SIST EN 1366-10:2022/kFprA1:2024

Fire resistance tests for service installations - Part 10: Smoke control dampers

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions, as well as at ambient temperatures.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501-4 and this document is expected to be considered before carrying out these tests.
NOTE   Some smoke control dampers to be tested might require testing following the information given in EN 1366-2 and this needs consideration before carrying out testing.
This document is expected to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366-8 and EN 1366-9.

Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen

Essais de résistance au feu des installations techniques - Partie 10 : Volets de désenfumage

Preskusi požarne odpornosti servisnih inštalacij - 10. del: Dimne lopute - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 10-Sep-2023
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• ICS: 91.060.40 - Chimneys, shafts, ducts
• ICS: 91.140.30 - Ventilation and air-conditioning systems
• Technical Committee: POZ - Požarna varnost
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 05-Aug-2024
• Due Date: 10-Aug-2024
• Completion Date: 05-Aug-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
• Ref Project: EN 1366-10:2022/FprA1 - Fire resistance tests for service installations - Part 10: Smoke control dampers

Relations

• Amends: SIST EN 1366-10:2022 - Fire resistance tests for service installations - Part 10: Smoke control dampers
• Effective Date: 03-Aug-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1366-10:2022/oprA1:2023
01-september-2023
Preskusi požarne odpornosti servisnih inštalacij - 10. del: Dimne lopute -
Dopolnilo A1
Fire resistance tests for service installations - Part 10: Smoke control dampers
Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen
Essais de résistance au feu des installations techniques - Partie 10 : Volets de
désenfumage
Ta slovenski standard je istoveten z: EN 1366-10:2022/prA1
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
SIST EN 1366-10:2022/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 1366-10:2022/oprA1:2023

SIST EN 1366-10:2022/oprA1:2023

DRAFT
EUROPEAN STANDARD
EN 1366-10:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2023
ICS 13.220.50; 91.140.30
English Version
Fire resistance tests for service installations - Part 10:
Smoke control dampers
Essais de résistance au feu des installations techniques Feuerwiderstandsprüfungen für Installationen - Teil
- Partie 10 : Volets de désenfumage 10: Entrauchungsklappen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 127.

This draft amendment A1, if approved, will modify the European Standard EN 1366-10:2022. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1366-10:2022/prA1:2023 E
worldwide for CEN national Members.

SIST EN 1366-10:2022/oprA1:2023
EN 1366-10:2022/prA1 (E)
Contents Page
1 Modification to the European foreword . 3
2 Modifi
...