SIST-TS CEN/TS 16629:2025
(Main)Energy performance of buildings - Detailed technical rules for the set of EPB-standards
Energy performance of buildings - Detailed technical rules for the set of EPB-standards
This document describes the detailed technical rules to be followed in the development and maintenance of standards intended to support the assessment of the overall energy performance of a building (EPB) using a holistic approach.
This document supports the development and maintenance of a set of EPB standards that provides a systematic, clear, consistent and comprehensive methodology for the benefit of professionals and government entities. The main application is the assessment of the overall energy performance of a building in the context of building regulations, e.g. to specify EP requirements, EP rating and EP certificates.
The rules cover general and common aspects on the required quality, accuracy, usability, consistency and interoperability of the EPB standards as a set and individually. For that purpose, this document provides guidance on the process, structure and layout of these EPB standards and accompanying publications, complementary to the CEN and ISO internal regulations.
This document is based on the basic principles given in CEN/TS 16628, and is complemented by the overarching EPB standard, EN ISO 52000 1 and supporting documents.
Energieeffizienz von Gebäuden - Detaillierte technische Regeln für das EPB-Normenpaket
Performance énergétique des bâtiments - Règles techniques détaillées pour la série de normes sur la performance énergétique des bâtiments
Le présent document décrit les règles techniques détaillées à suivre dans l'élaboration et le maintien à jour des normes destinées à venir à l'appui de l'évaluation de la performance énergétique globale d'un bâtiment (PEB) en utilisant une approche holistique.
Le présent document vient à l'appui de l'élaboration et du maintien à jour d'un ensemble de normes PEB qui fournit une méthodologie systématique, claire, cohérente et complète au profit des professionnels et des organismes publics. La principale application est l'évaluation de la performance énergétique globale d'un bâtiment dans le contexte des règlementations de construction, par exemple pour spécifier les exigences de PE, l'évaluation de la performance énergétique et les certificats de type DPE.
Les règles couvrent les aspects généraux et communs relatifs à la qualité requise, la précision, la facilité d'utilisation, la cohérence et l'interopérabilité des normes PEB en tant qu'ensemble et individuellement. À cette fin, le présent document fournit des recommandations relatives au processus, à la structure et la présentation de ces normes PEB et des publications d'accompagnement, en complément des règlements intérieurs du CEN et de l'ISO.
Le présent document est basé sur les principes fondamentaux fournis dans la CEN/TS 16628, et est complété par la norme cadre PEB, l'EN ISO 52000 1 et les documents complémentaires.
Energijske lastnosti stavb - Podrobna tehnična pravila za skupino standardov EPB
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Energijske lastnosti stavb - Podrobna tehnična pravila za skupino standardov EPB
Energy performance of buildings - Detailed technical rules for the set of EPB-standards
Energieeffizienz von Gebäuden - Detaillierte technische Regeln für das EPB-
Normenpaket
Performance énergétique des bâtiments - Règles techniques détaillées pour la série de
normes sur la performance énergétique des bâtiments
Ta slovenski standard je istoveten z: CEN/TS 16629:2024
ICS:
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN/TS 16629
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
November 2024
TECHNISCHE SPEZIFIKATION
ICS 91.120.10; 91.140.01 Supersedes CEN/TS 16629:2014
English Version
Energy performance of buildings - Detailed technical rules
for the set of EPB-standards
Performance énergétique des bâtiments - Règles Energieeffizienz von Gebäuden - Detaillierte technische
techniques détaillées pour la série de normes sur la Regeln für das EPB-Normenpaket
performance énergétique des bâtiments
This Technical Specification (CEN/TS) was approved by CEN on 14 July 2024 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16629:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction. 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Abbreviations . 8
5 General description . 8
6 Overall coordination . 8
6.1 General . 8
6.2 Cooperation between CEN and ISO, general. 8
6.3 Coordination within CEN . 9
6.4 Coordination within ISO . 9
6.5 Cooperation between CEN and ISO on EPB standards. 10
6.6 Cooperation with adjacent or overlapping standardization areas . 10
7 Coordination regarding the common EPB quality . 11
7.1 Preparation and maintenance of the common EPB quality documents . 11
7.2 Work item proposals . 11
7.3 Preparation of EPB standards . 12
7.4 Maintenance . 12
7.5 Strategic planning . 12
7.6 External communication and marketing . 13
8 Application areas . 13
8.1 General . 13
8.2 Scope of the EPB standards . 13
8.3 Support energy performance regulations . 15
8.4 Energy services . 15
8.5 Building categories . 16
8.6 Different levels of complexities . 16
8.7 EPB assessment process. 16
8.8 Flexibility . 16
8.8.1 General . 16
8.8.2 Innovation and equivalent solutions . 17
8.8.3 Flexibility and adaptability to future needs . 17
8.9 Added values to the market . 17
8.9.1 General . 17
8.9.2 Procedures for tailored rating . 18
8.9.3 Procedures for building and system design . 19
9 Categories of EPB standards . 19
9.1 Modular structure . 19
9.2 Themes and use categories . 21
9.3 Numbering of the EPB documents . 22
10 Aspects related to national implementation . 22
10.1 General . 22
10.2 National choices . 22
10.3 Optional national application document . 23
10.4 Technical information on the set of EPB standards and feedback . 24
11 Common rules to verify the quality and consistency . 24
11.1 General . 24
11.2 Interoperability of each EPB standard . 24
11.3 Verification and demonstration of individual EPB calculation standards . 25
11.4 Relevance, sensitivity and balanced accuracy . 25
11.5 Transparency aspects . 25
11.6 Common example cases . 25
12 Overarching structure of each EPB standard and supporting documents . 25
12.1 Partitioning into documents . 25
12.2 Normative standards and informative accompanying TRs . 26
12.3 Common terms, definitions and symbols . 27
12.4 Common assessment boundaries . 27
12.5 Common building and systems partitioning rules for EPB assessment . 27
12.6 List of technologies to be covered . 27
12.7 Matching calculation time intervals . 27
12.8 Common rules on input values and assumptions . 27
12.9 Common operating assumptions and environment conditions . 29
12.10 Common overarching output . 29
13 Digital transformation . 29
14 Common template and editorial rules for each standard . 29
14.1 General . 29
14.2 Common template of an EPB standard . 29
14.3 Common technical and editorial rules for an EPB standard . 30
14.4 Common template and technical and editorial rules for an accompanying TR . 30
14.5 Common template and technical and editorial rules for a spreadsheet . 30
Annex A (normative) The numbering of the ISO 52000 family . 32
Bibliography . 39
European foreword
This document (CEN/TS 16629:2024) has been prepared by Technical Committee CEN/TC 371 “Energy
performance of Buildings”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 16629:2014.
CEN/TS 16629:2024 includes the following significant technical changes with respect to the previous
editions of CEN/TS 16629:
— The changes in the organization that aims to safeguard the overall quality and consistency of the set
of EPB standards, both in CEN and in ISO.
— Removal of redundant content that, after the publication of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.