SIST EN 62841-3-12:2019/A1:2026

• Abstract:

  2020-12-24: Common mods to this prA1 are included in prAB (PR=73281) for simultaneous circulation; D164/C043: DOW=DOR+48 months

• Status: Published
• Publication Date: 13-Sep-2026
• ICS: 25.100.50 - Taps and threading dies
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Sep-2026
• Due Date: 09-Nov-2026
• Completion Date: 14-Sep-2026
• Directive: Harmonized Standard2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive:

  ---

  Not Harmonized2023/1230 - Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery and repealing Directive 2006/42/EC of the European Parliament and of the Council and Council Directive 73/361/EEC (Text with EEA relevance)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/605 - COMMISSION IMPLEMENTING DECISION of 20.1.2025 on a standardisation request to the European Committee for Standardization and to the European Committee for Electrotechnical Standardization as regards machinery and related products in support of Regulation (EU) 2023/1230 of the European Parliament and of the Council
• Ref Project: EN 62841-3-12:2019/A1:2026 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines

• Amends: SIST EN 62841-3-12:2019 - Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017)
• Effective Date: 01-Oct-2026
• Amended By: SIST EN 62841-3-12:2019/A11:2026 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines
• Effective Date: 01-Oct-2026

SLOVENSKI STANDARD
01-oktober-2026
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-
12. del: Posebne zahteve za prenosne rezalnike navojev - Dopolnilo A1 (IEC 62841-
3-12:2017/AMD1:2021)
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-12: Particular requirements for transportable threading
machines (IEC 62841-3-12:2017/AMD1:2021)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen – Sicherheit - Teil 3-12: Besondere Anforderungen für
transportable Gewindeschneidmaschinen (IEC 62841-3-12:2017/AMD1:2021)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-12: Exigences particulières relatives aux machines à fileter portables
(IEC 62841-3-12:2017/AMD1:2021)
Ta slovenski standard je istoveten z: EN 62841-3-12:2019/A1:2026
ICS:
25.100.50 Navojna rezalna orodja Taps and threading dies
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62841-3-12:2019/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2026
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-12: Particular
requirements for transportable threading machines
(IEC 62841-3-12:2017/AMD1:2021)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-12: Exigences transportable Werkzeuge und Rasen- und
particulières relatives aux machines à fileter portables Gartenmaschinen - Sicherheit - Teil 3-12: Besondere
(IEC 62841-3-12:2017/AMD1:2021) Anforderungen für transportable
Gewindeschneidmaschinen
(IEC 62841-3-12:2017/AMD1:2021)
This amendment A1 modifies the European Standard EN 62841-3-12:2019; it was approved by CENELEC on 2021-09-02. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-12:2019/A1:2026 E

European foreword
The text of document 116/488/CDV, future edition 1 of IEC 62841-3-12/AMD1, prepared by TC 116
"Safety of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62841-3-12:2019/A1:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-08-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2030-08-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of
EN 62841-3-12:2019/A11:2026.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62841-3-12:2017/AMD1:2021 was approved by CENELEC
as a European Standard without any modification.

IEC 62841-3-12 ®
Edition 1.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Electric motor-operated hand-held tools, transportable tools and lawn
and garden machinery – Safety –
Part 3-12: Particular requirements for transportable threading ma
...