oSIST prEN IEC 60684-2:2024
(Main)Flexible insulating sleeving - Part 2: Methods of test
Flexible insulating sleeving - Part 2: Methods of test
Isolierschläuche - Teil 2: Prüfverfahren
Gaines isolantes souples - Partie 2: Méthodes d'essai
Gibke izolacijske cevi - 2. del: Preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Gibke izolacijske cevi - 2. del: Preskusne metode
Flexible insulating sleeving - Part 2: Methods of test
Isolierschläuche - Teil 2: Prüfverfahren
Gaines isolantes souples - Partie 2: Méthodes d'essai
Ta slovenski standard je istoveten z: prEN IEC 60684-2:2024
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
15/1034/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60684-2 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-07-26 2024-10-18
SUPERSEDES DOCUMENTS:
15/958/CD, 15/966A/CC
IEC TC 15 : SOLID ELECTRICAL INSULATING MATERIALS
SECRETARIAT: SECRETARY:
United States of America Mr Solomon Chiang
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 112
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses.
(See AC/22/2007 or NEW GUIDANCE DOC).
TITLE:
Flexible insulating sleeving – Part 2: Methods of test
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
TC15 WG5 has reviewed CC from CD and already provided comment resolution in the revised CC. This is the CDV.
Solomon TC 15 Secretary 04/06/2024
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
15/1034/CDV – 2 – IEC CDV 60684-2 © IEC 2024
CONTENTS
1 General . 8
2 Test conditions . 10
3 Measurements of bore, wall thickness and concentricity . 10
4 Density . 13
5 Resistance to splitting after heating . 13
6 Heat shock (resistance to heat) . 13
7 Resistance to soldering heat . 14
8 Loss in mass on heating of uncoated textile glass sleeving. 15
9 Longitudinal change . 15
10 Deformation under load (resistance to pressure at elevated temperature) . 16
11 Thermal stability of PVC sleeving . 18
12 Volatile content of silicone sleeving . 19
13 Bending after heating . 19
14 Bending at low temperature . 20
15 Brittleness temperature . 21
16 Dimensional stability on storage (applicable to heat-shrinkable sleeving only) . 21
17 Hydrolysis of coating . 21
18 Flexibility (extruded sleeving only) . 22
19 Tensile strength, tensile stress at 100 % elongation, elongation at break and
secant modulus at 2 % elongation . 22
20 Fraying resistance test . 26
21 Breakdown voltage . 27
22 Insulation resistance. 29
23 Volume resistivity for insulating material . 30
24 Permittivity and dissipation factor . 31
25 Resistance to tracking . 32
26 Flame propagation tests . 32
27 Oxygen index . 36
28 Transparency . 36
29 Ionic impurities test . 36
30 Silver staining test . 37
31 Electrolytic corrosion resistance . 37
32 Corrosion resistance (tensile and elongation) . 38
33 Copper corrosion (presence of corrosive volatiles) . 38
34 Colour fastness to light . 39
35 Resistance to ozone . 40
36 Resistance to selected fluids . 40
37 Thermal endurance . 41
38 Mass per unit length . 41
39 Heat ageing . 42
40 Water absorption . 43
41 Restricted shrinkage (applicable to heat-shrinkable sleeving only). 43
IEC CDV 60684-2 © IEC 2024 – 3 – 15/1034/CDV
42 Colour stability to heat . 44
43 Smoke index. 44
44 Toxicity index . 49
45 Halogen content . 54
46 Acid gas generation . 56
47 Hot elongation and hot set . 56
48 Tension set (applicable to elastomeric sleeving only) . 57
49 Tear propagation (applicable to elastomeric sleeving only) . 57
50 Long term heat ageing (3 000 h) . 58
51 Dynamic shear at ambient temperature . 58
52 Dynamic shear at elevated temperature . 59
53 Dynamic shear after heat shock and heat ageing . 59
54 Rolling drum peel to aluminium . 60
55 Aluminium rod dynamic shear . 61
56 Sealing . 62
57 Adhesive T peel strength of two bonded heat-shrinkable substrates . 63
58 Circumferential extension . 64
59 Voltage proof . 64
60 Thermal shock . 65
61 Abrasion Resistance . 66
62 Volume Resistivity for Semi-conducting materials . 66
63 Outgassing . 68
64 Resistance to weathering . 68
Bibliography . 90
Figure 1 – Specimen for test resistance to soldering heat . 69
Figure 2 – Examples of sleeving after being subjected to test for resistance to
soldering heat . 69
Figure 3 – Arrangement for the test for resistance to pressure at elevated temperature
(Method A) . 70
Figure 4 – Arrangement for deformation under load (Method B) . 71
Figure 5 – Dumb-bell specimen for tensile strength test (ISO 37 Type2) . 72
Figure 6 – Dumb-bell specimen for tensile strength test (ISO 37 Type 1) . 72
Figure 7 – Sketch of fray test arrangement . 73
Figure 8 – Specimen for insulation resistance test . 74
Figure 9 – Standard propane burner for flame propagation test (sectional view) . 75
Figure 10 – Flame propagation test – Method A . 76
Figure 11 – Flame propagation test – Method B . 77
Figure 12 – Flame propagation test – Method C . 78
Figure 13 – Mandrel for restricted shrinkage test . 79
Figure 14 – Schematic details of burner for smoke index test . 80
Figure 15 – Schematic front view of smoke test sample holder, showing vertically
mounted sleeving samples . 81
Figure 16 – Assembly and fixture for dynamic shear at ambient temperature . 82
15/1034/CDV – 4 – IEC CDV 60684-2 © IEC 2024
Figure 17 – Assembly for heat shock and heat ageing . 83
Figure 18 – Schematic arrangement of rolling drum peel . 83
Figure 19 – Assembly preparation for aluminium rod dynamic shear . 84
Figure 20 – Test specimen for aluminium rod dynamic shear . 84
Figure 21 – Assembly for sealing test . 85
Figure 22 – Mandrel assembly . 85
Figure 23 – Slab specimen . 86
Figure 24 – T peel strength specimen . 86
Figure 25 - Flame propagation test – Method D . 87
Figure 26 – Abrasion resistance apparatus .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.