SIST EN 10363:2016

Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape

This European standard specifies tolerances on dimensions and shape for hot-rolled uncoated embossed steel strip and plate/sheet cut of it with a maximum width of 2200 mm and thicknesses up to 20 mm, of non-alloy and alloy steels.

Kontinuierlich warmgewalztes Riffelband und -blech abgelängt aus Warmbreitband - Grenzabmaße und Formtoleranzen

Diese Europäische Norm legt die Grenzabmaße und Formtoleranzen für kontinuierlich warmgewalztes Band und Blech ohne Überzug, in Nenndicken bis einschließlich 20 mm, aus unlegierten und legierten Stählen nach Tabelle 1 (siehe Anhang A), fest.
Weitere Stahlsorten als in der Tabelle 1 angegeben, dürfen nur nach Vereinbarung geliefert werden.
Diese Europäische Norm gilt nicht für nichtrostende Stähle.

Bandes et tôles/feuilles larmées striées issues de larges bandes en acier laminé à chaud en continu - tolérances sur les dimensions et la forme

Cette norme européenne spécifie les tolérances sur les dimensions et la forme des bande laminés à chaud en continu non revêtues avec des motifs et les tôles/feuilles issues de celles-ci dans des épaisseurs allant jusqu'à 20 mm inclus, en aciers non alliés et aciers alliés, conformément au Tableau 1 (voir aussi l'Annexe A).
Les nuances d'acier autres que celles données dans le Tableau 1 ne peuvent être utilisées que suite à un accord.
Cette norme européenne ne s'applique pas aux aciers inoxydables.

Kontinuirno vroče valjani vzorčasti jekleni trakovi in trakovi brez prevleke - Mejni odstopki mer in tolerance oblik

Ta evropski standard določa tolerance mer in oblik za vroče valjane reliefne jeklene trakove brez prevleke in iz njih izrezane plošče/pločevine z največjo širino 2200 mm in debelinami do 20 mm iz nelegiranega in legiranega jekla.

General Information

• Status: Published
• Public Enquiry End Date: 05-Oct-2014
• Publication Date: 16-Aug-2016
• ICS: 17.040.10 - Limits and fits
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 28-Jul-2016
• Due Date: 02-Oct-2016
• Completion Date: 17-Aug-2016
• Ref Project: EN 10363:2016 - Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontinuierlich warmgewalztes Riffelband und -blech abgelängt aus Warmbreitband - Grenzabmaße und FormtoleranzenContinuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape77.140.50SROL]GHONLFlat steel products and semi-products17.040.10Tolerance in ujemiLimits and fitsICS:Ta slovenski standard je istoveten z:EN 10363:2016SIST EN 10363:2016en,fr,de01-oktober-2016SIST EN 10363:2016SLOVENSKI
STANDARD



SIST EN 10363:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10363
July
t r s x ICS
y yä s v rä w r English Version
Continuously hotærolled patterned steel strip and dimensions and shape larges bandes en acier laminß à chaud en continu æ tolßrances sur les dimensions et la forme
Kontinuierlich warmgewalztes Riffelband und æblech abgelängt aus Warmbreitband aus Stahl æ Grenzabmaße und Formtoleranzen This European Standard was approved by CEN on
s w April
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u x uã t r s x ESIST EN 10363:2016



EN 10363:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Information to be supplied by the purchaser . 4 4.1 General . 4 4.2 Options . 5 4.3 Example of designations . 5 5 Form of supply and design . 6 5.1 Form of supply. 6 5.2 Design . 6 6 Tolerances for sheet/plate . 8 6.1 Thickness . 8 6.2 Width . 9 6.3 Length . 9 6.4 Flatness . 10 6.5 Edge camber . 10 6.6 Out-of-squareness . 11 6.7 Superimposement of dimensions . 11 7 Tolerances for wide strip and strip slit from wide strip . 11 7.1 General . 11 7.2 Thickness . 11 7.3 Width . 11 7.4 Edge camber . 11 8 Testing — Testing for dimensional accuracy . 11 8.1 Extension of inspection . 11 8.2 Test procedure . 11 8.2.1 Thickness . 11 8.2.2 Width . 12 8.2.3 Length of sheet/plate . 12 8.2.4 Flatness . 12 8.2.5 Edge camber . 12 8.2.6 Out-of-squareness for sheet/plate . 12 Annex A (informative)
Standards with steel grades for this dimensional standard . 14 Annex B (informative)
Indicative typical weight . 15 Bibliography . 16
SIST EN 10363:2016



EN 10363:2016 (E) 3 European foreword This document (EN 10363:2016) has been prepared by Technical Committee ECISS/TC 103 “Structural steels other than reinforcements”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 10363:2016



EN 10363:2016 (E) 4 1 Scope This European Standard specifies tolerances on dimensions and shape for continuously hot-rolled uncoated patterned steel strip and plate/sheet cut of it in nominal thicknesses up to 20 mm inclusive, of non-alloy and alloy steels in accordance with Table 1 (see also Annex A). Table 1 — Field of application Product Nominal thickness Steel grades according (but not limited) to: Wide strip (width: w
· 600 mm)a Sheet/plate cut from wide strip Strip w < 600 mm slit from wide strip
¶ 20 mm EN 10025–2 EN 10025–3 EN 10025–4 EN 10025–5 EN 10149–2 a Usually these steel products are delivered in widths up to and including 2 200 mm. For widths values w over 2 200 mm, see 4.2, Option 4.
Steel grades other than those given in Table 1 may be used by agreement only. This European standard does not apply to stainless steels. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel EN 10079:2007, Definition of steel products 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10020:2000, EN 10079:2007 and the following apply. 3.1 hot-rolled patterned steel strip hot-rolled steel strip which has been provided with a regular raised pattern (chequer or bulb) on one side to render the surface more non-slip and safer underfoot, with the reverse side usually smooth 4 Information to be supplied by the purchaser 4.1 General The following information shall be supplied by the purchaser at the time of enquiry and order: a) quantity to be supplied; b) product designation (wide strip, sheet/plate cut from wide strip, strip slit from wide strip); c) the number of this standard (EN 10363); SIST EN 10363:2016



EN 10363:2016 (E) 5 d) symbol for surface design (T, R or A) (see 5.2); e) nominal thickness in mm (see 6.1.1); f) nominal width in mm (see 6.2.1); g) nominal length in mm (for sheet/plate, see 6.3); h) name or material number of steel grade; i) edge camber requirements for strip < 600 mm wide, which was slit from wide strip (see 7.4). 4.2 Options The following additional details may be given when ordering: 1) whether trimmed edges are required (GK), (see 5.1); 2) whether for sheet/plate the tolerances on out-of-squareness and edge camber shall be replaced by a requirement that a perfect rectangle formed by the
...