SIST EN 60745-2-13:2009

Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws

This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-13: Besondere Anforderungen für Kettensägen

Outils électroportatifs à moteur - Sécurité -- Partie 2-13: Règles particulières pour les scies à chaîne

S'applique aux scies à chaîne destinées à couper du bois et conçues pour être utilisées par une seule personne. Cette norme ne s'applique pas aux scies à chaîne conçues pour être utilisées conjointement avec un guide-chaîne et un couteau diviseur ou de toute autre manière telle qu'avec un support ou comme une machine fixe ou transportable. Ne s'applique pas aux scies à chaîne pour l'élagage des arbres comme défini dans l'ISO 11681-2, les scies à perche et les perches élagueuses.

Električna ročna orodja - Varnost - 2-13. del: Posebne zahteve za verižne žage (IEC 60745-2-13:2006, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 17-Nov-2009
• Withdrawal Date: 12-Mar-2024
• ICS: 25.140.20 - Electric tools
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Mar-2024
• Due Date: 05-Apr-2024
• Completion Date: 13-Mar-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 60745-2-13:2009 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

Relations

• Amended By: SIST EN 60745-2-13:2009/A1:2011 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006/A1:2009)
• Effective Date: 01-Feb-2011
• Revised: SIST EN 60745-2-13:2008 - Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws
• Effective Date: 13-May-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-13: Besondere Anforderungen für KettensägenOutils électroportatifs à moteur - Sécurité -- Partie 2-13: Règles particulières pour les scies à chaîneHand-held motor-operated electric tools
- Safety -- Part 2-13: Particular requirements for chain saws65.060.80Gozdarska opremaForestry equipment25.140.20Electric toolsICS:Ta slovenski standard je istoveten z:EN 60745-2-13:2009SIST EN 60745-2-13:2009en,fr,de01-december-2009SIST EN 60745-2-13:2009SLOVENSKI
STANDARDSIST EN 60745-2-13:20081DGRPHãþD



SIST EN 60745-2-13:2009



EUROPEAN STANDARD EN 60745-2-13 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-13:2009 E
ICS 25.140.20; 65.060.80 Supersedes EN 60745-2-13:2007
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006, modified)
Outils électroportatifs à moteur -
Sécurité -
Partie 2-13: Règles particulières
pour les scies à chaîne (CEI 60745-2-13:2006, modifiée)
Handgeführte motorbetriebene Elektrowerkzeuge -
Sicherheit - Teil 2-13: Besondere Anforderungen
für Kettensägen (IEC 60745-2-13:2006, modifiziert)
This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60745-2-13:2009



EN 60745-2-13:2009 - 2 - Foreword The text of the International Standard IEC 60745-2-13:2006, prepared by IEC SC 61F (transformed into IEC TC 116, Safety of hand-held motor-operated electric tools), together with the common modifications prepared by the Technical Committee CENELEC TC 61F (transformed into TC 116), was submitted to the CENELEC Unique Acceptance Procedure and was approved by CENELEC as EN 60745-2-13 on 2007-03-01. A draft amendment (prAB), extending Annex ZZ to include the new MD 2006/42/EC, was submitted to the formal vote. The combined texts were approved by CENELEC as a new edition of EN 60745-2-13 on 2009-06-01. This European Standard supersedes EN 60745-2-13:2007. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2009-12-29 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2009-12-29 This standard is divided into two parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directives 98/37/EC (Machinery Directive), amended by Directive 98/79/EC, and 2006/42/EC. See Annexes ZZA and ZZB. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directives concerned. CEN/TC 144 is producing standards for non-electric chain saws (EN 608). Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope of this standard. This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2. This Part 2-13 is to be used in conjunction with EN 60745-1:200
...