Programme Management - Definition justification and qualification - A guide to drawing up the definition justification plan and of the definition justification dossier

This document sets forth the general rules applying to the justification of the definition of a product (tangible or intangible) and specifies the content of the Definition Justification Plan (DJP) and the Definition Justification Dossier (DJD).
It is applicable to all products designed and developed to fulfil the requirements of a customer expressed in a (Need) Technical Specification. Industrials are advised to apply the following principles to their own needs for justification in their internal customer/supplier relations.
Clause 5 presents the concepts and the documents associated with the justification of the definition and qualification processes.
Clause 6 summarizes the role and the contractual nature of the qualification of the definition.
Clause 7 gives details of the qualification of the definition process, while Clause 8 positions this process in the programme development logic.
The document also describes the differences between the justification and the qualification of the definition and other notions, such as verification, validation or acceptance (Clause 9).
Clause 10 is a guide to the establishment and maintenance of the documents associated with the justification of the definition and qualification processes. Information related to the certification process, even if it is out of the scope of the present document, is also presented in Clause 10, because this process has certain similarities with the justification of the definition and qualification process.
This document belongs to the documents supporting the EN 9200 relating to Project Management Specification.

Programmmanagement - Begründung und Qualifizierung der Definition - Leitfaden für die Ausarbeitung des Definitionsbegründungsplans und des Definitionsbegründungsdossiers

No Scope available

Management de programme - Justification et qualification de la définition - Guide pour l'élaboration du plan de justification de la définition et du dossier de justification de la définition

Le présent document fixe les règles générales relatives à la justification de la définition d'un produit (tangible ou intangible) et précise les contenus du Plan de Justification de la Définition (PJD) et du Dossier de Justification de la Définition (DJD).
Il est applicable à tout produit conçu et développé pour satisfaire les exigences d'un client exprimées dans une Spécification Technique de Besoin. Il est recommandé aux industriels d’appliquer les principes ci-dessous pour leurs propres besoins de justification dans le cadre de relations client/fournisseur internes.
L’Article 5 présente les concepts et les documents associés aux processus de justification et de qualification de la définition.
L’Article 6 rappelle le rôle et le caractère contractuel de la qualification de la définition.
L’Article 7 détaille le processus de qualification de la définition alors que l’Article 8 positionne ce processus dans la logique de déroulement d’un programme.
Le document présente également les différences entre la justification et la qualification de la définition et les autres notions telles que vérification, validation ou acceptation (Article 9).
L’Article 10 est une aide pour l’établissement et le maintien des documents liés aux processus de justification et de qualification de la définition. Bien qu’en dehors du périmètre du présent document, des informations associées au processus de certification sont également présentées dans l’Article 10 car ce processus présente des similitudes avec le processus de justification et de qualification de la définition.
Le présent document fait partie des documents d'accompagnement de la norme EN 9200 relative à la Spécification de Management de Programme.

Upravljanje programov - Definicija upravičenosti in razvrščanja - Vodilo za pripravo načrta za definicijo upravičenosti in dokumentacije definicije upravičenosti

Ta dokument določa splošna pravila, ki veljajo za upravičenost definicije izdelka (snovnega ali nesnovnega), ter določa vsebino načrta za definicijo upravičenosti (DJP) in dokumentacije definicije upravičenosti (DJD).
Uporablja se za vse izdelke, ki so bili zasnovani in razviti za izpolnitev zahtev stranke, izraženih v tehnični specifikaciji (potreb). Za industrijska podjetja je priporočljivo, da v svojih notranjih odnosih s strankami/dobavitelji uporabljajo naslednja načela za upravičenost lastnih potreb.
V točki 5 so predstavljeni koncepti in dokumenti, ki so povezani s postopki definicije upravičenosti in razvrščanja.
V točki 6 sta povzeti vloga in pogodbena narava razvrščanja definicije.
V točki 7 je podrobno opisan postopek razvrščanja definicije, v točki 8 pa je ta postopek umeščen v logiko razvoja programa.
V dokumentu so opisane tudi razlike med upravičenostjo in razvrščanjem definicije ter drugimi pojmi, kot so preverjanje, potrjevanje ali sprejetje (točka 9).
Točka 10 vsebuje vodilo za vzpostavitev in vzdrževanje dokumentov, ki so povezani s postopki definicije upravičenosti in razvrščanja. Informacije, ki so povezane s postopkom certificiranja, čeprav ne spadajo na področje uporabe tega dokumenta, so tudi predstavljene v točki 10, saj je ta postopek do določene mere podoben upravičenosti definicije in postopku razvrščanja.
Ta dokument spada med dokumente, ki podpirajo standard EN 9200, ki se nanaša na specifikacijo vodenja projekta.

General Information

Status
Published
Public Enquiry End Date
30-Sep-2020
Publication Date
16-Aug-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jul-2023
Due Date
23-Sep-2023
Completion Date
17-Aug-2023

Buy Standard

Standard
EN 9215:2023 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 9215:2020 - BARVE
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 9215:2023
01-september-2023
Upravljanje programov - Definicija upravičenosti in razvrščanja - Vodilo za
pripravo načrta za definicijo upravičenosti in dokumentacije definicije
upravičenosti
Programme Management - Definition justification and qualification - A guide to drawing
up the definition justification plan and of the definition justification dossier
Programmmanagement - Begründung und Qualifizierung der Definition - Leitfaden für
die Ausarbeitung des Definitionsbegründungsplans und des
Definitionsbegründungsdossiers
Management de programme - Justification et qualification de la définition - Guide pour
l'élaboration du plan de justification de la définition et du dossier de justification de la
définition
Ta slovenski standard je istoveten z: EN 9215:2023
ICS:
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9215:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 9215:2023

---------------------- Page: 2 ----------------------
SIST EN 9215:2023


EN 9215
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2023
EUROPÄISCHE NORM
ICS 49.020
English Version

Programme Management - Definition justification and
qualification - A guide to drawing up the definition
justification plan and of the definition justification dossier
Management de programme - Justification et Programmmanagement - Begründung und
qualification de la définition - Guide pour l'élaboration Qualifizierung der Definition - Leitfaden für die
du plan de justification de la définition et du dossier de Ausarbeitung des Definitionsbegründungsplans und
justification de la définition des Definitionsbegründungsdossiers
This European Standard was approved by CEN on 2 January 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9215:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 9215:2023
EN 9215:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 List of acronyms . 7
5 Presentation of the associated concepts and documents. 8
5.1 Qualification of the definition . 8
5.1.1 Purpose of the qualification of the definition . 8
5.1.2 Difference from other types of qualification . 8
5.2 Justification of the definition . 9
5.2.1 Concept .
...

SLOVENSKI STANDARD
oSIST prEN 9215:2020
01-oktober-2020
Upravljanje programov - Definicija upravičenosti in razvrščanja - Vodilo za
pripravo načrta za definicijo upravičenosti in dokumentacije definicije
upravičenosti
Programme Management - Definition Justification and Qualification - A guide to drawing
up the definition justification plan and of the definition justification dossier
Programm-Management - Festlegung, Nachweis und Qualifikation - Richtlinien zur
Erstellung des Konstruktionsstands-Nachweisplans und der Konstruktionsstands-
Nachweisunterlage
Management de Programme - Justification et Qualification de la Définition - Guide pour
l'élaboration du plan de justification de la définition et du Dossier de justification de la
Définition
Ta slovenski standard je istoveten z: prEN 9215
ICS:
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
oSIST prEN 9215:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 9215:2020

---------------------- Page: 2 ----------------------
oSIST prEN 9215:2020


DRAFT
EUROPEAN STANDARD
prEN 9215
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2020
ICS 49.020
English Version

Programme Management - Definition Justification and
Qualification - A guide to drawing up the definition
justification plan and of the definition justification dossier
Management de Programme - Justification et Programm-Management - Festlegung, Nachweis und
Qualification de la Définition - Guide pour l'élaboration Qualifikation - Richtlinien zur Erstellung des
du plan de justification de la définition et du Dossier de Konstruktionsstands-Nachweisplans und der
justification de la Définition Konstruktionsstands-Nachweisunterlage
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 9215:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 9215:2020
prEN 9215:2020 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 List of acronyms. 8
5 Presentation of the associated concepts and documents . 8
5.1 Qualification of the document . 8
5.1.1 Purpose of the qualification of the definition .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.