kSIST FprEN IEC 60598-2-24:2026/oprAA:2026

• Status: Not Published
• Public Enquiry End Date: 29-Sep-2026
• ICS: 29.140.40 - Luminaires
• Technical Committee: STV - Steklo, svetloba in razsvetljava v gradbeništvu
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 28-Jul-2026
• Due Date: 15-Dec-2026
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: FprEN IEC 60598-2-24:2026/prAA:2026 - Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

• Amends: kSIST FprEN IEC 60598-2-24:2026 - Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures
• Effective Date: 19-Nov-2024

kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 is a SIST draft amendment for luminaires with limited surface temperatures. It modifies FprEN IEC 60598-2-24:2026 and is prepared by the CENELEC technical committee CLC/TC 34, Lighting. For engineers and conformity assessors, it shows how this luminaire part connects with EN IEC 60598-1 and with the safety objectives of Directive 2014/35/EU.

What does kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 specify?

kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 specifies a draft European amendment for luminaires with limited surface temperatures. It is read together with EN IEC 60598-1, and its annexes link the text to the legal framework for low-voltage electrical equipment.

The document is organized around a European foreword, Annex ZA on normative references, and Annex ZZ on the relationship with Directive 2014/35/EU. The foreword also states that the draft is under enquiry and gives the proposed national implementation timetable.

Annex	What it covers
ZA	Normative references to international publications and the corresponding European publications
ZZ	Relationship between this European standard and the safety objectives of Directive 2014/35/EU

What are the key requirements of kSIST FprEN IEC 60598-2-24:2026/oprAA:2026?

The most important technical point in kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 is that it does not stand alone. Annex ZZ shows that the amendment is intended to be used with the referenced requirements of Part 1, so product assessment must combine the particular Part 2-24 text with the general luminaire requirements in EN IEC 60598-1.

The document is tied to the Low Voltage Directive

Annex ZZ says the standard is intended to support Directive 2014/35/EU. In practice, that matters because a manufacturer or test body can use the cited clauses as one route to show that a luminaire meets the directive's safety objectives.

Annex ZZ maps clauses to safety objectives

Table ZZ.1 gives the correspondence between the standard and Annex I of Directive 2014/35/EU. The table links multiple safety objectives to clauses in this document, and several entries say they must be used together with Part 1 or with other clauses in this amendment. That means compliance work has to follow the cross-references, not just one clause in isolation.

Presumption of conformity depends on publication status

Annex ZZ states that, once the standard is cited in the Official Journal of the European Union under Directive 2014/35/EU, compliance with the normative clauses listed in Table ZZ.1 gives a presumption of conformity within the scope of the standard. For users, that means the legal value of the document depends on the current OJEU citation.

The document also flags wider regulatory use

The foreword warns that other Union legislation may apply to the products covered. In practice, a luminaire project may still need additional checks beyond this amendment and Part 1, depending on the market and the product configuration.

What terms does kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 define?

• CENELEC - The European Committee for Electrotechnical Standardization, which publishes this draft amendment.
• CLC/TC 34 - The CENELEC technical committee called "Lighting" that prepared the document.
• Annex ZA - The annex that lists the normative references and their European equivalents.
• Annex ZZ - The informative annex that explains the link to Directive 2014/35/EU.
• Directive 2014/35/EU - The EU low-voltage directive for electrical equipment within certain voltage limits.
• Presumption of conformity - The legal effect described in Annex ZZ when the cited clauses are met and the standard is cited in the Official Journal of the European Union.

Who uses kSIST FprEN IEC 60598-2-24:2026/oprAA:2026?

kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 is used by manufacturers of luminaires with limited surface temperatures, by test laboratories, and by conformity assessment teams checking electrical safety evidence. It is also relevant to design engineers, quality managers, importers, and specifiers who need to know which clauses support assessment against Directive 2014/35/EU.

What changed in kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 from the previous edition?

kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 is a draft amendment that modifies FprEN IEC 60598-2-24:2026.

Which standards are used with kSIST FprEN IEC 60598-2-24:2026/oprAA:2026?

Annex ZA names the standards that are used with this document:

• IEC 60598-1:2024 / EN IEC 60598-1:2024+A11:2024 - The general requirements and tests for luminaires, which this Part 2-24 amendment is read with.
• IEC 61347-1 / EN IEC 61347-1:2024 - The general safety requirements for controlgear for electric light sources, included as a normative reference in this document.

What does the kSIST FprEN IEC 60598-2-24:2026/oprAA:2026 document contain?

The document contains a European foreword, Annex ZA, and Annex ZZ. The foreword identifies the drafting committee, the enquiry stage, the proposed national announcement, implementation and withdrawal dates, and the multilingual official versions.

Annex ZA provides the normative-reference bridge from IEC publications to their European publications. Annex ZZ provides the conformity relationship to Directive 2014/35/EU and includes Table ZZ.1, which maps safety objectives to clauses in this amendment. For users, that table is the main aid for compliance mapping and for checking which clauses support a Low Voltage Directive assessment.

SLOVENSKI STANDARD
kSIST FprEN IEC 60598-2-
24:2026/oprAA:2026
01-september-2026
Svetilke - 2-24. del: Posebne zahteve - Svetilke z omejenimi površinskimi
temperaturami
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface
temperatures
Leuchten - Teil 2-24: Besondere Anforderungen - Leuchten mit begrenzter
Oberflächentemperatur
Luminaires - Partie 2-24: Exigences particulières - Luminaires avec surfaces à
températures limitées
Ta slovenski standard je istoveten z: FprEN IEC 60598-2-24:2026/prAA:2026
ICS:
29.140.40 Svetila Luminaires
kSIST FprEN IEC 60598-2- en,fr,de
24:2026/oprAA:2026
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
FprEN IEC 60598-2-24:2026
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
July 2026
ICS 29.140.40 -
English Version
Luminaires - Part 2-24: Particular requirements - Luminaires with
limited surface temperatures
Luminaires - Partie 2-24: Exigences particulières - Leuchten - Teil 2-24: Besondere Anforderungen - Leuchten
Luminaires avec surfaces à températures limitées mit begrenzter Oberflächentemperatur
This draft amendment prAA, if approved, will modify the European Standard FprEN IEC 60598-2-24:2026; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-10-16.

It has been drawn up by CLC/TC 34.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80967 Ref. No. FprEN IEC 60598-2-24:2026/prAA:2026 E

1 European foreword
2 This document (FprEN IEC 60598-2-24:2026/prAA:2026) has been prepared by CLC/TC 34 “Lighting”.
3 This document is currently submitted to the Enquiry.
4 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
5 This document is read in conjunction with EN IEC 60598-1.
6 This document has been prepared under a standardization request addressed to CENELEC by the European
7 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
8 Member St
...