SIST EN 28318:1998
(Main)Packaging - Complete, filled transport packages - Vibration tests using a sinusoidal variable frequency (ISO 8318:1986)
Packaging - Complete, filled transport packages - Vibration tests using a sinusoidal variable frequency (ISO 8318:1986)
Verpackung - Versandfertige Packstücke - Schwingprüfung mit variabler sinusförmiger Frequenz (ISO 8318:1986)
Emballages - Emballages d'expédition complets et pleins - Essai de vibration a fréquence sinusoidale variable (ISO 8318:1986)
Embalaža - Celovita, napolnjena transportna embalaža - Vibracijski preskusi s spremenljivo sinusno frekvenco (ISO 8318:1986)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 28318:1998
01-oktober-1998
Embalaža - Celovita, napolnjena transportna embalaža - Vibracijski preskusi s
spremenljivo sinusno frekvenco (ISO 8318:1986)
Packaging - Complete, filled transport packages - Vibration tests using a sinusoidal
variable frequency (ISO 8318:1986)
Verpackung - Versandfertige Packstücke - Schwingprüfung mit variabler sinusförmiger
Frequenz (ISO 8318:1986)
Emballages - Emballages d'expédition complets et pleins - Essai de vibration a
fréquence sinusoidale variable (ISO 8318:1986)
Ta slovenski standard je istoveten z: EN 28318:1992
ICS:
55.180.40 Celovita, napolnjena Complete, filled transport
transportna embalaža packages
SIST EN 28318:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 28318:1998
---------------------- Page: 2 ----------------------
SIST EN 28318:1998
---------------------- Page: 3 ----------------------
SIST EN 28318:1998
---------------------- Page: 4 ----------------------
SIST EN 28318:1998
International Standard
INTERNATIONAL ORGANIZATION /--OR STANDARDIZATION.MEX~YHAPO~HAR OPTAHM3AUMR l-l0 CTAH~APTl43AI_IVlM~ORGANISATION INTERNATIONALE DE NORMALISATION
Packaging - Complete, filled transport packages -
Vibration tests using a sinusoidal variable frequency
Emballages - Emballages d’expkdition complets et pleins - Essai de vibra tion 5 frkquence sinusoidale variable
First edition - 1986-10-15
~~
UDC 621.798.08 : 620.178.3
Ref. No. ISO 8318-1986 (E)
Descriptors : packing, transport packing, complete-and filled packages, tests, Vibration tests.
Price based on 2 pages
---------------------- Page: 5 ----------------------
SIST EN 28318:1998
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 8318 was prepared by Technical Committee ISO/TC 122,
Packaging.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1986
Printed in Switzerland
---------------------- Page: 6 ----------------------
SIST EN 28318:1998
ISO 83184986 (E)
INTERNATIONAL STANDARD
Packaging - Complete, filled transport packages -
Vibration tests using a sinusoidal variable frequency
4 Apparatus
1 Scope and field of application
This International Standard specifies two methods for carrying
4.1 Vibration table, of sufficient size, rigidity and mass-
out a Vibration test on a complete, filled transport package
carrying capacity, supported on a mechanism that will maintain
using a sinusoidal variable frequency. These tests may be used
the surface horizontal during Vibration. The differente in
to assess the Performance of a package in terms of its strength
surface level between the table extremities shall not exceed
or the protection that it offers to its contents when it is
10 mm.
subjected to vertical Vibration. Esch may be performed either as
a Single test to investigate the effects of vertical Vibration or as
The table may be equipped with
part of a sequence of tests designed to measure the ability of a
package to withstand a distribution System that includes a
a) low fences to restritt sideways and endways movement
Vibration hazard.
during testing;
NOTE - A Vibration test for complete, filled transport packages using
b) high fences or other means of maintaining a super-
Vibration at a fixed low frequency (of between 3 and 4,6 Hz) is given in
imposed load in Position on the test package during testing;
ISO 2247.
c) means to simulate the method of restraining the
package during transit.
2 References
In addition, the apparatus shall meet the requirements and
tolerantes of clause 7.
ISO 2206, Packaging - Comple te, filled transport packages -
lden tifica tion of Parts when testing.
4.2 Instrumentation, comprising accelerometers, Signal
conditioners and data display or storage devices to measure
Comple te, filled transport packages -
ISO 2233, Packaging -
and control the accelerations at the test surface. The in-
Conditioning for tes ting.
strumentation System shall have a response accurate to within
+ 5 % over the frequency range specified for t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.