SIST EN 17213:2020/oprA1:2023
(Amendment)Windows and doors - Environmental Product Declarations - Product category rules complementary to EN 15804 for windows and pedestrian doorsets
Windows and doors - Environmental Product Declarations - Product category rules complementary to EN 15804 for windows and pedestrian doorsets
This document provides product category rules (PCR) for Type III environmental declarations for windows and pedestrian doorsets as defined in EN 14351-1 and EN 14351-2. Windows and pedestrian doorsets additionally providing fire resistance and/or smoke control characteristics according to EN 16034 are also covered by this document.
NOTE 1 Windows that incorporate shutters and/or shutter boxes and/or blinds are in scope of this PCR. For any connected electrical devices (e.g. motors, sensors) -see 6.3.4.2.
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A1:2013. The document is to be used in conjunction with EN 15804:2012+A1:2013, not replace it.
NOTE 2 The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.
Fenster und Türen - Umweltproduktdeklarationen - Produktkategorieregeln in Ergänzung zu EN 15804 für Fenster und Türen
Portes et fenêtres - Déclarations environnementales de produits - Règles de définition des catégories de produits complémentaires de l'EN 15804 pour les fenêtres et blocs-portes pour piétons
Okna in vrata - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov za okna in vrata za prehod ljudi, ki dopolnjujejo EN 15804 - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17213:2020/oprA1:2023
01-september-2023
Okna in vrata - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov
za okna in vrata za prehod ljudi, ki dopolnjujejo EN 15804 - Dopolnilo A1
Windows and doors - Environmental Product Declarations - Product category rules
complementary to EN 15804 for windows and pedestrian doorsets
Fenster und Türen - Umweltproduktdeklarationen - Produktkategorieregeln in Ergänzung
zu EN 15804 für Fenster und Türen
Portes et fenêtres - Déclarations environnementales de produits - Règles de définition
des catégories de produits complémentaires de l'EN 15804 pour les fenêtres et blocs-
portes pour piétons
Ta slovenski standard je istoveten z: EN 17213:2020/prA1
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.060.50 Vrata in okna Doors and windows
SIST EN 17213:2020/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17213:2020/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN 17213:2020/oprA1:2023
DRAFT
EUROPEAN STANDARD
EN 17213:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2023
ICS 91.060.50; 91.010.99
English Version
Windows and doors - Environmental Product Declarations
- Product category rules complementary to EN 15804 for
windows and pedestrian doorsets
Portes et fenêtres - Déclarations environnementales de Fenster und Türen - Umweltproduktdeklarationen -
produits - Règles de définition des catégories de Produktkategorieregeln in Ergänzung zu EN 15804 für
produits complémentaires de l'EN 15804 pour les Fenster und Türen
fenêtres et blocs-portes pour piétons
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
This draft amendment A1, if approved, will modify the European Standard EN 17213:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17213:2020/prA1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17213:2020/oprA1:2023
EN 17213:2020/prA1:2023 (E)
Contents Page
European foreword . 3
1 Modification to the Title . 4
2 Modifications to the Introduction . 4
3 Modifications to Clause 2, “Normative references” . 5
4 Modifications to Clause 4, “Symbols and abbreviations” . 5
5 Modifications to 5.1, “Objective of this PCR” . 5
6 Modification to 5.4, “Additional information” . 6
7 Modifications to 5.5, “Ownership, responsibility and liability for the EPD” . 6
8 Modifications to 6.3, “Calculation rules for the LCA” . 6
9 Modifications to 7.2, “Declaration of environmental parameters derived from LCA” . 7
10 Modifications to 7.3, “Scenarios and additional technical information” . 7
11 Addition of new Annex A, “Requirements and guidance on the reference service life” . 8
12 Addition of new Annex B, “Waste” . 8
13 Addition of new Annex C, “Impact categories and related indicators, methodologies
and characterization factors (CF)”. 8
14 Addition of new Annex D, “End of life formulae” . 8
15 Addition of new Annex E, “Schemes to be applied for data quality assessment of
generic and specific data” . 8
16 Modifications to B.1, “General” . 8
17 Modifications to B.3, “End-of-life (EoL)” . 8
18 Modifications to Annex C, “Voluntary use stage scenario based on energy balance
calculation” . 9
19 Modifications to the Bibliography . 10
2
---------------------- Page: 4 ----------------------
SIST EN 17213:2020/oprA1:2023
EN 17213:2020/prA1:2023 (E)
European foreword
This document (EN 17213:2020/prA1:2023) has been prepared by Technical Committee CEN/TC 33
“Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by
AFNOR.
This document is currently submitted to the CEN Enquiry.
3
---------------------- Page: 5 ----------------------
SIST EN 17213:2020/oprA1:2023
EN 17213:2020/prA1:2023 (E)
1 Modification to the Title
Replace the current title with the following:
"Windows and doors — Environmental Product Declarations — Product category rules complementary
to EN 15804 for windows and pedestrian doorsets".
2 Modifications to the Introduction
Replace the 1st paragraph with the following:
"The European Standard EN 15804:2012+A2:2019 provides core product category rules for all
construction products and services. It provides a structure to ensure that all Environmental Product
Declarations (EPD) of construction products, construction services and construction processes are
derived, verified, and presented in a harmonized way.".
nd
In the 2 paragraph, replace “(cPCR)" with "(c-PCR)".
Replace the 6th and 7th paragraphs with the following:
"The EPD is expressed in a form that allows aggregation (addition) to provide complete information for
buildings. Neither EN 15804:2012+A2:2019 nor this document deals with aggregation at the building
level nor do the standards describe the rules for applying EPD in building assessment.
This document deals with a limited number of quantifiable predetermined parameters as defined in
EN 15804. Future revisions may incorporate additional predetermined parameters.".
th
In the 9 paragraph, in the list, replace:
"
— EN 15643-1, Sustainability of construction works — Sustainability assessment of buildings — Part 1:
General framework;
— EN 15643-2, Sustainability of construction works — Sustainability assessment of buildings — Part 2:
Framework for the assessment of environmental performance;
— EN 15804:2012+A1:2013, Sustainability of construction works — Environmental product
declarations — Core rules for the product category of construction products;
— CEN/TR 15941, Sustainability of construction works — Environmental product declarations —
Methodology for selection and use of generic data;"
with
"
— EN 15643, Sustainability of construction works — Framework for assessment of buildings and civil
engineering works;
— EN 15804:2012+A2:2019, Sustainability of construction works — Environmental product
declarations — Core rules for the product category of construction products;
— EN 15941, Sustainability of construction works — Environmental product declarations —
Methodology for selection and use of generic data;
".
4
---------------------- Page: 6 ----------------------
SIST EN 17213:2020/oprA1:2023
EN 17213:2020/prA1:2023 (E)
3 Modifications to Clause 2, “Normative references”
Replace:
“EN 15804:2012+A1:2013, Sustainability of construction works — Environmental product declarations
— Core rules for the product category of construction products”
With the following reference and footnote:
1
“EN 15804:2012+A2:2019, Sustainability of construction works — Environmental product
declarations — Core rules for the product category of construction products”.
Accordingly, replace in the whole document "EN 15804:2012+A1:2013" with "EN 15804:2012+A2:2019".
Delete the following references:
CEN/TR 15941, Sustainability of construction works — Environmental product declarations —
Methodology for selection and use of generic data
EN 15942, Sustainability of construction works — Environmental product declarations — Communication
format business to business
EN 15978, Sustainability of construction works — Assessment of environmental performance of buildings
— Calculation method
Replace:
“EN ISO 14044:2006, Environmental management — Life cycle assessment — Requirements and
guidelines (ISO 14044:2006)”
With the following reference and footnote:
2
EN ISO 14044:2006, Environmental management — Life cycle assessment — Requirements and
guidelines (ISO 14044:2006)
Accordingly, replace in the whole document "EN ISO 14044:2006" with "EN ISO 14044:2006".
4 Modifications to Clause 4, “Symbols and abbreviations”
Add the following abbreviations:
"
c-PCR Complementary product category rules
LCI Life cycle inventory analysis
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.