iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS CEN ISO/TS 14907-1:2010/AC:2013

(Corrigendum)

Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010/Cor 1:2010)

Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010/Cor 1:2010)

This part of ISO/TS 17575 defines how to convey all or parts of the data element structure defined in ISO/TS 17575-1 over any communication stack and media suitable for this application. It is focussed on mobile communication links. However, wired links shall use the same methodology. To establish a link to a sequence of service calls initializing the communication channel, addressing the reception of the message and forwarding the payload are required. The required communication medium independent services are part of the definition of this part of ISO/TS 17575, represented by an abstract API. The communication interface shall be implemented as an API in the programming environment of choice for the Front End (FE) system. The definition of this API in concrete terms is outside of the scope of this part of ISO/TS 17575. This part of ISO/TS 17575 specifies an abstract API that defines the semantics of the concrete API. An example concrete API is presented in Annex C. Where no distinction is made between the abstract and concrete communications APIs, the term “communications API” or just “API”, can be used.

Telematik für den Straßenverkehr und den Transport - Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von Testverfahren

Télématique de la circulation et du transport routier - Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 1: Description des modes opératoires (ISO/TS 14907-1:2010/Cor 1:2010)

Cestna transportna in prometna telematika - Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 1. del: Opis preskuševalnih postopkov (ISO/TS 14907-1:2010/Cor 1:2010)

Ta del ISO/TS 17575 določa, kako prenesti vse dele strukture podatkovnega elementa, ki je določen v ISO/TS 17575-1, skozi kateri koli komunikacijski odvodnik in medij, primeren za to uporabo. Osredotočen je na mobilne komunikacijske povezave. Vseeno se za žične povezave uporablja enaka metodologija. Za vzpostavitev povezave do sekvence storitvenih klicev, ki inicializirajo komunikacijski kanal, je potrebno obravnavati sprejem sporočila in posredovanje tovora. Zahtevane srednje neodvisne komunikacijske storitve so del definicije tega dela ISO/TS 17575, predstavljene s povzetkom API. Komunikacijska povezava bo izvedena kot API v programskem okolju po izbiri za čelni del (FE) sistema. Definicija API v konkretnih izrazih je zunaj področja uporabe tega dela ISO/TS 17575. Ta del ISO/TS 17575 določa povzetek API, ki določa semantiko konkretnega API. Primer konkretnega API je predstavljen v dodatku C. Kjer ni nobene razlike med povzetkom in konkretnim komunikacijskim API, se lahko uporablja izraz »komunikacijski API« ali pa samo »API«.

General Information

Status
Withdrawn
Publication Date
12-Feb-2013
Withdrawal Date
29-Oct-2015
ICS
35.240.60 - IT applications in transport
43.040.15 - Car informatics. On board computer systems
Technical Committee
ITC - Information technology
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2015
Due Date
24-Oct-2015
Completion Date
23-Oct-2015
Mandate
M/018 - Standardization Mandate forwarded to CEN/CENELEC/ETSI in the field of Information Technology and Telecommunications concerning Road Transport and Traffic Telematics
Ref Project
CEN ISO/TS 14907-1:2010/AC:2010 - Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010/Cor 1:2010)

Relations

Replaced By
SIST-TS CEN ISO/TS 14907-1:2015 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)
Effective Date
01-Dec-2015
Corrects
SIST-TS CEN ISO/TS 14907-1:2010 - Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010)
Effective Date
08-Jun-2022

Buy Standard

TS CEN ISO/TS 14907-1:2010/AC:2013TS CEN ISO/TS 14907-1:2010/AC:2013
PreviousNext
Corrigendum
TS CEN ISO/TS 14907-1:2010/AC:2013
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cestna transportna in prometna telematika - Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 1. del: Opis preskuševalnih postopkov (ISO/TS 14907-1:2010/Cor 1:2010)Telematik für den Straßenverkehr und den Transport - Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von TestverfahrenTélématique de la circulation et du transport routier - Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 1: Description des modes opératoires (ISO/TS 14907-1:2010/Cor 1:2010)Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010/Cor 1:2010)43.040.15Car informatics. On board computer systems35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and tradeICS:Ta slovenski standard je istoveten z:CEN ISO/TS 14907-1:2010/AC:2010SIST-TS CEN ISO/TS 14907-1:2010/AC:2013en,fr,de01-marec-2013SIST-TS CEN ISO/TS 14907-1:2010/AC:2013SLOVENSKI
STANDARD



SIST-TS CEN ISO/TS 14907-1:2010/AC:2013



TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION
CEN ISO/TS 14907-1:2010/AC
September 2010
Septembre 2010
September 2010 ICS 43.040.15; 35.240.60 English version Version Française Deutsche Fassung
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010/Cor 1:2010)
Télématique de la circulation et du transport routier - Perception du télépéage -Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 1: Description des modes opératoires (ISO/TS 14907-1:2010/Cor 1:2010)
Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO/TS 14907-1:2010/Cor 1:2010) This corrigendum becomes effective on 1 September 2010 for incorporation in the three official language versions of the TS.
Ce corrigendum prendra effet le 1 septembre 2010 pour incorporation dans les trois versions linguistiques officielles de la TS.
Die Berichtigung tritt am 1.September 2010 zur Einarbeitung in die drei offiziellen Sprachfassungen der TS in K
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15876:2023(Main)
Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509
EN 15876:2023

It defines the test suite structure and the test purposes for conformity evaluation of on-board and roadside equipment designed for compliance with the requirements set up in EN 15509.

  • Standard
    122 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    147 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17249-5:2022(Main)
Intelligent transport systems - eSafety - Part 5: eCall for UNECE category L1 and L3 powered two-wheeled vehicles
CEN/TS 17249-5:2022

In respect of 112-eCall (operating requirements defined in EN 16072), this document defines adaptations to eCall specifications defined in EN 16072 and other related documents to enable the provision of eCall for Powered Two Wheel Vehicles.
As with the existing provisions for eCall for Category M1/N1 vehicles, these are specified within the paradigm of being OEM fit equipment supplied with new vehicles.
For the purposes of the present document, the P2WV ‘L’ categories, as defined in Directive 2002/24/EC, Regulation (EU) No 168/2013, UNECE and as referenced/specified in EN 15722 apply.
This document includes only the requirements for Category L1 and L3 P2WV (vehicle based) with the exception of L1e-A (powered cycle), although other documents may subject other ‘L’ subcategories to use this document. Other Technical Specifications may be prepared for other UNECE category ‘L’ variants.
This document is a revision of CEN/TS 17249-5:2019 based on results achieved in sAFE project (sub-activity 3.5) [11] to obtain a specification allowing a more practical implementation of eCall for P2WVs.
The specifications herein relate only to the provision of pan-European eCall, and does not provide specifications for third party service provision of eCall. Other than in the 112-eCall paradigm, which involves a direct call from the vehicle to the most appropriate PSAP, third party service provision involves the support of an intermediary third party service provider before the call is forwarded to the PSAP.
NOTE   The provision of eCall for vehicles via the aftermarket (post sales and registration), and the operational requirements for any such aftermarket solution. will be the subject of other work, that will use the specifications of this document as a principle reference point.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14907-2:2021(Main)
Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO 14907-2:2021)
EN ISO 14907-2:2021

This document describes tests which verify on-board unit (OBU) conformance of functions and data
structures implementations, as defined in the implementation conformance statement (ICS) based on
ISO 14906 for EFC applications.
This document defines tests for assessing OBU conformance in terms of :
— basic dedicated short-range communication (DSRC) L7 functionality,
— EFC application functions,
— EFC attributes (i.e. EFC application information),
— the addressing procedures of EFC attributes and (hardware) components,
— the EFC transaction model, which defines the common elements and steps of any EFC transaction, and
— the behaviour of the interface so as to support interoperability on an EFC-DSRC application
interface level.
After the tests of isolated data items and functions (C.2 to C.4), an example is given for testing a
complete EFC transaction (C.3). Although this document defines examples of test cases for DSRC
and EFC functionality (see Annex C), it does not intend to specify a complete test suite for a certain
implementation. To compose a test suite for a specific EFC implementation, the test cases can be
modified and new test cases can be defined and added in order for the conformance test suite to be
complete. It can be useful to consider the following when defining a complete test suite:
— small range: “exhaustive testing” of critical interoperability/compatibility features,
— large range: testing of boundaries and random values, and
— composite types: testing of individual items in sequence or parallel.
This document does not define tests which assess:
— performance,
— robustness, and
— reliability of an implementation.
NOTE 1 ISO 14907-1 defines test procedures that are aimed at assessing performance, robustness and
reliability of EFC equipment and systems.
NOTE 2 The ISO/IEC 10373 series defines test methods for proximity, vicinity, integrated circuit(s) cards and
related devices that can be relevant for OBUs which support such cards.
Annex D provides an informative overview of Japanese on-board equipment (OBE) conformance tests
which are based on the ISO 14907 series, in order to illustrate how these can be applied in practice.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 19321:2021(Main)
Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structures (ISO/TS 19321:2020)
CEN ISO/TS 19321:2020

This document specifies the in-vehicle information (IVI) data structures that are required by different
intelligent transport system (ITS) services for exchanging information between ITS Stations (ITS-S).
A general, extensible data structure is specified, which is split into structures called containers to
accommodate current-day information. Transmitted information includes IVI such as contextual
speed, road works warnings, vehicle restrictions, lane restrictions, road hazard warnings, locationbased
services, re-routing. The information in the containers is organized in sub-structures called data
frames and data elements, which are described in terms of its content and its syntax.
The data structures are specified as communications agnostic. This document does not provide the
communication protocols. This document provides scenarios for usage of the data structure, e.g. in case
of real time, short-range communications.

  • Technical specification
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13143-1:2021(Main)
Electronic fee collection - Evaluation of onboard and roadside equipment for conformity to ISO 12813 - Part 1: Test suite structure and test purposes (ISO 13143-1:2020)
EN ISO 13143-1:2020

This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluating the
conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO 12813.
It provides a basis for conformance tests for dedicated short-range communication (DSRC) OBE and
RSE to support interoperability between different equipment supplied by different manufacturers.
ISO 12813 defines requirements on the compliance check communication (CCC) interface level, but
not for the RSE or OBE internal functional behaviour. Consequently, tests regarding OBE and/or RSE
functional behaviour remain outside the scope of this document.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14907-1:2020(Main)
Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO 14907-1:2020)
EN ISO 14907-1:2020

This document specifies the test procedures of electronic fee collection (EFC) roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
The scope of this document is restricted to systems operating within the radio emission, electromagnetic
compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated.
This document identifies a set of suitable parameters and provides test procedures to enable the proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters:
— functionality;
— quality;
— referenced pre-tests.
An overview of the tests and parameters provided by this document is given in 5.1 and 5.2.
This document describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC equipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken.
It is assumed that the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this document provide instructions to evaluate the test results.
This document defines only the tests and test procedures, not the benchmark figures that these are to be measured against. The test procedures defined in this document can be used as input, e.g. by scheme owners, for prototype testing, type approvals, tests of installations and periodic inspections.
Related to a conceptual model of an EFC system, this document relates only to the equipment of the user and the service provider. Any other entities are outside the scope of document.
EFC systems for dedicated short-range communication (DSRC) consist, in principle, of a group of technical components, which in combination fulfil the functions required for the collection of fees by electronic automatic means. These components comprise all, or most, of the following:
— OBE within a vehicle;
— OBE containing the communications and computing sub-functions;
— optional integrated circuit card which may carry electronic money, service rights, and other secured information;
— communication between OBE and RSE based on DSRC;
— equipment for the fee collection at the RSE containing the communications and computing subfunctions;
— equipment for the enforcement at the roadside;
— central equipment for the administration and operation of the system.
The scope of this document relates solely to OBE and RSE and the DSRC interface between OBE and RSE including its functions to perform the fee collection. All the equipment used for enforcement (e.g. detection, classification, localization, and registration) and central equipment are outside the scope of this document.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-11:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 11: Vehicle platform interface service
CEN/TS 13149-11:2020

The CEN 13149 series of products concerns on-board data communication systems on public transport vehicles. This series provides for data services that enable open and managed sharing of relevant information.
This document, being Part 11 of the series, specifies a publication service for data provided by the vehicle platform, enabling all on-vehicle services to share a common understanding of the operational activity of the vehicle, based on inputs taken from chassis systems such as the J1939 CAN bus. It covers:
-   the functional scope, i.e. which data the service provides, why, when and how often.
-   the transport protocol, i.e. how the data are transmitted.
-   the service publication, i.e. how the service can be found by other modules or applications
-   the structure of the data, i.e. how the data are structured and how the data elements are named.
This document implements the service framework described in FprCEN/TS 13149-7.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-9:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 9: Time service
CEN/TS 13149-9:2020

The CEN 13149 series of products concerns on-board data communication systems on public transport vehicles. This series provides for data services that enable open and managed sharing of relevant information.
This document, being Part 9 of the series, specifies a time publication, enabling all on-vehicle services to share a common understanding of current time, based on a suitable agreed master network clock. It covers:
-   the functional scope, i.e. which data the service provides, why, when and how often.
-   the transport protocol, i.e. how the data are transmitted.
-   the service publication, i.e. how the service can be found by other modules or applications
-   the structure of the data, i.e. how the data are structured and how the data elements are named.
This document implements the service framework described in FprCEN/TS 13149-7.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-10:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 10: Location service
CEN/TS 13149-10:2020

The CEN 13149 series of products concerns on-board data communication systems on public transport vehicles. This series provides for data services that enable open and managed sharing of relevant information.
This document, being Part 10 of the series, specifies a location publication, enabling all on-vehicle services to share a common understanding of the location and orientation of the vehicle, based on inputs taken from global navigational satellite systems (GNSS) such as GPS and Galileo. It covers:
-   the functional scope, i.e. which data the service provides, why, when and how often;
-   the transport protocol, i.e. how the data are transmitted;
-   the service publication, i.e. how the service can be found by other modules or applications;
-   the structure of the data, i.e. how the data are structured and how the data elements are named.
This document implements the service framework described in FprCEN/TS 13149-7.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-7:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 7: System and network architecture
CEN/TS 13149-7:2020

This document specifies the general rules for an on-board data communication system between the different systems that may be used within public transport vehicles, based on the Internet Protocol (IPv4, [3] and IPv6, [4]). This includes operational support systems, passenger information systems, fare collection systems, etc.
This document describes:
-   the requirements for an on board IP network;
-   the overview architecture and components for an IP based on-board network;
-   the modular structure of the network architecture;
-   the Service Oriented Architecture (SOA) approach, and approach to defining services.
Systems directly related to the safe operation of the vehicle (including propulsion management, brake systems, door opening systems) are excluded from the scope of this document and are dealt with in other standardization bodies. However, the architecture described in this document may be used for support services such as safety information messages. Interfaces to safety-critical systems should be provided through dedicated gateways with appropriate security provisions; for the purposes of this document, these are regarded as simply external information sources.
This document is designed primarily for vehicles with a fixed primary structure, where networks can be installed on a permanent basis and the system configuration task consists largely of the integration, adjustment or removal of the functional end systems that produce and/or consume data. Public transport vehicles consisting of units linked temporarily for operational purposes (specifically, trains in which individual engines, cars or consists are routinely connected and disconnected) require additional mechanisms to enable the communications network itself to reconfigure. Such mechanisms are provided through other standards, notably the IEC 61375 series [5].

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day