SIST EN 287-2:1996
(Main)Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of aluminium. The recommended format for the certificate of approval testing is given in Annex A. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex C. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. This standard applies to the approval testing of welders for the fusion welding of aluminium using gas in shield. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. This standard does not cover fully mechanized and fully automatic processes (.).1) This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.1) 1. Modified by Amendment A1 :1997
Prüfung von Schweißern - Schmelzschweißen - Teil 2: Aluminium und Aluminiumlegierungen
In dieser Norm werden die wesentlichen Anforderungen, Geltungsbereiche, Prüf- und Bewertungsbedingungen sowie die Prüfungsbescheinigung über die durchgeführte Prüfung des Schweissers für Aluminiumschweissungen festgelegt. Im Anhang A ist der empfohlene Vordruck für die Prüfungsbescheinigung des Schweissers wiedergegeben
Qualification des soudeurs - Soudage par fusion - Partie 2: Aluminium et ses alliages
La présente norme spécifie les prescriptions essentielles a respecter, les domaines de validité, les conditions de contrôle, d'examens et d'essai, les criteres d'acceptation et de notification des résultats de l'épreuve de qualification de soudeurs sur aluminium. La présentation recommandée du certificat de qualification fait l'objet de l'annexe A.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.