Switches for appliances - Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:2010)

This standard applies to change-over selectors (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. This second edition cancels and replaces the first edition published in 1994 and constitutes a technical revision. The main changes from the first edition are as follows: - scope; - abnormal operation and fault conditions for electronic switches; - components for electronic switches; - EMC requirements.

Geräteschalter - Teil 2-5: Besondere Anforderungen an Wahlschalter (IEC 61058-2-5:2010)

Interrupteurs pour appareils - Partie 2-5: Règles particulières pour les sélecteurs (CEI 61058-2-5:2010)

La CEI 61058-2-5:2010 s'applique aux sélecteurs (mécaniques ou électroniques) pour appareils man uvrés à la main, au pied ou par d'autres activités humaines, pour faire fonctionner ou commander des appareils électriques et autres matériels pour usage domestique et analogue de tension assignée ne dépassant pas 480 V et de courant assigné ne dépassant pas 63 A. Cette deuxième édition annule et remplace la première édition parue en 1994 et constitue une révision technique. Les changements principaux par rapport à la première édition sont les suivants: - domaine d'application; - fonctionnement anormal et conditions de défaut pour les interrupteurs électroniques; - composants pour interrupteurs électroniques; - exigences de compatibilité électromagnétique.

Stikala za aparate - 2-5. del: Posebne zahteve za predizbiralnike (IEC 61058-2-5:2010)

Ta mednarodni standard se uporablja s predizbiralniki (mehanskimi ali elektronskimi) za aparate, ki se aktivirajo z roko, nogo ali drugo človeško aktivnostjo, za delovanje ali nadzor električnih aparatov in druge opreme za gospodinjske ali podobne namene z nazivno napetostjo, ki ne presega 480 V, in nazivnim tokom, ki ne presega 63 A. Ta druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 1994, in pomeni tehnično revizijo. Glavne spremembe iz prve izdaje so naslednje: - obseg uporabe; - nenormalno delovanje in stanja okvare za elektronska stikala; - komponente za elektronska stikala; - zahteve za elektromagnetno združljivost.

General Information

Status
Published
Publication Date
06-Apr-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Mar-2011
Due Date
28-May-2011
Completion Date
07-Apr-2011

RELATIONS

Buy Standard

Standard
SIST EN 61058-2-5:2011
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 61058-2-5:2011
01-maj-2011
1DGRPHãþD
SIST EN 61058-2-5:1999/A11:2004
Stikala za aparate - 2-5. del: Posebne zahteve za predizbiralnike (IEC 61058-2-
5:2010)

Switches for appliances - Part 2-5: Particular requirements for change-over selectors

(IEC 61058-2-5:2010)
Geräteschalter - Teil 2-5: Besondere Anforderungen an Wahlschalter (IEC 61058-2-
5:2010)

Interrupteurs pour appareils - Partie 2-5: Règles particulières pour les sélecteurs (CEI

61058-2-5:2010)
Ta slovenski standard je istoveten z: EN 61058-2-5:2011
ICS:
29.120.40 Stikala Switches
SIST EN 61058-2-5:2011 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61058-2-5:2011
---------------------- Page: 2 ----------------------
SIST EN 61058-2-5:2011
EUROPEAN STANDARD
EN 61058-2-5
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 29.120.40 Supersedes EN 61058-2-5:1994 + A11:2002
English version
Switches for appliances -
Part 2-5: Particular requirements for change-over selectors
(IEC 61058-2-5:2010)
Interrupteurs pour appareils - Geräteschalter -
Partie 2-5: Règles particulières pour les Teil 2-5: Besondere Anforderungen an
sélecteurs Wahlschalter
(CEI 61058-2-5:2010) (IEC 61058-2-5:2010)

This European Standard was approved by CENELEC on 2011-01-03. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61058-2-5:2011 E
---------------------- Page: 3 ----------------------
SIST EN 61058-2-5:2011
EN 61058-2-5:2011 - 2 -
Foreword

The text of document 23J/327/CDV, future edition 2 of IEC 61058-2-5, prepared by SC 23J, Switches for

appliances, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and

was approved by CENELEC as EN 61058-2-5 on 2011-01-03.
This European Standard supersedes EN 61058-2-5:1994 + A11:2002.
The main changes from EN 61058-2-5:1994 + A11:2002 are as follows:
– scope;
– abnormal operation and fault conditions for electronic switches;
– components for electronic switches;
– EMC requirements.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent

rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-10-03
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-01-03
with the EN have to be withdrawn

This standard is to be read in conjunction with the EN 61058-1:2002, Switches for appliances – Part 1:

General requirements, and its amendment 2 (2008).

This Part 2-5 supplements or modifies the corresponding clauses in EN 61058-1, so as to convert that

publication into the EN standard: Particular requirements for change-over selectors.

When a particular subclause of Part 1 is not mentioned in this Part 2-5, that subclause applies as far as

reasonable. Where this standard states “addition”, “modification” or “replacement”, the relevant text of

Part 1 is to be adapted accordingly.
In this standard:
1) the following print types are used:
- requirements proper: in roman type;
- test specifications: in italic type;
- notes/explanatory matters: in small roman type.

2) subclauses, notes, figures and tables which are additional to those in Part 1 are numbered starting

from 101. Annexes which are additional to those in Part 1 are lettered AA, BB, etc.

__________
---------------------- Page: 4 ----------------------
SIST EN 61058-2-5:2011
- 3 - EN 61058-2-5:2011
Endorsement notice

The text of the International Standard IEC 61058-2-5:2010 was approved by CENELEC as a European

Standard without any modification.
__________
---------------------- Page: 5 ----------------------
SIST EN 61058-2-5:2011
---------------------- Page: 6 ----------------------
SIST EN 61058-2-5:2011
IEC 61058-2-5
Edition 2.0 2010-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Switches for appliances –
Part 2-5: Particular requirements for change-over selectors
Interrupteurs pour appareils –
Partie 2-5: Règles particulières pour les sélecteurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX
ICS 29.120.40 ISBN 978-2-88912-262-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61058-2-5:2011
– 2 – 61058-2-5 Ó IEC:2010
CONTENTS

FOREW ORD .................................................................................................................. 3

1 Sc o pe ...................................................................................................................... 5

2 Normative references ................................................................................................ 5

3 Definitions ............................................................................................................... 5

4 General requirements ............................................................................................... 6

5 General notes on tests .............................................................................................. 6

6 Rating ..................................................................................................................... 6

7 Classification ........................................................................................................... 6

8 Marking and documentation ....................................................................................... 6

9 Protection against electric shock ................................................................................ 7

10 Provision for earthing ................................................................................................ 7

11 Terminals and terminations ........................................................................................ 7

12 Construction ............................................................................................................ 7

13 Mechanism .............................................................................................................. 8

14 Protection against solid foreign objects, ingress of, water, and humid conditions ............. 8

15 Insulation resistance and dielectric strength ................................................................ 8

16 Heating.................................................................................................................... 8

17 Endurance ............................................................................................................... 8

18 Mechanical strength .................................................................................................. 9

19 Screws, current-carrying parts and connections ........................................................... 9

20 Clearances, creepage distances, solid insulation and coatings of rigid printed

board assemblies ..................................................................................................... 9

21 Resistance to heat and fire ........................................................................................ 9

22 Resistance to rusting ................................................................................................ 9

23 Abnormal operation and fault conditions for electronic switches..................................... 9

24 Components for electronic switches ............................................................................ 9

25 EMC requirements .................................................................................................. 10

Table 101 – Change-over selector information ................................................................... 7

---------------------- Page: 8 ----------------------
SIST EN 61058-2-5:2011
61058-2-5 Ó IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SWITCHES FOR APPLIANCES –
Part 2-5: Particular requirements for change-over selectors
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not r

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.