Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable assemblies for radio and TV receivers - Frequency range up to 3000 MHz, Screening class A++, IEC 61169-47 connectors (IEC 60966-2-8:2022)

This part of IEC 60966 is a detail specification that applies to cable assemblies with F-Quick
connectors (see IEC 61169-47) and requires quad-shield screening class A++ (see
IEC 61196-6-5). This detail specification applies to the cable assemblies for radio and TV
receivers

Konfektionierte Koaxial- und Hochfrequenzkabel – Teil 2-8: Teil 2-8: Bauartspezifikation für konfektionierte Kabel für Rundfunk- und Fernsehempfänger – Frequenzbereich 0 MHz bis 3000 MHz, Abschirmklasse A++, Steckverbinder nach IEC 61169-47 (IEC 60966-2-8:2022)

Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 2-8: Spécification particulière pour cordons de connexion de récepteurs radio ou TV - Plage de fréquences jusqu’à 3000 MHz, Classe d'écrantage A++, connecteurs IEC 61169-47 (IEC 60966-2-8:2022)

IEC 60966-2-8:2022 est une spécification particulière qui s'applique aux cordons avec des connecteurs F-Quick (voir IEC 61169-47) et exige un quadruple blindage de classe d’écrantage A++ (voir l’IEC 61196-6-5). La présente spécification particulière s’applique aux cordons de connexion de récepteurs de télévision ou radio. La présente spécification particulière donne les exigences et les sévérités de sous-famille qui doivent être appliquées.

Sestavi radiofrekvenčnih in koaksialnih kablov - 2-8. del: Podrobna specifikacija za kabelske sestave za radijske in TV sprejemnike - Frekvenčno območje do 3000 MHz, zaslonski razred A++, konektorji po standardu IEC 61169-47 (IEC 60966-2-8:2022)

Ta del standarda IEC 60966 je podrobna specifikacija, ki se uporablja za kabelske sestave s konektorji F-Quick (glej standard IEC 61169-47) in zahteva zaslonski razred A++ s četverno zaščito (glej standard IEC 61196-6-5). Ta podrobna specifikacija se uporablja za kabelske sestave za radijske in televizijske sprejemnike.

General Information

Status
Published
Publication Date
04-Sep-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Aug-2022
Due Date
16-Oct-2022
Completion Date
05-Sep-2022

Buy Standard

Standard
EN IEC 60966-2-8:2022 - BARVE
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60966-2-8:2022
01-oktober-2022
Sestavi radiofrekvenčnih in koaksialnih kablov - 2-8. del: Podrobna specifikacija za
kabelske sestave za radijske in TV sprejemnike - Frekvenčno območje do 3000
MHz, zaslonski razred A++, konektorji po standardu IEC 61169-47 (IEC 60966-2-
8:2022)
Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable
assemblies for radio and TV receivers - Frequency range up to 3000 MHz, Screening
class A++, IEC 61169-47 connectors (IEC 60966-2-8:2022)
Konfektionierte Koaxial- und Hochfrequenzkabel – Teil 2-8: Teil 2-8: Bauartspezifikation
für konfektionierte Kabel für Rundfunk- und Fernsehempfänger – Frequenzbereich 0
MHz bis 3000 MHz, Abschirmklasse A++, Steckverbinder nach IEC 61169-47 (IEC
60966-2-8:2022)
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 2-8: Spécification
particulière pour cordons de connexion de récepteurs radio ou TV - Plage de fréquences
jusqu’à 3000 MHz, Classe d'écrantage A++, connecteurs IEC 61169-47 (IEC 60966-2-
8:2022)
Ta slovenski standard je istoveten z: EN IEC 60966-2-8:2022
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN IEC 60966-2-8:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60966-2-8:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60966-2-8:2022


EUROPEAN STANDARD EN IEC 60966-2-8

NORME EUROPÉENNE

EUROPÄISCHE NORM August 2022
ICS 33.120.01

English Version
Radio frequency and coaxial cable assemblies - Part 2-8: Detail
specification for cable assemblies for radio and TV receivers -
Frequency range up to 3000 MHz, Screening class A++, IEC
61169-47 connectors
(IEC 60966-2-8:2022)
Cordons coaxiaux et cordons pour fréquences Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-8:
radioélectriques - Partie 2-8: Spécification particulière pour Teil 2-8: Bauartspezifikation für konfektionierte Kabel für
cordons de connexion de récepteurs radio ou TV - Plage de Rundfunk- und Fernsehempfänger - Frequenzbereich 0
fréquences jusqu'à 3000 MHz, Classe d'écrantage A++, MHz bis 3000 MHz, Schirmungsklasse A++, Steckverbinder
connecteurs IEC 61169-47 nach IEC 61169-47
(IEC 60966-2-8:2022) (IEC 60966-2-8:2022)
This European Standard was approved by CENELEC on 2022-07-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60966-2-8:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60966-2-8:2022
EN IEC 60966-2-8:2022 (E)
European foreword
The text of document 46/890/FDIS, future edition 1 of IEC 60966-2-8, prepared by IEC/TC 46 "Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60966-2-8:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-22
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60966-2-8:2022 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60966-2-8:2022
EN IEC 60966-2-8:2022 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60966-1 2019 Radio frequency and coaxial cable EN IEC 60966-1 2019
assemblies - Part 1: Generic specification -
General requirements and test methods
IEC 60966-2-1 - Radio frequency and coaxial cable EN 60966-2-1 -
assemblies - Part 2-1: Sectional
specification for flexible coaxial cable
assemblies
IEC 60966-2-2 - Radio frequency and coaxial cable EN 60966-2-2 -
assemblies - Part 2-2: Blank detail
specification for flexible coaxial cable
assemblies
IEC 61169-47 - Radio-frequency connectors - Part 47: EN 61169-47 -
Sectional specification for radio-frequency
coaxial connectors with clamp coupling,
typically for use in 75 Ω cable networks
(type F-Quick)
IEC 61196-1-101 - Coaxial communication cables - Part 1- - -
101: Electrical test methods - Test for
conductor d.c. resistance of cable
IEC 61196-6-5 2020 Coaxial communication cables - Part 6-5: - -
Detail specification for Type A quad-shield
CATV drop cables with screening class
A++
IEC 62153-4-7 - Metallic cables and other passive EN IEC 62153-4-7 -
components test methods - Part 4-7:
Electromagnetic compatibility (EMC) -Test
method for measuring of transfer
impedance Z and screening attenuation
T
aS or coupling attenuation aC of connectors
and assemblies - Triaxial tube in tube
method

3

---------------------- Page: 5 ----------------------
SIST EN IEC 60966-2-8:2022

---------------------- Page: 6 ----------------------
SIST EN IEC 60966-2-8:2022




IEC 60966-2-8

®


Edition 1.0 2022-06




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE
colour

inside










Radio frequency and coaxial cable assemblies –

Part 2-8: Detail specification for cable assemblies for radio and TV receivers –

Frequency range up to 3 000 MHz, Screening class A++, IEC 61169-47

connectors



Cordons coaxiaux et cordons pour fréquences radioélectriques –


Partie 2-8: Spécification particulière pour cordons de connexion de récepteurs

radio ou TV – Plage de fréquences jusqu’à 3000 MHz, Classe d'écrantage A++,

connecteurs IEC 61169-47











INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.120.01 ISBN 978-2-8322-3871-4




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 60966-2-8:2022
– 2 – IEC 60966-2-8:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Detail specification . 7
Annex A (informative) Identification and marking . 11
A.1 Identification – Type name . 11
A.2 Marking . 11

Table A.1 – Variants of connector . 11

---------------------- Page: 8 ----------------------
SIST EN IEC 60966-2-8:2022
IEC 60966-2-8:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –

Part 2-8: Detail specification for cable assemblies for radio and
TV receivers – Frequency range up to 3 000 MHz, Screening class A++,
IEC 61169-47 connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.