SIST EN 840-1:2013
(Main)Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.
Fahrbare Abfall- und Wertstoffbehälter - Teil 1: Behälter mit 2 Rädern und einem Nennvolumen bis 400 l für Kammschüttungen - Maße und Formgebung
Die vorliegende Europäische Norm legt Maße und Anforderungen an die Formgebung von fahrbaren Abfall¬- und Wertstoffbehältern (im Folgenden kurz Behälter genannt) mit 2 Rädern und einem Nennvolumen bis 400 l für Kamm¬schüttungen fest.
Conteneurs roulants à ordures ménagères et recyclables - Partie 1 : Conteneurs à 2 roues de capacité inférieure ou égale à 400 l pour lève-conteneurs à peigne - Dimensions et conception
La présente Norme européenne spécifie les dimensions et les exigences de conception pour les conteneurs roulants à deux roues dont la capacité est inférieure ou égale à 400 l, pour lève-conteneurs à peigne.
Premični zabojniki za odpadke - 1. del: Zabojniki na dveh kolesih s prostornino do 400 l za iztresalnike z glavnikom - Mere in oblika
Ta evropski standard določa dimenzije in zahteve za obliko mobilnih zabojnikov za odpadke in recikliranje z 2 kolesoma in zmogljivostjo do 400 l, ki naj bi jih uporabljale naprave za dviganje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 840-1:2013
01-julij-2013
1DGRPHãþD
SIST EN 840-1:2004
3UHPLþQL]DERMQLNL]DRGSDGNHGHO =DERMQLNLQDGYHKNROHVLKVSURVWRUQLQRGR
O]DL]WUHVDOQLNH]JODYQLNRP0HUHLQREOLND
Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity
up to 400 l for comb lifting devices - Dimensions and design
Fahrbare Abfall- und Wertstoffbehälter - Teil 1: Behälter mit 2 Rädern und einem
Nennvolumen bis 400 l für Kammschüttungen - Maße und Formgebung
Conteneurs roulants à ordures ménagères et recyclables - Partie 1 : Conteneurs à 2
roues de capacité inférieure ou égale à 400 l pour lève-conteneurs à peigne -
Dimensions et conception
Ta slovenski standard je istoveten z: EN 840-1:2012
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 840-1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 840-1:2013
---------------------- Page: 2 ----------------------
SIST EN 840-1:2013
EUROPEAN STANDARD
EN 840-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 13.030.40 Supersedes EN 840-1:2004
English Version
Mobile waste and recycling containers - Part 1: Containers with
2 wheels with a capacity up to 400 l for comb lifting devices -
Dimensions and design
Conteneurs roulants à ordures ménagères et recyclables - Fahrbare Abfall- und Wertstoffbehälter - Teil 1: Behälter mit
Partie 1 : Conteneurs à 2 roues de capacité inférieure ou 2 Rädern und einem Nennvolumen bis 400 l für
égale à 400 l pour lève-conteneurs à peigne - Dimensions Kammschüttungen - Maße und Formgebung
et conception
This European Standard was approved by CEN on 22 September 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 840-1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 840-1:2013
EN 840-1:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Volumes .5
5 Dimensions and design .5
6 Nominal mass .6
7 Safety and health requirements .6
8 Testing .6
9 Marking .6
10 Designation .7
Annex A (informative) Nomenclature . 12
Annex B (informative) Recommendations for manufacturers of lifting devices . 16
Annex C (informative) A-Deviations . 17
Bibliography . 18
2
---------------------- Page: 4 ----------------------
SIST EN 840-1:2013
EN 840-1:2012 (E)
Foreword
This document (EN 840-1:2012) has been prepared by Technical Committee CEN/TC 183 “Waste
management”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 840-1:2004.
Technical changes since the latest edition:
The content was adapted to the current state of the art and revised editorially.
Figure 3 – The functional dimension 28 for frontal receivers and the dimension 28 were redefined.
This European Standard is one part of the series of standards of EN 840 with the main title Mobile waste and
recycling containers comprising the following parts:
Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices Dimensions and
design (the present document);
Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb
lifting devices Dimensions and design;
Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb
lifting devices Dimensions and design;
Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG-
and/or wide comb lifting devices Dimensions and design;
Part 5: Performance requirements and test methods;
Part 6: Safety and health requirements.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 840-1:2013
EN 840-1:2012 (E)
1 Scope
This European Standard specifies dimensions and design requirements of mobile waste and recycling
containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 840-5, Mobile waste and recycling containers — Part 5: Performance requirements and test methods
EN 840-6, Mobile waste and recycling containers — Part 6: Safety and health requirements
EN 1501-5, Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting
devices for refuse collection vehicles
EN ISO 11469, Plastics — Generic identification and marking of plastics products (ISO 11469)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
NOTE Terms for components of mobile waste and recycling containers and lifting devices in three languages are
given in Annex A.
3.1
mobile waste and recycling container
appropriately designed container fitted with wheels intended to temporarily store waste
3.2
lifting device
structure which picks-up, tilts and empties containers
3.3
comb lifting device
lifting device in which the picking-up system consists of a row of teeth and a locking system to retain the
container during emptying
3.4
volume
total space inside the container when the lid is closed
Note 1 to entry: See Table 1.
3.5
nominal volume
capacity
volume stated by the manufacturer
Note 1 to entry: See Table 1 without tolerances.
Note 2 to entry: The English term "capacity" and the French term "capacité" are translated in the German version by
the term "Nennvolumen".
4
---------------------- Page: 6 ----------------------
SIST EN 840-1:2013
EN 840-1:2012 (E)
3.6
nominal load
load mass as given in Clause 6
3.7
total permissible mass
mass of the container plus the nominal load
3.8
functional and safety dimensions
essential dimensions which ensure the functionality and interchangeability of the container with the compatible
lifting device and which are necessary for the operator's safety and health
4 Volumes
This standard identifies the two classes of containers:
Class I - small size (nominal volume up to 200 l);
Class II - large size (nominal volume between 200 l and 400 l).
Within the two above-mentioned classes of containers the volumes shown in Table 1 are identified.
Table 1 — Volumes
Volume in l
390 ± 20
+13 +18 +8 +6 +40 +25 +15 +15 +25 +40
60 80 120 140 180 190 210 240 260 340
−5 −5 −5 −5 −5
−6 −12 −10 −10 −25
For methods of measuring capacity, see EN 840-5.
The volumes shown in Table 1 correspond to mobile waste and recycling container's capacities at present
used in Europe. Since there are some overlapping capacities due to the tolerances, client and manufacturer
shall decide while ordering the capacity chosen.
Nominal volumes different from those referenced in Table 1 can be used by agreement between user and
manufacturer. The tolerance of the volumes shall be ± 10 % maximum measured according to EN 840-5.
5 Dimensions and design
5.1 The design of the containers need not correspond to the drawings given in Figure 1. The functional
dimensions given in Tables 2 and 3 shall be respected.
5.2 The container shall be constructed so that when it is unloaded or loaded with a nominal load
(see Clause 6), it fits on an approved compatible lifting device. It shall be automatically locked safely into the
lifting device during the lifting operation. The frontal receiver shall correspond to one of the options given in
Figure 2 (Form A or B).
5.3 The lid(s) shall cover the opening of the container completely. It shall be opened easily by itself during
the emptying cycle. It/they shall be made with at least 2 fixing points and have at least one means of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.