SIST EN 16451:2015
(Main)Railway applications - Braking - Brake pad holder
Railway applications - Braking - Brake pad holder
This document specifies requirements for production, production monitoring, design and testing of brake pad holders to be installed on railway vehicles. This document is applicable to brake pad holders produced from cast iron or forged steel. This document is not applicable to brake pad holders made of nonferrous materials. This document is applicable to the brake pad holders which are fitted to rail vehicles of main line railways, private railways, company railways).
Bahnanwendungen - Bremse - Bremsbelaghalter
Die in dieser Europäischen Norm enthaltenen Anforderungen gelten für Bremsbelaghalter für Schienen-fahrzeuge des öffentlichen Verkehrs sowie für Privatbahnen (Regionalbahnen, Werksbahnen). Bremsbelag-halter, die dieser Norm entsprechen, können aus Grau- bzw. Stahlguss oder aus geschmiedetem Stahl sein. Bremsbelaghalter, die aus Nichteisen-Werkstoffen bestehen, werden in dieser Norm nicht behandelt.
Applications ferroviaires - Freinage - Porte-garnitures de frein
Les exigences contenues dans la présente Norme européenne s'appliquent aux porte-garnitures de freins qui équipent les véhicules ferroviaires utilisés par les réseaux principaux nationaux, les réseaux urbains, métropolitains, les tramways et les réseaux privés (chemins de fer régionaux, compagnies privées, etc.). Les porte-garnitures de freins conformes à la présente norme peuvent être en fonte, en acier moulé ou en acier forgé. Les porte-garnitures de freins en matériaux non ferreux ne relèvent pas de la présente norme.
Železniške naprave - Zavore - Nosilec zavorne obloge
Ta dokument določa zahteve za proizvodnjo, nadzor proizvodnje, načrtovanje in preskušanje nosilcev zavornih oblog za namestitev na železniška vozila. Ta dokument velja za nosilce zavornih oblog, ki so izdelani iz litega ali kovanega železa. Ta dokument ne velja za nosilce zavornih oblog iz neželeznih materialov. Ta dokument velja za nosilce zavornih oblog, ki so nameščeni na železniška vozila na glavnih ali zasebnih progah ali progah podjetij.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zavore - Nosilec zavorne oblogeBahnanwendungen - Bremse - BremsbelaghalterApplications ferroviaires - Freinage - Porte-garnitures de freinRailway applications - Braking - Brake pad holder45.040Materiali in deli za železniško tehnikoMaterials and components for railway engineeringICS:Ta slovenski standard je istoveten z:EN 16451:2015SIST EN 16451:2015en,fr,de01-september-2015SIST EN 16451:2015SLOVENSKI
STANDARD
SIST EN 16451:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16451
June 2015 ICS 45.040 English Version
Railway applications - Braking - Brake pad holder
Applications ferroviaires - Freinage - Porte-garnitures
Bahnanwendungen - Bremse - Bremsbelaghalter This European Standard was approved by CEN on 13 May 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16451:2015 ESIST EN 16451:2015
EN 16451:2015 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Symbols and abbreviations .7 5 Design and manufacture .7 5.1 Latch mechanism.7 5.2 Interchangeability by applying same main dimensions and geometry .7 5.2.1 General .7 5.2.2 Interchangeability for “conventional” brake unit .8 5.2.3 Interchangeability for “compact” brake unit .8 5.2.4 Dimensional conformity .8 5.3 Material .8 5.4 Environmental conditions .8 5.4.1 Ambient temperature .8 5.4.2 Other environmental conditions .8 5.5 Loading in the direction of force application .9 5.6 Loading in th
...
SLOVENSKI STANDARD
kSIST FprEN 16451:2015
01-maj-2015
Železniške naprave - Zavore - Nosilec zavorne obloge
Railway applications - Braking - Brake pad holder
Bahnanwendungen - Bremse - Bremsbelaghalter
Applications ferroviaires - Freinage - Porte-garnitures de frein
Ta slovenski standard je istoveten z: FprEN 16451
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
kSIST FprEN 16451:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN 16451:2015
---------------------- Page: 2 ----------------------
kSIST FprEN 16451:2015
EUROPEAN STANDARD
FINAL DRAFT
FprEN 16451
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2015
ICS 45.040
English Version
Railway applications - Braking - Brake pad holder
Applications ferroviaires - Freinage - Porte-garnitures Bahnanwendungen - Bremse - Bremsbelaghalter
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 16451:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN 16451:2015
FprEN 16451:2015 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Symbols and abbreviations .7
5 Design and manufacture .7
5.1 Latch mechanism.7
5.2 Interchangeability by applying same main dimensions and geometry .7
5.2.1 General .7
5.2.2 Interchangeability for “conventional” brake unit .8
5.2.3 Interchangeability for “compact” brake unit .8
5.2.4 Dimensional conformity .8
5.3 Material .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.