oSIST prEN 13001-3-5:2024

Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

This document covers the following parts of hooks and types of hooks:
-   bodies of any type of hooks made of steel forgings or steel castings, including stainless steel;
-   machined shanks of hooks with a thread/nut suspension.
Plate hooks, which are those assembled of one or several parallel parts of rolled steel plates, are not covered.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are intended to reduce or eliminate the risks associated with the following hazards:
a)   exceeding the limits of yield strength, ultimate strength, fatigue strength, brittle fracture;
b)   exceeding temperature limits of material.
This document is not applicable to hooks installed in cranes manufactured before the date of its publication and serves as a reference base for product standards for particular crane types.
This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1:2015.

Krane - Konstruktion allgemein - Teil 3-5: Grenzzustände und Sicherheitsnachweis von geschmiedeten und gegossenen Haken

Dieses Dokument gilt für folgende Hakenteile und Hakenarten:
-   alle Arten von geschmiedeten oder gegossenen Hakenkörpern aus Stahl, einschließlich Edelstahl;
-   maschinell bearbeitete Hakenschäfte mit Gewinde/Mutter-Aufhängung.
Plattenhaken, d. h. Haken, die aus einem oder mehreren parallelen Teilen aus gewalzten Stahlplatten zusammengesetzt sind, fallen nicht darunter.
Im Folgenden sind signifikante Gefährdungssituationen und Gefährdungsereignisse aufgeführt, die bei normalem Gebrauch und vorhersehbarer Fehlanwendung zu Risiken für den Menschen führen könnten. Abschnitt 4 bis Abschnitt 8 dieses Dokuments sind notwendig, um Risiken, die mit nachfolgend genannten Gefährdungen verbunden sind, zu reduzieren oder zu beseitigen:
a)   Überschreiten der Grenzwerte von Streckgrenze, Bruchfestigkeit, Ermüdungsfestigkeit, Sprödbruch;
b)   Überschreiten der Temperaturgrenzwerte des Werkstoffs.
Dieses Dokument gilt für Haken, die in Kränen eingebaut sind, die nach dem Datum der Annahme dieser Europäischen Norm durch CEN hergestellt werden, und dient als Referenzgrundlage für Produktnormen bestimmter Krantypen.
Dieser Teil von EN 13001 befasst sich nur mit dem Grenzzustandsverfahren nach EN 13001-1:2015.

Appareils de levage à charge suspendue - Conception générale - Partie 3-5 : États limites et vérification des crochets forgés et moulés

Le présent document couvre les composants de crochets et types de crochets suivants :
-   corps de tout type de crochets en acier forgé ou en acier moulé, incluant des aciers inoxydables ;
-   tiges usinées de crochets à suspension par vis/écrou.
Les crochets lamellaires constitués de l’assemblage d’une ou de plusieurs tôles en acier laminé ne sont pas couverts.
La liste suivante spécifie les situations dangereuses et les évènements dangereux significatifs susceptibles d’entraîner des risques pour les personnes lors d’une utilisation normale ou d’une mauvaise utilisation prévisible. Les Articles 4 à 8 du présent document sont destinés à réduire ou éliminer les risques associés aux phénomènes dangereux suivants :
a)   dépassement de la limite d’élasticité, de la résistance à la rupture, de la résistance à la fatigue, de la résistance à la rupture fragile ;
b)   dépassement des limites de température du matériau.
Le présent document ne s’applique pas aux crochets installés sur des appareils de levage à charge suspendue construits avant la date de sa publication et sert de référence pour les normes produit des types particuliers d’appareils de levage à charge suspendue.
La présente partie de l’EN 13001 traite uniquement de la méthode des états limites selon l’EN 13001-1:2015.

Žerjavi - Konstrukcija, splošno - 3-5. del: Mejna stanja in dokaz varnosti kovanih in litih kavljev

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Jul-2024
• ICS: 53.020.20 - Cranes
• ICS: 53.020.30 - Accessories for lifting equipment
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 08-May-2024
• Due Date: 25-Sep-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 2023/1230 - Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery and repealing Directive 2006/42/EC of the European Parliament and of the Council and Council Directive 73/361/EEC (Text with EEA relevance)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: prEN 13001-3-5 - Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

Relations

• Revises: SIST EN 13001-3-5:2016+A1:2021 - Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
• Effective Date: 05-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13001-3-5:2024
01-julij-2024
Žerjavi - Konstrukcija, splošno - 3-5. del: Mejna stanja in dokaz varnosti kovanih in
litih kavljev
Cranes - General design - Part 3-5: Limit states and proof of competence of forged and
cast hooks
Krane - Konstruktion allgemein - Teil 3-5: Grenzzustände und Sicherheitsnachweis von
geschmiedeten und gegossenen Haken
Appareils de levage à charge suspendue - Conception générale - Partie 3-5 : États
limites et vérification des crochets forgés et moulés
Ta slovenski standard je istoveten z: prEN 13001-3-5
ICS:
53.020.20 Dvigala Cranes
53.020.30 Pribor za dvigalno opremo Accessories for lifting
equipment
oSIST prEN 13001-3-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13001-3-5:2024

---------------------- Page: 2 ----------------------
oSIST prEN 13001-3-5:2024


DRAFT
EUROPEAN STANDARD
prEN 13001-3-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2024
ICS 53.020.30; 53.020.20 Will supersede EN 13001-3-5:2016+A1:2021
English Version

Cranes - General design - Part 3-5: Limit states and proof
of competence of forged and cast hooks
Appareils de levage à charge suspendue - Conception Krane - Konstruktion allgemein - Teil 3-5:
générale - Partie 3-5 : États limites et vérification des Grenzzustände und Sicherheitsnachweis von
crochets forgés et moulés geschmiedeten und gegossenen Haken
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 147.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13001-3-5:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13001-3-5:2024
prEN 13001-3-5:2024 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions, symbols and abbreviations . 9
3.1 Terms and definitions . 9
3.2 Symbols and abbreviations . 10
4 General requirements . 13
4.1 Materials . 13
4.1.1 General .
...