Edison screw lampholders (IEC 60238:2004/A1:2008)

This International Standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s. This standard also applies to lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 25 V, to be used indoors, and to lampholders with Edison thread E10 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 60 V, to be used indoors or outdoors. It also applies to lampholders E10 for building-in, for the connection of single lamps to the supply. These lampholders are not intended for retail sale. As far as it reasonably applies, this standard also covers lampholders other than lampholders with Edison thread designed for connection of series-connected lamps to the supply. As far as it reasonably applies, this standard also covers adapters. This standard also covers lampholders which are, wholly or partly, integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals or of the lamp cap, the requirements of the relevant appliance standard shall be observed and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Such lampholders as well as lampholders provided with a snap-on outer shell, for use by luminaire manufacturers only, are not for retail sale. This standard applies to lampholders to be used indoors or outdoors in residential as well as in industrial lighting installations. It also applies to candle lampholders. In locations where special conditions prevail, as for street lighting, on board ships, in vehicles and in hazardous locations, e.g. where explosions are liable to occur, special constructions may be required.

Lampenfassungen mit Edisongewinde (IEC 60238:2004/A1:2008)

Douilles à vis Edison pour lampes (CEI 60238:2004/A1:2008)

Okovi za žarnice in sijalke z Edisonovim navojem (IEC 60238:2004/A1:2008)

General Information

Status
Withdrawn
Publication Date
13-Oct-2008
Withdrawal Date
20-Aug-2017
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Aug-2017
Due Date
13-Sep-2017
Completion Date
21-Aug-2017

Relations

Effective Date
01-Dec-2008
Effective Date
28-Jan-2023
Effective Date
07-Jun-2022

Buy Standard

Amendment
EN 60238:2005/A1:2008
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60238:2005/A1:2008
01-december-2008
Okovi za žarnice in sijalke z Edisonovim navojem (IEC 60238:2004/A1:2008)
Edison screw lampholders (IEC 60238:2004/A1:2008)
Lampenfassungen mit Edisongewinde (IEC 60238:2004/A1:2008)
Douilles à vis Edison pour lampes (CEI 60238:2004/A1:2008)
Ta slovenski standard je istoveten z: EN 60238:2004/A1:2008
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60238:2005/A1:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60238:2005/A1:2008

---------------------- Page: 2 ----------------------

SIST EN 60238:2005/A1:2008

EUROPEAN STANDARD
EN 60238/A1

NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM

ICS 29.140.10


English version


Edison screw lampholders
(IEC 60238:2004/A1:2008)


Douilles à vis Edison pour lampes Lampenfassungen mit Edisongewinde
(CEI 60238:2004/A1:2008) (IEC 60238:2004/A1:2008)




This amendment A1 modifies the European Standard EN 60238:2004; it was approved by CENELEC on
2008-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60238:2004/A1:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60238:2005/A1:2008
EN 60238:2004/A1:2008 - 2 -
Foreword
The text of document 34B/1381/FDIS, future amendment 1 to IEC 60238:2004, prepared by SC 34B,
Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60238:2004 on
2008-08-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2009-05-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2011-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 1:2008 to the International Standard IEC 60238:2004 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60238:2005/A1:2008
- 3 - EN 60238:2004/A1:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications


In Annex ZA of EN 60238:2004 replace IEC 60695-2-2 by:
Publication Year Title EN/HD Year

IEC 60695-11-5 2004 Fire hazard testing - EN 60695-11-5 2005
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance

---------------------- Page: 5 ----------------------

SIST EN 60238:2005/A1:2008

---------------------- Page: 6 ----------------------

SIST EN 60238:2005/A1:2008



IEC 60238
Edition 8.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Edison screw lampholders

Douilles à vis Edison pour lampes

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
D
CODE PRIX
ICS 29.140.10 ISBN 2-8318-9887-0
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.