Chimneys - Requirements for metal chimneys - Part 1: System chimney products

This standard specifies the performance requirements for single and multi-wall metal chimney products with metallic liners used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here, are included in prEN 1856-2:1996. This standard does not apply to structurally independent (free standing or self-supporting) chimneys.

Abgasanlagen - Anforderungen an Metall-Abgasanlagen - Teil 1: Bauteile für System-Abgasanlagen

Diese Norm legt Leistungsanforderungen für Bauteile für ein- und mehrschalige System-Abgasanlagen mit Metallinnenrohren (Abschnitte der Abgasanlagen, Formstücke und Aufsätze, einschließlich der Halterungen) fest, welche zur Ableitung von Verbrennungsprodukten von Feuerstätten an die Außenluft verwendet werden. Sie enthält ebenfalls Anforderungen an die Kennzeichnung, die Herstelleranweisungen, die Produktinformationen und die Beurteilung der Konformität. Innenrohre und Verbindungsstücke aus Metall, die in dieser Norm nicht behandelt werden, sind in prEN 1856-2:1996 angegeben.
Diese Norm gilt nicht für Abgasanlagen (freistehend oder selbststützend), die von der Tragkonstruktion unabhängig errichtet werden können.

Conduits de fumée - Prescriptions pour les conduits de fumée métalliques - Partie 1: Composants de systemes de conduits de fumée

La présente norme spécifie les prescriptions de performance des composants de conduits de fumée avec conduits intérieurs métalliques simple ou multi-parois utilisés pour évacuer les produits de combustion des appareils jusqu'à l'atmosphère extérieure. Elle précise aussi les prescriptions relatives au marquage, aux instructions du constructeur, aux informations du constructeur sur le conduit de fumée et à l'évaluation de la conformité. Les tubages et éléments de raccordement métalliques font l'objet du prEN 1856-2:1996.

Dimniki – Zahteve za kovinske dimnike – 1. del: Proizvodi za sistemske dimnike

General Information

Status
Withdrawn
Publication Date
31-Aug-2003
Withdrawal Date
02-Jul-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Jul-2009
Due Date
26-Jul-2009
Completion Date
03-Jul-2009

Relations

Buy Standard

Standard
EN 1856-1:2003
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Chimneys - Requirements for metal chimneys - Part 1: System chimney productsDimniki – Zahteve za kovinske dimnike – 1. del: Proizvodi za sistemske dimnikeConduits de fumée - Prescriptions pour les conduits de fumée métalliques - Partie 1: Composants de systemes de conduits de fuméeAbgasanlagen - Anforderungen an Metall-Abgasanlagen - Teil 1: Bauteile für System-Abgasanlagen91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:SIST EN 1856-1:2003enTa slovenski standard je istoveten z:EN 1856-1:200301-september-2003SIST EN 1856-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1856-1June 2003ICS 91.060.40English versionChimneys - Requirements for metal chimneys - Part 1: Systemchimney productsConduits de fumée - Prescriptions pour les conduits defumée métalliques - Partie 1: Composants de systèmes deconduits de fuméeAbgasanlagen - Anforderungen an Metall-Abgasanlagen -Teil 1: Bauteile für System-AbgasanlagenThis European Standard was approved by CEN on 17 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1856-1:2003 E

(normative)
Corrosion tests.23Annex B
(normative)
Choice of size for type test and sampling.43Annex C
(normative)
Sampling for factory production control.44Annex D
(normative)
Factory production control.47Annex ZA (informative)
Clauses of this European standard addressing the provisions of the EUConstruction Products Directive.49Bibliography.59

Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. These normativereferences are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references,subsequent amendments to or revisions of any of these publications apply to this European Standard only whenincorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies(including amendments).EN 573-3Aluminium and aluminium alloys - Chemical composition and formof wrought products - Part 3: Chemical composition.EN 1443:2003Chimneys - General requirements.EN 1859:2000Chimneys - Metal chimneys - Test methods.EN 10088-1Stainless steel - Part 1: List of stainless steels.prEN 12391Chimneys - Metal chimneys.EN 13384-1:2002Chimneys - Thermal and fluid dynamic calculation methods - Part1: Chimneys serving one appliance.EN ISO 3651-2Determination of resistance to intergranular corrosion of stainlesssteels. Part 2: Ferritic, austenitic and ferritic-austenitic (duplex)stainless steels. Corrosion test in media containing sulfuric acid(ISO 3651-2:1998).

Terminology. chimney components and chimney accessories3.27 minimum declared wall thicknessvalue for the minimum thickness of the liner wal
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.