SIST EN 10264-1:2012

Steel wire and wire products - Steel wire for ropes - Part 1: General requirements

This part of this European Standard defines the general requirements for wire intended for mechanical ropes.
Additional requirements are given in the following parts of this standard, which are specific to each category of
wire.
This standard specifies:
- dimensional tolerances;
- mechanical characteristics;
- requirements relating to the chemical composition of the steel wire;
- conditions to be satisfied by any coating.

Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine Anforderungen

Der Teil dieser Europäischen Norm legt die allgemeinen Anforderungen an Draht für Seile fest. Zusätzliche Anforderungen sind in weiteren Teilen dieser Norm, die für bestimmte Drahtarten gelten, festgelegt.
Diese Norm betrifft:
-   Maßtoleranzen;
-   mechanische Eigenschaften;
-   Anforderungen an die chemische Zusammensetzung des Stahldrahts;
-   Anforderungen an Überzüge.

Fils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions générales

La présente partie de la présente Norme européenne définit les prescriptions générales relatives aux fils destinés aux câbles. Les exigences complémentaires sont données dans les parties suivantes de la présente norme, spécifiques pour chaque catégorie de fil.
La présente norme spécifie :
-   les tolérances dimensionnelles ;
-   les caractéristiques mécaniques ;
-   les exigences  relatives à la composition chimique des fils d’acier ;
-   les conditions auxquelles un revêtement éventuel doit satisfaire.

Jeklena žica in žični izdelki - Jeklena žica za vrvi - 1. del: Splošne zahteve

Ta del tega evropskega standarda določa splošne zahteve za žico, namenjeno za mehanske jeklene vrvi. Dodatne zahteve so določene v naslednjih delih tega evropskega standarda, ki so značilni za vsako kategorijo žic. Ta del tega evropskega standarda določa: – tolerance mer; – mehanske značilnosti; – zahteve, povezane s kemijsko sestavo jeklene žice; – pogoje, ki jih morajo izpolnjevati premazi.

General Information

• Status: Published
• Public Enquiry End Date: 30-Sep-2008
• Publication Date: 19-Jan-2012
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Jan-2012
• Due Date: 25-Mar-2012
• Completion Date: 20-Jan-2012
• Ref Project: EN 10264-1:2012 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements

Relations

• Replaces: SIST EN 10264-1:2003 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
• Effective Date: 01-Mar-2012
• Replaces: SIST EN 10264-1:2003 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine AnforderungenFils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions généralesSteel wire and wire products - Steel wire for ropes - Part 1: General requirements77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10264-1:2012SIST EN 10264-1:2012en,fr,de01-marec-2012SIST EN 10264-1:2012SLOVENSKI
STANDARDSIST EN 10264-1:20031DGRPHãþD



SIST EN 10264-1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10264-1
January 2012 ICS 77.140.65; 21.220.20 Supersedes EN 10264-1:2002English Version
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
Fils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions générales
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine Anforderungen This European Standard was approved by CEN on 19 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10264-1:2012: ESIST EN 10264-1:2012



EN 10264-1:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Information to be supplied by the client .55Characteristics of and requirements for wire .55.1Diameter tolerances .55.2Tensile strength .55.2.1Tensile strength grade - permitted variations .55.2.2Procedure for tensile test .65.3Reverse bend test .65.4Torsion test .65.5Tensile test on knotted wire .65.6Coatings .76Inspection documents .77Sampling and compliance criteria .78Marking .79Protection against corrosion and type of packaging.8Annex A (informative)
Definition of terms relating to sampling and acceptance .9A.1General .9A.2Batch .9A.3Unit, production unit.9A.4Base unit for sampling (m1).9A.5Size of batch (N) .9A.6Sample for testing. 10A.7Sampling length . 10A.8Sampling . 10A.9Sample size (n) . 10A.10Defect . 10A.11Defective length . 10 SIST EN 10264-1:2012



EN 10264-1:2012 (E) 3 Foreword This document (EN 10264-1:2012) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10264-1:2002. This European Standard for wire for ropes is made up of the following parts:  Part 1: General requirements  Part 2: Cold drawn non alloy steel wire for ropes for general applications  Part 3: Round and shaped non alloyed steel wire for high duty applications  Part 4: Stainless steel wire This European Standard has been technically revised to incorporate the following changes: a) other tensile strength grades than those specified in EN 10264 parts 2, 3 and 4, have been allowed subject to an agreement between supplier and user at the time of order (see 5.2.1); b) the length of the test sample given in the procedure for tensile test has been deleted in order to avoid misunderstanding (see 5.2.2); c) the reverse bend test has been allowed for wires under 0,5 mm diameter, subject to an agreement between customer and supplier at the time of order (see 5.3); d) the torsion test has been allowed for wires below 0,5 mm diameter, subject to an agreement between parties (see 5.4); e) additional specifications have been added concerning the result of tensile test on knotted wire (see 5.5); f) the clause on inspection documents has been simplified (see Clause 6); g) for sampling and compliance criteria, the usage of statistical methods has been recommended, in order to reduce the number of tests required (see Clause 7); h) the values of Table 2 "Size of batches and samples and number of results" have been modified as well as the titles of the third and fourth column concerning the number of results for compliance and non-compliance. The footnote b) has also been updated; i) a general clause has been added for explaining the purpose of Annex A "Definition of terms relating to sampling and acceptance". According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 10264-1:2012



EN 10264-1:2012 (E) 4 1 Scope This part of this European Standard defines the general requirements for wire intended for mechanical steel ropes. Additional requirements are given in the following parts of this European Standard, which are specific to each category of wire. This part of this European Standard specifies:  dimensional tolerances;  mechanical characteristics;  requirements relating to the chemical composition of the steel wire;  conditions to be satisfied by any coating. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refe
...