iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 4064-3:2025

(Main)

Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)

Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)

ISO 4064-3:2014|OIML R 49-3:2013 specifies a test report format to be used in conjunction with ISO 4064-1:2014|OIML R 49-1:2013 and ISO 4064-2:2014|OIML R 49-2:2013 for water meters for cold potable water and hot water.

Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 3: Format des Prüfberichtes (ISO 4064-3:2024)

Dieser Teil von ISO 4064|OIML R 49 legt ein Prüfberichtformat fest, das in Verbindung mit ISO 4064 1|OIML R 49 1 und ISO 4064 2|OIML R 49 2 für Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser anzuwenden ist.

Compteurs d'eau potable froide et d'eau chaude - Partie 3: Format du rapport d'essais (ISO 4064-3:2024)

L'ISO 4064-3:2014|OIML R 49-3:2013 spécifie le format du rapport d'essai à utiliser dans le contexte de la mise en oeuvre de l'ISO 4064‑1:2014|OIML R 49-1:2013 et de l'ISO 4064‑2:2014|OIML R 49-2:2013 pour les compteurs d'eau potable froide et d'eau chaude.

Vodomeri za merjenje hladne pitne vode in vroče vode - 3. del: Obrazec za poročilo o preskusu (ISO 4064-3:2024)

General Information

Status
Published
Public Enquiry End Date
28-Dec-2023
Publication Date
21-Jan-2025
ICS
17.120.10 - Flow in closed conduits
91.140.60 - Water supply systems
Technical Committee
IMIN - Measurement instruments
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Jan-2025
Due Date
23-Mar-2025
Completion Date
22-Jan-2025
Ref Project
EN ISO 4064-3:2025 - Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)

Relations

Revises
SIST EN ISO 4064-3:2014 - Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2014)
Effective Date
19-Jan-2023

Buy Standard

EN ISO 4064-3:2025EN ISO 4064-3:2025
PreviousNext
Standard
EN ISO 4064-3:2025
English language
78 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2025
Vodomeri za merjenje hladne pitne vode in vroče vode - 3. del: Obrazec za poročilo
o preskusu (ISO 4064-3:2024)
Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064
-3:2024)
Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 3: Format
des Prüfberichtes (ISO 4064-3:2024)
Compteurs d'eau potable froide et d'eau chaude - Partie 3: Format du rapport d'essais
(ISO 4064-3:2024)
Ta slovenski standard je istoveten z: EN ISO 4064-3:2025
ICS:
17.120.10 Pretok v zaprtih vodih Flow in closed conduits
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4064-3
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2025
EUROPÄISCHE NORM
ICS 91.140.60 Supersedes EN ISO 4064-3:2014
English Version
Water meters for cold potable water and hot water - Part
3: Test report format (ISO 4064-3:2024)
Compteurs d'eau potable froide et d'eau chaude - Wasserzähler zum Messen von kaltem Trinkwasser
Partie 3: Format du rapport d'essai (ISO 4064-3:2024) und heißem Wasser - Teil 3: Format des Prüfberichtes
(ISO 4064-3:2024)
This European Standard was approved by CEN on 18 November 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4064-3:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4064-3:2025) has been prepared by Technical Committee ISO/TC 30
"Measurement of fluid flow in closed conduits" in collaboration with Technical Committee CEN/TC 92
“Water meters” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2025, and conflicting national standards shall be
withdrawn at the latest by July 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4064-3:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4064-3:2024 has been approved by CEN as EN ISO 4064-3:2025 without any
modification.
International
Standard
ISO 4064-3
Fifth edition
Water meters for cold potable water
2024-12
and hot water —
Part 3:
Test report format
Compteurs d’eau potable froide et d’eau chaude —
Partie 3: Format du rapport d’essai
Reference number
ISO 4064-3:2024(en) © ISO 2024

ISO 4064-3:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4064-3:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols, and abbreviated terms . 1
4 Type evaluation report . 1
4.1 General .1
4.2 Information concerning the type .2
4.2.1 General .2
4.2.2 Model submitted .2
4.2.3 Mechanical water meter (complete or combined) .3
4.2.4 Electronic water meter (complete or combined) .4
4.2.5 Separable calculator (including indicating device) .6
4.2.6 Separable measurement transducer (including flow or volume sensor) .7
4.2.7 Supplementary electronic device(s) used for testing (permanently attached to
meter) .9
4.2.8 Supplementary electronic device(s) used for data transmission (permanently
attached to meter) . .9
4.2.9 Supplementary electronic device(s) used for testing (temporarily attached to
meter) .10
4.2.10 Supplementary electronic device(s) used for data transmission (temporarily
attached to meter) . .10
4.2.11 Ancillary devices .10
4.2.12 Documents concerning the type .11
4.3 General information concerning the test equipment .11
4.4 Check list for water meter examinations and performance tests. 12
4.4.1 Check list for water meter examinations . 12
4.4.2 Checklist for water meter performance tests .16
4.5 Type evaluation tests (for all water meters) .21
4.5.1 Static pressure test (ISO 4064-2:2024|OIML R 49-2:2024, 7.3) .21
4.5.2 Determination of changeover flow rates for combination meters (ISO 4064-
2:2024|OIML R 49-2:2024, 7.4.3) . 22
4.5.3 Determination of the intrinsic errors (of indication) and the effects of meter
orientation (ISO 4064-2:2024|OIML R 49-2:2024, 7.4.4) . 23
4.5.4 Interchange test on all types of cartridge meters and meters with exchangeable
metrological modules (ISO 4064-1:2024|OIML R 49-1:2024, 7.2.7, ISO 4064-
2:2024|OIML R 49-2:2024, 7.4.4, 7.4.6) . 25
4.5.5 Water temperature test (ISO 4064-2:2024|OIML R 49-2:2024, 7.5) and overload
water temperature test (ISO 4064-2:2024|OIML R 49-2:2024, 7.6) .27
4.5.6 Water pressure test (ISO 4064-2:2024|OIML R 49-2:2024, 7.7) . 28
4.5.7 Reverse flow test (ISO 4064-2:2024|OIML R 49-2:2024, 7.8) . 29
4.5.8 Pressure-loss test (ISO 4064-2:2024|OIML R 49-2:2024, 7.9) . 30
4.5.9 Flow disturbance tests (ISO 4064-2:2024|OIML R 49-2:2024, 7.10, Annex C) .31
4.5.10 Durability tests (ISO 4064-2:2024|OIML R 49-2:2024, 7.11) . . 33
4.5.11 Static magnetic field test (ISO 4064-2:2024|OIML R 49-2:2024, 7.12, 8.16). 39
4.5.12 Tests on ancillary devices of a water meter (ISO 4064-2:2024|OIML R 49-2:2024,
7.13) . 40
4.6 Type evaluation tests (for electronic water meters and mechanical water meters with
electronic components) .43
4.6.1 Dry heat (non-condensing) (ISO 4064-2:2024|OIML R 49-2:2024, 8.2) .43
4.6.2 Cold (ISO 4064-2:2024|OIML R 49-2:2024, 8.3). 44
4.6.3 Damp heat, cyclic (condensing) (ISO 4064-2:2024|OIML R 49-2:2024, 8.4) .45
4.6.4 Power supply variation (ISO 4064-2:2024|OIML R 49-2:2024, 8.5) . 46
4.6.5 Vibration (random) (ISO 4064-2:2024|OIML R 49-2:2024, 8.6) . 48

iii
ISO 4064-3:2024(en)
4.6.6 Mechanical shock (ISO 4064-2:2024|OIML R 49-2:2024, 8.7) . 49
4.6.7 AC mains voltage dips, short interruptions and voltage variations (ISO 4064-
2:2024|OIML R 49-2:2024, 8.8) . 50
4.6.8 Bursts on signal lines (ISO 4064-2:2024|OIML R 49-2:2024, 8.9) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 4064-4:2025(Main)
Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2024)
EN ISO 4064-4:2025

ISO 4064-4:2014 applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume.
ISO 4064-4:2014 specifies technical characteristics and pressure loss requirements for meters for cold potable water and hot water. It applies to water meters which can withstand: a) a maximum admissible working pressure (MAP) equal to at least 1 MPa [0,6 MPa for meters for use with pipe nominal diameters (DNs) ≥500 mm]; b) a maximum admissible temperature (MAT) for cold potable water meters of 30 °C; c) a MAT for hot water meters up to 180 °C, depending on class.
In addition to meters based on mechanical principles, ISO 4064-4:2014 also applies to water meters based on electrical or electronic principles, and to water meters based on mechanical principles incorporating electronic devices, used to meter the volume flow of hot water and cold potable water. It also applies to electronic ancillary devices. As a rule ancillary devices are optional. However, national or international regulations may make some ancillary devices mandatory in relation to the utilization of the water meter.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-2:2017/A11:2023(Amendment)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN ISO 4064-2:2017/A11:2022
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-5:2017/A11:2023(Amendment)
Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014)
EN ISO 4064-5:2017/A11:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-1:2017/A11:2023(Amendment)
Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
EN ISO 4064-1:2017/A11:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-2:2017(Main)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN ISO 4064-2:2017

This part of ISO 4064|OIML R 49 is applicable to the type evaluation and initial verification testing of
water meters for cold potable water and hot water as defined in ISO 4064-1:2014|OIML R 49‑1:2013.
OIML Certificates of Conformity can be issued for water meters under the scope of the OIML Certificate
System, provided that this part of ISO 4064|OIML R 49, ISO 4064-1:2014|OIML R 49‑1:2013 and
ISO 4064-3:2014|OIML R 49‑3:2013 are used in accordance with the rules of the System.
This part of ISO 4064|OIML R 49 sets out details of the test programme, principles, equipment and
procedures to be used for the type evaluation, and initial verification of a meter type.
The provisions of this part of ISO 4064|OIML R 49 also apply to ancillary devices, if required by national
regulations.
The provisions include requirements for testing the complete water meter and for testing the
measurement transducer (including the flow or volume sensor) and the calculator (including the
indicating device) of a water meter as separate units.

  • Standard
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-5:2017(Main)
Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014)
EN ISO 4064-5:2017

This part of ISO 4064 applies to water meters used to meter the volume of cold potable water and hot
water flowing through a fully charged, closed conduit. These water meters incorporate devices which
indicate the integrated volume.
This part of ISO 4064 specifies criteria for the selection of single, combination and concentric water
meters, associated fittings, installation, special requirements for meters, and the first operation of new
or repaired meters to ensure accurate constant measurement and reliable reading of the meter.
In addition to meters based on mechanical principles, this part of ISO 4064 also applies to water
meters based on electrical or electronic principles, and to water meters based on mechanical principles
incorporating electronic devices, used to measure the volume of cold potable water and hot water. It also
applies to electronic ancillary devices. Ancillary devices are optional. However, national or international
regulations may make some ancillary devices mandatory in relation to the utilization of the water meter.
The recommendations of this part of ISO 4064 apply to water meters, irrespective of technology, defined
as integrating measuring instruments continuously determining the volume of water flowing through
them.
NOTE Any national regulations apply in the country of use.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-1:2017(Main)
Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
EN ISO 4064-1:2017

This part of ISO 4064|OIML R 49 specifies the metrological and technical requirements for water meters
for cold potable water and hot water flowing through a fully charged, closed conduit. These water meters
incorporate devices which indicate the integrated volume.
In addition to water meters based on mechanical principles, this part of ISO 4064|OIML R 49 applies to
devices based on electrical or electronic principles, and mechanical principles incorporating electronic
devices, used to measure the volume of cold potable water and hot water.
This part of ISO 4064|OIML R 49 also applies to electronic ancillary devices. Ancillary devices are
optional. However, it is possible for national or regional regulations to render some ancillary devices
mandatory in relation to the utilization of water meters.
NOTE Any national regulations apply in the country of use.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 4064-1:2024(Main)
Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO/FDIS 4064-1:2024)
FprEN ISO 4064-1

This document specifies the metrological and technical requirements for water meters for cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the accumulated volume.
In addition to water meters based on mechanical principles, this document applies to devices based on electrical or electronic principles, and mechanical principles incorporating electronic devices, used to measure the volume of cold potable water and hot water.
This document also applies to electronic ancillary devices. Ancillary devices are optional. However, it is possible for national or regional regulations to render some ancillary devices mandatory in relation to the utilization of water meters.
NOTE            Any national regulations apply in the country of use.

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 4064-2:2024(Main)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO/FDIS 4064-2:2024)
FprEN ISO 4064-2

This document is applicable to the type evaluation and initial verification testing of water meters for cold potable water and hot water as defined in ISO 4064-1:2024|OIML R 49‑1:2024. OIML Certificates of conformity can be issued for water meters under the scope of the OIML Certificate System, provided that this document, ISO 4064-1:2024|OIML R 49‑1:2024 and ISO 4064-3:2024|OIML R 49‑3:2024 are used in accordance with the rules of the system.
This document sets out details of the test programme, principles, equipment and procedures to be used for the type evaluation, and initial verification of a meter type.
The provisions of this document also apply to ancillary devices, if required by national regulations.
The provisions include requirements for testing the complete water meter and for testing the measurement transducer (including the flow or volume sensor) and the calculator (including the indicating device) of a water meter as separate units.

  • Draft
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 4064-5:2023(Main)
Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO/DIS 4064-5:2023)
prEN ISO 4064-5

ISO 4064-5:2014 applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume.
ISO 4064-5:2014 specifies criteria for the selection of single, combination and concentric water meters, associated fittings, installation, special requirements for meters, and the first operation of new or repaired meters to ensure accurate constant measurement and reliable reading of the meter.
In addition to meters based on mechanical principles, ISO 4064-5:2014 also applies to water meters based on electrical or electronic principles, and to water meters based on mechanical principles incorporating electronic devices, used to measure the volume of cold potable water and hot water. It also applies to electronic ancillary devices. Ancillary devices are optional. However, national or international regulations may make some ancillary devices mandatory in relation to the utilization of the water meter.
The recommendations of ISO 4064-5:2014 apply to water meters, irrespective of technology, defined as integrating measuring instruments continuously determining the volume of water flowing through them.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day