Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for routers and trimmers.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-17: Besondere Anforderungen für Oberfräsen und Kantenfräsen

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-17: Exigences particulières pour les défonceuses

No scope available

Elektromotorna orodja - Postopek meritve prahu - 2-17. del: Posebne zahteve za rezkalnike in obrezovalnike - Dopolnilo A1

General Information

Status
Published
Public Enquiry End Date
31-May-2021
Publication Date
07-Oct-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Oct-2021
Due Date
10-Dec-2021
Completion Date
08-Oct-2021

Relations

Buy Standard

Amendment
EN 50632-2-17:2016/A1:2021
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN 50632-2-17:2016/oprA1:2021
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50632-2-17:2016/A1:2021
01-november-2021
Elektromotorna orodja - Postopek meritve prahu - 2-17. del: Posebne zahteve za
rezkalnike in obrezovalnike - Dopolnilo A1
Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular
requirements for routers and trimmers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-17: Besondere
Anforderungen für Oberfräsen und Kantenfräsen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-17:
Exigences particulières pour les défonceuses
Ta slovenski standard je istoveten z: EN 50632-2-17:2016/A1:2021
ICS:
25.100.01 Rezalna orodja na splošno Cutting tools in general
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-17:2016/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-17:2016/A1:2021

---------------------- Page: 2 ----------------------
SIST EN 50632-2-17:2016/A1:2021

EUROPEAN STANDARD EN 50632-2-17:2016/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2021
ICS 13.040.40; 25.140.20; 65.060.80
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-17: Particular requirements for routers and trimmers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-17: Exigences particulières pour les Teil 2-17: Besondere Anforderungen für Oberfräsen und
défonceuses Kantenfräsen
This amendment A1 modifies the European Standard EN 50632-2-17:2016; it was approved by CENELEC on 2021-08-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50632-2-17:2016/A1:2021 E

---------------------- Page: 3 ----------------------
SIST EN 50632-2-17:2016/A1:2021
EN 50632-2-17:2016/A1:2021 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modifications to 4.3, “Operating conditions” . 4
3 Addition of Figures 101 and 102 . 6

2

---------------------- Page: 4 ----------------------
SIST EN 50632-2-17:2016/A1:2021
EN 50632-2-17:2016/A1:2021 (E)
European foreword
This document (EN 50632-2-17:2016/A1:2021) has been prepared by CLC/TC 116 “Safety and environmental
aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2022-08-09
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2024-08-09
conflicting with this document have to be
withdrawn
This amendment was developed to include improvements and clarifications suggested by practical tests.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to th
...

SLOVENSKI STANDARD
SIST EN 50632-2-17:2016/oprA1:2021
01-maj-2021
Elektromotorna orodja - Postopek meritve prahu - 2-17. del: Posebne zahteve za
rezkalnike in obrezovalnike - Dopolnilo A1
Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular
requirements for routers and trimmers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-17: Besondere
Anforderungen für Oberfräsen und Kantenfräsen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-17:
Exigences particulières pour les défonceuses
Ta slovenski standard je istoveten z: EN 50632-2-17:2016/prA1
ICS:
25.100.01 Rezalna orodja na splošno Cutting tools in general
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-17:2016/oprA1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-17:2016/oprA1:2021

---------------------- Page: 2 ----------------------
SIST EN 50632-2-17:2016/oprA1:2021

NORME EUROPÉENNE
PROJET
EN 50632-2-17:2016
EUROPÄISCHE NORM

EUROPEAN STANDARD
prA1
Mars 2021
ICS 13.040.40; 25.140.20; 65.060.80
Version française
Outils électriques à moteur - Procédure de mesure de la
poussière - Partie 2-17: Exigences particulières pour les
défonceuses
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Electric motor-operated tools - Dust measurement
Teil 2-17: Besondere Anforderungen für Oberfräsen und procedure - Part 2-17: Particular requirements for routers
Kantenfräsen and trimmers
Ce projet d'amendement prA1, s'il est approuvé, modifiera la Norme Européenne EN 50632-2-17:2016; il est soumis aux membres du
CENELEC pour enquête.
Date limite du CENELEC: 2021-06-18.
Il a été établi par le CLC/TC 116.

Si ce projet devient un amendement, les membres du CENELEC sont tenus de se soumettre au Règlement Intérieur du CEN/CENELEC,
qui définit les conditions dans lesquelles doit être attribué, sans modification, le statut de norme nationale à cet amendement.

Le présent projet d'amendement a été établi par le CENELEC en trois versions officielles (allemand, anglais, français).
Une version dans une autre langue faite par traduction sous la responsabilité d'un membre du CENELEC dans sa langue nationale, et
notifiée au CEN-CENELEC Management Centre, a le même statut que les versions officielles.

Les membres du CENELEC sont les comités électrotechniques nationaux des pays suivants: Allemagne, Autriche, Belgique, Bulgarie,
Chypre, Croatie, Danemark, Espagne, Estonie, Finlande, France, Grèce, Hongrie, Irlande, Islande, Italie, Lettonie, Lituanie, Luxembourg,
Malte, Norvège, Pays-Bas, Pologne, Portugal, République de Macédoine du Nord, République de Serbie, République Tchèque, Roumanie,
Royaume-Uni, Slovaquie, Slovénie, Suède, Suisse et Turquie.

Les destinataires du présent projet sont invités à présenter, avec leurs observations, notifications des droits de propriété dont ils auraient
éventuellement connaissance et à fournir une documentation explicative.

Avertissement: Le présent document n'est pas une Norme Européenne. Il est diffusé pour examen et observations. Il est susceptible de
modification sans préavis et ne doit pas être cité comme Norme Européenne.


Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
European Committee for Electrotechnical Standardization
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Bruxelles
© 2021 CENELEC Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux
membres du CENELEC.
Project: 72585 Réf. n° EN 50632-2-17:2016/prA1 F

---------------------- Page: 3 ----------------------
SIST EN 50632-2-17:2016/oprA1:2021
EN 50632-2-17:2016/prA1:2021 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modifications to 4.3, “Operating conditions” . 4
3 Addition of Figures 101 and 102 . 6

2

---------------------- Page: 4 ----------------------
SIST EN 50632-2-17:2016/oprA1:2021
EN 50632-2-17:2016/prA1:2021 (E)
European foreword
This document (EN 50632-2-17:2016/prA1:2021) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an ident
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.