whether
a grinding wheel is acceptable or not.
This International Standard is applicable to bonded abrasive wheels in the as-delivered condition.
This International Standard is not applicable to
— diamond, cubic boron nitride or natural stone grinding wheels, or
— centreless control wheels, lapping and disc wheels, ball wheels or glass grinding wheels.
NOTE 1 The values given refer to the grinding wheel itself, independent of any unbalance which may exist in
the balancing arbor or in the means of fastening it to this arbor. These various elements, together with the flanges
or hub-flanges, are assumed to be balanced, homogeneous and free from geometrical defects.
NOTE 2 The effects of unbalance are basically
— additional stresses on the arbor, the machine and its mounting,
— excessive wear of the bearings,
— vibration prejudicial to the quality of machining and increased internal stresses in the grinding wheel, and
increased operator fatigue.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1083-1:1997(Main)
Power-driven brushes - Part 1: Definitions and nomenclature
EN 1083-1:1997

This part of this European Standard defines terms used to describe power- driven brushes and gives the nomenclature of power-driven brush products. This standard also provides the necessary definitions for the purpose of other European Standards for power-driven brushes. It does not include brushes for vehicle washing plants, vacuum cleaners, floor cleaning machines, gutter and street cleaning brushes, dental brushes, brushes with tapered bores nor brushes designed for special applications.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day