iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50206-2:1999

(Main)

Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2: Pantographs for metros and light rail vehicles

Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2: Pantographs for metros and light rail vehicles

This standard defines the general assembly characteristics which are to be applied to pantographs, to enable current collection from the overhead line system. It also defines the tests the pantographs have to perform, excluding insulators. This standard does not apply to pantograph dielectric tests, which are to be performed on the pantograph installed on the vehicle roof. This standard does not apply to pantographs used on main line vehicles: these pantographs are considered in EN 50206-1. This standard relates to conventional suspended overhead line systems and accessories. The systems (or part of them) which are rigidly suspended will require special consideration between the customer and the supplier

Bahnanwendungen - Schienenfahrzeuge - Merkmale und Prüfungen von Stromabnehmern -- Teil 2: Dachstromabnehmer für Stadtbahnen und Straßenbahnen

Applications ferroviaires - Matériel roulant - Pantographes: Caractéristiques et essais -- Partie 2: Pantographes pour métros et tramways

Železniške naprave – Vozna sredstva – Odjemniki toka: karakteristike in preskusi – 2. del: Odjemniki toka za mestne železnice in lahka železniška vozila

General Information

Status
Withdrawn
Publication Date
30-Nov-1999
Withdrawal Date
07-Apr-2011
ICS
45.140 - Metro, tram and light rail equipment
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Apr-2011
Due Date
30-Apr-2011
Completion Date
08-Apr-2011
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
Ref Project
EN 50206-2:1999 - Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles

Relations

Revised
SIST EN 50206-2:2011 - Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
Effective Date
07-May-2013
Replaced By
SIST EN 50206-2:2011 - Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
Effective Date
07-Jun-2022
Replaced By
SIST EN 50206-2:2011 - Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
Effective Date
01-Jun-2011
Replaced By
SIST EN 50206-2:2011 - Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
Effective Date
29-Jan-2023

Buy Standard

EN 50206-2:1999EN 50206-2:1999
PreviousNext
Standard
EN 50206-2:1999
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50206-2:1999
01-december-1999
Železniške naprave – Vozna sredstva – Odjemniki toka: karakteristike in preskusi –
2. del: Odjemniki toka za mestne železnice in lahka železniška vozila
Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2:
Pantographs for metros and light rail vehicles
Bahnanwendungen - Schienenfahrzeuge - Merkmale und Prüfungen von
Stromabnehmern -- Teil 2: Dachstromabnehmer für Stadtbahnen und Straßenbahnen
Applications ferroviaires - Matériel roulant - Pantographes: Caractéristiques et essais --
Partie 2: Pantographes pour métros et tramways
Ta slovenski standard je istoveten z: EN 50206-2:1999
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 50206-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50206-2:1999

---------------------- Page: 2 ----------------------

SIST EN 50206-2:1999

---------------------- Page: 3 ----------------------

SIST EN 50206-2:1999

---------------------- Page: 4 ----------------------

SIST EN 50206-2:1999

---------------------- Page: 5 ----------------------

SIST EN 50206-2:1999

---------------------- Page: 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50206-2:2011(Main)
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
EN 50206-2:2010

This European Standard defines the general assembly characteristics which are to be applied to
pantographs, to enable current collection from the overhead line equipment. It also defines the tests the pantographs have to perform, excluding insulators.
This European Standard does not apply to pantograph dielectric tests, which are to be performed on the pantograph installed on the vehicle roof. If no other requirement is agreed between customer and supplier, insulation coordination according to EN 50124-1 may be used.
This European Standard does not apply to pantographs used on main line vehicles: these pantographs are considered in EN 50206-1.
This European Standard relates to conventional suspended overhead line equipment and accessories.
The systems (or part of them) which are rigidly suspended will require special consideration between the customer and the supplier.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-8:2022(Main)
Railway applications - Driver's cab - Part 8: Tram vehicle layout and access
EN 16186-8:2022

This European standard gives design rules and requirements in order to ensure proper access, lighting, seating and exit of the driver’s cab. The different dimensions are based on the anthropometric data defined in EN 16186-5. The corresponding assessment methods are also included in this standard. It covers the following aspects:
- dimension and interior layout;
- door access, steps, floor characteristics;
- seats dimension and clearance;
- interior cab lighting;
- emergency exit;
- marking and labelling,
This part of EN 16186 series applies to vehicles operating on tram networks.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14752:2020+A1:2022(Main)
Railway applications - Bodyside entrance systems for rolling stock
EN 14752:2019+A1:2021

This document applies to passenger body side entrance systems of all newly designed railway vehicles such as tram, metro, suburban, mainline and high-speed trains that carry passengers. The requirements of this document also apply to existing vehicles undergoing refurbishment of the door equipment, as far as it is reasonably practicable.
This document also specifies the requirements for testing of entrance systems.
This document makes reference to manual and power operated entrance systems. For manual doors, clauses referring to power operation are not applicable.
This document does not apply to the following:
-   entrance systems for equipment access, inspection or maintenance purposes and for crew only use;
-   doors on freight wagons; and
-   doors or hatches specifically provided for escape under emergency conditions.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17355:2020(Main)
Railway applications - Communication device for urban rail - System requirements
EN 17355:2020

This document defines the following elements for urban rail rolling stock:
-   the functional requirements for a communication device between passengers and driver or Operations Control Centre (OCC);
-   the dynamic behaviour of the Communication device.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
-   (I) Metros;
-   (II) Trams;
-   (III) Light Rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
This document applies to rolling stock both with and without driver.
NOTE 2   The communication device is different from the PAS, but it can share some parts of the PAS to achieve its functionalities.
NOTE 3   The PAS is regarded as a safety relevant system whereas communication device is non-safety relevant aid to passengers.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17319:2020(Main)
Railway applications - Infrastructure - Performance requirements of rail fastening systems for tramways
EN 17319:2020

This European Standard is applicable to rail fastening systems used with grooved rails for tram and light rail tracks, including tracks embedded in streets.
The requirements apply to:
-   fastening systems which act on the foot and/or web of the rail including direct and indirect fastening systems;
-   fastening systems for the rail sections in EN 14811
This standard is not applicable to fastening systems for other rail sections or special fastening systems used at bolted joints or glued joints.
This standard is for type approval of a complete fastening assembly only.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17420:2020(Main)
Railway applications - Vehicle end design for trams and light rail vehicles with respect to pedestrian safety
CEN/TR 17420:2020

This document is applicable to tram vehicles according to prEN 17343. Tram-Train vehicles, on track machines, infrastructure inspection vehicles and road-rail machines according to prEN 17343 and demountable machines/machinery are not in the Scope of this Technical Report.
This document describes passive safety measures to reduce the consequences of collisions with pedestrians. These measures provide the last means of protection when all other possibilities of preventing an accident have failed, i.e.:
-   design recommendations for the vehicle front to minimize the impact effect on a pedestrian when hit,
-   design recommendations for the vehicle front end for side (lateral) deflections in order to minimize the risk of being drawn under the vehicle on flat ground (embedded track),
-   design recommendations for the vehicle body underframe to not aggravate injuries to a pedestrian/body lying on the ground,
-   recommendations to prevent the pedestrian from being over-run by the leading wheels of the vehicle.
The following measures to actively improve safety are not in the Scope of this document:
-   colour of front;
-   additional position lights;
-   additional cameras;
-   driver assistance systems;
-   additional acoustic warning devices, etc.;
-   view of the driver / mirrors;
-   consequences for pedestrian injuries due to secondary impact with infrastructure (side posts, concrete ground, poles, trees, etc.).
The recommendations of this document only apply to new vehicles.

  • Technical report
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15153-4:2020(Main)
Railway applications - External visible and audible warning devices - Part 4: Audible warning devices for urban rail
EN 15153-4:2020

This European Standard defines the acoustic requirements and the test requirements for warning horns, bells (single and recurring sound) and whistles for urban rail vehicles as defined in the CEN CENELEC Guide 26, i.e. metro systems, trams, light rail, and 'local rail' systems. Additionally, the requirements for 'tram/trains' are included.
NOTE   The requirements for audible warning devices for mainline rail are found in prEN 15153-2.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15153-3:2020(Main)
Railway applications - External visible and audible warning devices - Part 3: Visible warning devices for urban rail
EN 15153-3:2020

This European Standard defines the functional and technical requirements for exterior visible warning devices for urban rail vehicles as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems.
This European Standard also defines the requirements for testing and conformity assessment.
NOTE   The requirements for exterior visible warning devices for mainline rail are found in prEN 15153-1.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13272-2:2020(Main)
Railway applications - Electrical lighting for rolling stock in public transport systems - Part 2: Urban rail
EN 13272-2:2019

This European Standard contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. Metro Systems, Trams, Light Rail, and Local Rail Systems, under all operating and emergency conditions.
This European Standard also defines the requirements for testing and conformity assessment.
This European Standard does not address lighting installed in instruments or controls.
This European Standard does not address lighting installed for indication purposes, including flashing lights and effect lighting.
NOTE 1   The requirements for interior lighting for trains can be found in prEN 13272-1
NOTE 2   The requirements for cab instrument lighting can be found in EN 16186-2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50206-2:2011(Main)
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
EN 50206-2:2010

This European Standard defines the general assembly characteristics which are to be applied to
pantographs, to enable current collection from the overhead line equipment. It also defines the tests the pantographs have to perform, excluding insulators.
This European Standard does not apply to pantograph dielectric tests, which are to be performed on the pantograph installed on the vehicle roof. If no other requirement is agreed between customer and supplier, insulation coordination according to EN 50124-1 may be used.
This European Standard does not apply to pantographs used on main line vehicles: these pantographs are considered in EN 50206-1.
This European Standard relates to conventional suspended overhead line equipment and accessories.
The systems (or part of them) which are rigidly suspended will require special consideration between the customer and the supplier.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day