SIST EN 1348:2007
(Main)Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives.
This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.
Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außen
Colles a carrelage - Détermination de l'adhérence par traction des mortiers-colles
La présente Norme européenne spécifie une méthode de détermination de l’adhérence par traction des mortiers-colles pour carreaux céramiques.
Elle s’applique à tous les mortiers-colles dont ceux comprenant des composants séparés pour la pose des carreaux céramiques sur les murs et les sols intérieurs ou extérieurs.
La présente Norme européenne ne contient pas d’exigences de performance, ni de recommandations pour la conception et la pose des carreaux céramiques.
NOTE Les colles pour carreaux céramiques peuvent également être utilisées pour d’autres types de carrelages (carreaux de pierres naturelles ou de pierres reconstituées etc.) lorsqu’elles sont compatibles.
Lepila za ploščice - Ugotavljanje natezne adhezijske trdnosti cementnih lepil
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesivesColles a carrelage - Détermination de l'adhérence par traction des mortiers-collesMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außenTa slovenski standard je istoveten z:EN 1348:2007SIST EN 1348:2007en,fr,de91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:SIST EN 1348:1998/A1:2000SIST EN 1348:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1348:200701-december-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1348August 2007ICS 83.180; 91.100.10Supersedes EN 1348:1997
English VersionAdhesives for tiles - Determination of tensile adhesion strengthfor cementitious adhesivesColles à carrelage - Détermination de l'adhérence partraction des mortiers-collesMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder Haftfestigkeit zementhaltiger Mörtel für innen undaußenThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1348:2007: E
EN 1348:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 5.1 General.4 5.2 Ceramic tiles.5 5.3 Concrete slab.5 6 Apparatus.5 6.1 Weight.5 6.2 Pull-head plates.5 6.3 Tensile testing machine.5 6.4 Air-circulating oven.5 6.5 Notched trowel.5 7 Mixing of the adhesive.5 8 Procedure.6 8.1 Preparation of test units.6 8.2 Initial adhesion strength.6 8.3 Tensile adhesion strength after water immersion.6 8.4 Tensile adhesion strength after heat ageing.7 8.5 Tension adhesion strength after freeze-thaw cycle.7 9 Evaluation and expression of results.7 10 Test report.8
EN 1348:2007 (E) 3 Foreword This document (EN 1348:2007) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. This document supersedes EN 1348:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 1348:2007 (E) 4
1 Scope This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.