SIST EN 15534-5:2014
(Main)Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
EN 15534-5 specifies the characteristics of cladding profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external or internal use. This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding. It is not applicable to support rail profiles, cover strip profiles and fastener devices which are out of the scope of this part of EN 15534. EN 15534-1 specifies the test methods relevant to this part of EN 15534.
Verbundwerkstoffe aus Cellulose haltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder natürliche Faserverbundwerkstoffe (NFC) genannt) - Teil 5: Anforderungen an Profile und Platten für Wandbekleidungen
Dieser Teil von EN 15534 legt die Eigenschaften von Profilen und Platten für Wandbekleidungen, die aus Cellulose haltigen Materialien und Thermoplasten hergestellt sind, üblicherweise Holz-Polymer-Werkstoffe (WPC) oder natürliche Faserverbundwerkstoffe (NFC) genannt, für Anwendungen im Außenbereich oder Innenbereich fest.
Dieser Teil gilt für extrudierte Profile sowie für Platten, die durch andere Kunststoff verarbeitende Verfahren, z. B. Spritzguss, hergestellt wurden.
Dieser Teil gilt nicht für Bausätze (d. h. Profile für Stützschienen, Profile für Deckleisten und Beschläge), die außerhalb des Anwendungsbereichs dieses Teils von EN 15534 liegen.
prEN 15534 1 legt die für diesen Teil von EN 15534 zutreffenden Prüfverfahren fest.
ANMERKUNG Aus redaktionellen Gründen wird in EN 15534 die Abkürzung „WPC” für „Verbundwerkstoffe aus Cellulose haltigen Materialien und Thermoplasten“ verwendet.
Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 5: Spécifications relatives aux profilés et carreaux pour bardage
La présente partie de l'EN 15534 spécifie les caractéristiques des profilés et des carreaux pour bardage à base de matières cellulosiques et de thermoplastiques, communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC), destinés à être utilisés à l'extérieur ou à l'intérieur.
Elle s'applique aux profilés extrudés, mais aussi aux carreaux fabriqués par d'autres techniques de transformation des plastiques, par exemple le moulage par injection.
Elle ne s'applique pas aux profilés pour barres d'appui, couvre-joints et éléments de fixation qui ne relèvent pas du domaine d'application de la présente partie de l'EN 15534.
Le prEN 15534-1 spécifie les méthodes d'essai pertinentes pour la présente partie de l'EN 15534.
NOTE Pour des raisons éditoriales, dans l'EN 15534, l'abréviation « WPC » est utilisée pour « matériaux composites à base de matières cellulosiques et de thermoplastiques ».
Kompoziti iz materialov na celulozni podlagi in plastomerov (navadno imenovani lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 5. del: Specifikacije za profile in ploščice stenskih oblog
Standard EN 15534-5 določa lastnosti profilov in ploščic stenskih oblog za zunanjo ali notranjo uporabo iz materialov na celulozni podlagi in plastomerov, navadno imenovanih lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC). Ta del standarda EN 15534 velja za ekstrudirane profile in tudi za ploščice, izdelane z drugimi postopki obdelave plastike, npr. vbrizgavanjem. Ne velja za pomožne tirne profile, prekrivne profile in naprave za pritrditev, ki niso zajete v tem delu standarda EN 15534. Standard EN 15534-1 določa preskusne metode, ki se nanašajo na ta del standarda EN 15534.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verbundwerkstoffe aus Cellulose haltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder natürliche Faserverbundwerkstoffe (NFC) genannt) - Teil 5: Anforderungen an Profile und Platten für WandbekleidungenComposites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 5: Spécifications relatives aux profilés et carreaux pour bardageComposites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics products79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 15534-5:2014SIST EN 15534-5:2014en,fr,de01-maj-2014SIST EN 15534-5:2014SLOVENSKI
STANDARDSIST-TS CEN/TS 15534-3:20071DGRPHãþD
SIST EN 15534-5:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15534-5
January 2014 ICS 79.080; 83.140.99 Supersedes CEN/TS 15534-3:2007English Version
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 5: Spécifications relatives aux lames et plaques pour bardage et lambris
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -Teil 5: Anforderungen an Profile und Formteile für Wandbekleidungen This European Standard was approved by CEN on 9 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15534-5:2014 ESIST EN 15534-5:2014
EN 15534-5:2014 (E) 2 Contents Page Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Requirements .5 4.1 General .5 4.2 Material .6 4.3 Appearance .6 4.4 Physical characteristics .6 4.5 Mechanical characteristics .7 4.5.1 Falling mass impact resistance .7 4.5.2 Flexural properties.7 4.5.3 Durability of products against biological agents .7 4.5.4 Durability of the products against ageing and moisture .8 4.5.5 Thermal properties .9 4.5.6 Additional characteristics .9 5 Marking . 10 Annex A (informative)
Minimum frequencies of testing for factory production control purposes . 12 Bibliography . 13
SIST EN 15534-5:2014
EN 15534-5:2014 (E) 3 Foreword This document (EN 15534-5:2014) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and conflicting national standards shall be withdrawn at the latest by July 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document together with EN 15534-4:2014 supersedes CEN/TS 15534-3:2007. The significant changes that have been made since the previous edition are the following:
— splitting into Parts 4 and 5 of CEN/TS 15534-3:2007; — change of the status from Technical Specification to European Standard; — complete technical review of the document; — change of the scope from characterization to specification of the products. EN 15534 consists of the following parts: — EN 15534-1, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 1: Test methods for characterization of compounds and products — prEN 15534-2, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 2: Characterization of compounds1) — EN 15534-4, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 4: Specifications for decking profiles and tiles — EN 15534-5, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 5: Specifications for cladding profiles and tiles — prEN 15534-6, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 6: Specifications for fencing profiles and systems1) — prEN 15534-7, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 7: Specifications for general purpose profiles in external applications1)
1) In preparation. SIST EN 15534-5:2014
EN 15534-5:2014 (E) 4 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 15534-5:2014
EN 15534-5:2014 (E) 5 1 Scope This European Standard specifies the characteristics of cladding profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external or internal use. This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding. It is not applicable to support rail profiles, cover strip profiles and fastener devices which are out of the scope of this part of EN 15534. EN 15534-1 specifies the test methods relevant to this part of EN 15534. NOTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 927-6, Paints and varnishes — Coating materials and coating systems for exterior wood — Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water EN 15534-1:2014, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) — Part 1: Test methods for characterization of compounds and products EN 16472, Plastics — Method for artificial accelerated photoageing using medium pressure mercury vapour lamps EN ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps (ISO 4892-2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15534-1:2014 apply. 4 Requirements 4.1 General Initial type testing shall be performed to demonstrate compliance with the requirements specified in Clause 4 of this part of EN 15534. The tests according to 4.5.6 shall be carried out if the performance is declared by the manufacturer. Initial type testing shall be repeated, when
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.