iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1323:1998

(Main)

Adhesives for tiles - Concrete slab for test

Adhesives for tiles - Concrete slab for test

This European Standard specifies the substrate (concrete slab) to be used in the determination of the properties of ceramic tile adhesives. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. Note: Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.).

Mörtel und Klebstoffe für keramische Fliesen und Platten -Betonsplatten

Diese Europäische Norm definiert die Grundlagen für den Untergrund (Betonplatte), der für die Bestummung der Eigenschaften von Mörteln und Klebstoffen für die Verarbeitung Keramischer Fliesen und Platten verwendet wird. Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen für die Verarbeitung von keramischen Fliesen und Platten. Anmerkung: Mörtel und Klebstoffe für keramische Fliesen und Platten können auch für andere Materialarten verwendet werden, (Natur-, Betonwerksteine, usw).

Colles a carrelage - Plaques de béton pour essais

Cette norme européenne prescrit le support (plaque de béton) qui doit etre utilisé pour déterminer les propriétés des colles a carrelage. Cette norme européenne ne contient pas de prescriptions de performances ou de recommandations pour la conception et l'installation de revetements céramiques.Note: les colles a carrelage peuvent aussi etre utilisées pour la pose d'autres  types de carreaux (carreaux de pierres naturelles, carreaux agglomérés, etc).

Lepila za ploščice - Betonska plošča za preskus

General Information

Status
Withdrawn
Publication Date
31-Mar-1998
Withdrawal Date
01-Jul-2007
ICS
83.180 - Adhesives
91.100.10 - Cement. Gypsum. Lime. Mortar
91.100.30 - Concrete and concrete products
Technical Committee
IKER - Ceramics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Jul-2007
Due Date
25-Jul-2007
Completion Date
02-Jul-2007
Directive
89/106/EEC - Construction products
Ref Project
EN 1323:1996 - Adhesives for tiles - Concrete slab for test

Relations

Amended By
SIST EN 1323:1998/A1:2000 - Adhesives for tiles - Concrete slab for test
Effective Date
22-Dec-2008
Replaced By
SIST EN 1323:2007 - Adhesives for tiles - Concrete slabs for tests
Effective Date
01-Oct-2007

Buy Standard

EN 1323:1998EN 1323:1998
PreviousNext
Standard
EN 1323:1998
English language
8 pages
Preview
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1323:1998
01-april-1998
/HSLOD]DSORãþLFH%HWRQVNDSORãþD]DSUHVNXV
Adhesives for tiles - Concrete slab for test
Mörtel und Klebstoffe für keramische Fliesen und Platten -Betonsplatten
Colles a carrelage - Plaques de béton pour essais
Ta slovenski standard je istoveten z: EN 1323:1996
ICS:
83.180 Lepi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
  • Standard
    76 pages
    English language
  • Draft
    76 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 16186-5:2021+A1:2023(Main + Amendment)
Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles
EN 16186-5:2021+A1:2023

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Standard
    20 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 60061-2:1999/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/AMD59:2023)
EN 60061-2:1993/A59:2023
  • Amendment
    19 pages
    English and French language
    e-Library read for
    1 day
  • Draft
    2 pages
    English language
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
  • Amendment
    3 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN IEC 60721-3-4:2019/AC:2023(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations (IEC 60721-3-4:2019/COR1:2023)
EN IEC 60721-3-4:2019/AC:2023-08
  • Corrigendum
    4 pages
    English language
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017

IEC 60050-811:2017 gives the general terminology relating to electric traction used in electrical equipment and systems for railways, as well as general terms pertaining to specific applications and associated technologies. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    626 pages
    English and French language
    e-Library read for
    1 day
  • Standard
    612 pages
    English and French language
SIST
SIST EN 61340-2-3:2016/AC:2023(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)
EN 61340-2-3:2016/AC:2023-08
  • Corrigendum
    4 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 14002-2:2023(Main)
Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
EN ISO 14002-2:2023

This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.

  • Standard
    45 pages
    English language
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    e-Library read for
    1 day